Best Rectangular Steel Tube Pipe

JY Performance 5PCS 2.5 T304 Stainless Steel Custom Exhaust Pipe Kit Tubing Mandrel Bend Pipe Straight & U-Bend Universal

  • This Universal T304 Stainless Steel Custom Exhaust Kit Made of High Quality T304 Stainless Steel with Computerized Mandrel-Bends for Strength and....
  • 2 X 15'' Straight Pipes, 1 X 180° Pipe, 1 X 90° Pipe, 1 X 45° Pipe..
  • Each 2.5" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation..
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
  • Best Value T304 Stainless Steel Exhaust Pipe Kit..
Check Stock

Copper pipe cutter, aluminum pipe cutter, galvanized pipe cutter, stainless steel pipe cutter, cutting pipe diameter 4-28mm

  • The blade is made of 65Mn special steel, which can cut the pipe accurately and sharply..
  • It can cut copper pipe, titanium pipe, stainless steel and aluminum pipe..
  • The blade can keep rolling in the same circle when cutting..
  • [Cutting tube thickness] less than 1.5mm, blades can be replaced, high-quality blades have a longer service life.
Check Stock

B/M Stainless Steel Chimney Spark Arrestor Rain Cap for 2.36inch/6cm Stove Pipe

  • Fire resistance: The top of the fire resistance tube is closed and there are mesh holes around it to prevent some sparks from flying out. The enclosed top also ensures that rainwater does not flow into the fireplace from the furnace pipe when it rains or snows..
  • With 3 Fixed Rings: There are 3 rings at the bottom of the flame arrester, and you need to prepare 3 resistant hot wire fixed. Installed after the flame arrester will not worry about the wind weather..
  • Thickened Stainless Steel: Straight tube thickness of 0.5mm. Stainless steel material can be very good rust resistance..
  • Tight Connection: Elbow and straight pipe (not included) are tightly connected and can be used together..
  • Suitable Size: Straight tube length is about 10.31in/26.2cm, and the diameter 2.36in/6cm..
Check Stock

PAGOW 5PCS Spring Tube Benders Set for Pipe O.D 1/4 5/16 3/8 1/2 5/8 5 in 1 Tube Bender Kit for Copper Aluminum,Thin-Wall Steel Tubing

  • Best Compatibility : 5PCS different outer diameter spring tube benders are prefect suitable for 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, and 5/8 inch....
  • Wide Application: The 8.3 inches long spring tube benders set can be applied for copper pipe, aluminum pipe, thin-walled steel pipes, etc, which will....
  • Durable Material: These spring tube benders adopts a durable oil hardened and tempered spring steel with a zinc-plated finish, which is anti-rust,....
  • Main Function: These flexible spring tube bender are designed for bending thin-wall tubing, copper and soft metals to the angle (up to 180 degrees)....
  • The end design of flare makes sliding easier, and spring will back to original smoothly after used..
Check Stock

1.5\ Tri Clamp Ferrules, SS304 Long Weld Clamp Ferrule for Sanitary Fittings 2PCS

  • Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Fit for all other homebrew stuff sanitary fittings..
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • ...aust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to t....
Check Stock

Libraton Copper Cutter, Tubing Cutter with Deburring Tool Heavy Duty Mini Pipe Cutter for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean. Strong corrugated knob for comfortable stable operation..
  • [Wide Application] The copper tube cutters' cutting range is up to 2" (50mm)(OUTER DIAMETER). The Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
  • [Easy To Operate]: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock

Mini Copper Pipe Tubing Cutter, Mini Pipe Cutter, Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • 【Premium Material】: Tube Cutter body is made of lightweight and durable Aluminum Casting, Blade is built using CNC machining with the most durable and high quality alloy steel..
  • 【Wide Application】: This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops..
  • 【Multiple Uses】: Our pipe cutter tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminum piping, PVC and iron..
  • 【Easy Operation】: Twist the bolt to adjust the cutting diameter and complete cutting.
  • the non-slip ergonomic design allows better handling and powerful turning, adding comfort and making everything under control..
  • 【Adjustable Size】: The tubing cutter has a cutting capacity from 1/8"-1-1/8"(3-28MM). Adjustable cutting depth designed for fast and safe cutting. Works well and makes precise cuts..
Check Stock

Libraton Pipe Cutter, Tubing Cutter 3/16\ to 2\ Outer Diameter, Copper Pipe Cutter, Tube Cutter with Deburring Tool, Copper Cutter, Pipe Cutter Tool for Copper, and Thin Stainless Steel Tube with 2PCs

  • [High-quality Blade] Libraton pipe cutter blade is wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes. Also includes 2 replacement blades..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

W4-Moto 12 Ton Heavy Duty Hydraulic Tube Bender 180 Degree Tubing Metal Steel Iron Exhaust Pipe Bending with 6 Dies Sets 1/2",3/4",1",1-1/4",1-1/12",2" (RED)

  • 【Stable Base & Solid Structure】Made of premium steel, this tube bender is heavy duty to hold up to 12 ton weight capacity. And the hydraulic system and pull-back spring system help you get the bending job done efficiently.Tube bender is suitable for most kinds of metal tubes, and it can easily and efficiently help to bend any type of pipes. Therefore, it is popularly used for power construction, road building, bridges or ships pipeline laying or repairing..
  • 【6 Adjustable Roller Levels 6 Dies】Bending bars can easily be adjusted to distances of 8-1/2", 11-1/4", 12", 16-3/4", 19-1/2" and 22-1/2", so you can adjust the top rollers for degree of bend to meet the bending angle of the tube.Except the pipe bender, the package includes 6 precision cast dies of 1/2'', 3/4'', 1'', 1-1/4'', 1-1/12'' and 2". So you don’t need to buy dies, this pipe bender is able to fully meet all your needs..
  • 【180 Degree Bending】Compared to other bender that only can bend tube to 90 degree angle, our pipe bender can bend tubing to angles up to 180 degrees smoothly so that reduce your workload ....
Check Stock