Smart Strip Advanced Paint Remover - Strips Up to 15 Layers of Acrylic, Latex, Oil, & Water-Based Paints, Varnishes, Stains, & Coatings Usually in One Application - DIY Friendly - 1 Gallon
▲You Will Get: 1pc 110V 1200W burnishing polishing machine, 1pc 80#, 1pc120#, 1pc240#, 1pc360# Fleece (Nonwoven) burnishing wheel and our best service..
▲Function: For tarnishing, burnishing, and polishing stainless steel and nonferrous metals.
▲Applied for: For removing rust, oxide layers, scratches, applied for stainless steel, steel non-ferrous metals, plastic, and wood on the grinding, polishing, fine polishing (mirror work), for using on cast iron, steel, stainless steel, and nonferrous metals.
▲Feature: With double isulated to prevent electric shock structure, use the dtring of single-phase motor driver with large power, the work quicker and more convenient, more secure features..
▲Use Tips: To keep the workplace cleam and adequate lighting. before operating, please examine carefuly and see if there is any crack or damage..
Hardin WVPOLSET 4 Inch Var Speed Polisher and 8 pc 4 Inch Diamond Polishing Pad Set
...ss the lock switch for continuous operation,you don't need to hold down the trigger while burnishing,so as to reduce the working strength and fatigue of fingers.
【Wide Application】-- Widely used for removing rust,oxide layers,scratches,ect.Applied for burnishing and polishing metal,stainless steel,wood and other nonferrous materials. More wheels needed,pls click : https://www.amazon.com/dp/B096LZGVYB?ref=myi_title_dp.
More carbon brushes needed,pls click : https://www.amazon.com/dp/B09C5D3SHG?ref=myi_title_dp.
Accusize Industrial Tools Over and Under Sizes 0.1240'' Thru 0.5010'' HSS M2 Premium Chucking Reamer Set, Right Hand Cut, 14pcs/Set, 5528-SX00
Over & Under Sizes — 0.1240" thru 0.5010".
Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.
tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Accusize Industrial Tools 29 Pc Set 1/16 to 1/2 inch by 1/64 in HSS M2 Premium Chucking Reamers Straight Flute Aluminum Case 5528-SF00
29 PC Set: 1/16'' through 1/2'' By 64ths, Fractional size.
Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.
4Pcs Drill Bridge/Construction Reamer Bit Set 3/8 1/2 5/8 3/4 with 1/2 Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole with Aluminum Box
What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
【Specifications】- Cutting Dia.: 3/4". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
【Round Shank】- Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
【Application】- Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
High Precision Industrial Grade Spiral Reamer 1:10 Hss Steel, Conical Handle Hinge Hinged Die Processing Tool 8 X 12 X 40mm
Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.
Overall length: 91.2mm / 3.59". High-speed steel tool is good for general purpose applications, with combination of hardness and toughness for wear resistance.
Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
Round Shank: Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
Application: Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers.
