Red Dot Sight，4 MOA Reflex Sight，Multi Coated/Adjustable Brightness Red Dot Scope，Pistol red dot Sight for Day & Night Time，Rifle Scope with Glock Mount Plate and Picatiinny Rail Mounts
【Red dot sight】This little reflex sight by inxaric offers 6 levels of brightness to work in bright and dim lighting with equal ease.
【User-friendly design】Inxaric red dot scope was designed to be easy to install, fully adjust the dot, windage & elevation quickly ，Can be easily....
【High-quality mirco red dot sight】This pistol and rifle sight's anodized aircraft aluminum construction，O-ring sealed，resists shock, wear,....
【Built to Last and Complete accessories】the shockproof reflex Sight has been tested for 1000 rounds on all types of guns without losing....
✔【Satisfaction guaranteed】--Including glok plate and Picatinny rail mounts, suitable for glocks and product with Picatinny rails，If there is....
TAC Vector Optics Micro Red Dot Sight 3 MOA Reflex Sight Mini with 8 Levels and Picatinny Mount Hold to Zero (Frenzy 1x17x24 )
Easy to Zero in and mount:it’s held its zero perfectly and great for pistols and rifles.Do not fit for RMR..
Comes with Weaver/Picatinny mount, adaptive base footprint compatible with Glock MOS , also compatible with different pistols mounting plates that replace rear sight dovetail, Vector Optics model SCRD-19II,SCRD-35,SCRD-40,SCRD-10A,SCRD-10B,SCRD-10C are designed to fit footprint of plate made for VT Venxx, BU FF, Docter etc any plate made for those brands also fits this sight..
3 MOA dot: It promotes rapid target acquistion while providing a precise point of aim.
getting shots down range and on target fast.
Well Made Red Dot:The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while quality coatings protect your lens from oil, dirt, and scratches..
Great red dot sight with lightweight:This red dot sight with compact design, This sight won’t negatively affect your firearm balance of handling.Pls make sure when installed,pls make sure plate level are correct in the pistol slide when installed.We are the professional manufacturer of the rifle scope,red dot and mount hardware.If there is any Parts missed or broken,Contact Us Via Amazon Mail ,A new replacement or money back guarantee..
Pinty Pro 3 MOA Red Dot Sight with Built-in Picatinny Weaver Rail Mini Red Dot Reflex Sight
RED DOT SIGHT: This reflex sight by Pinty offers a red dot reticle with 5 brightness levels to work in bright and dim lighting with equal ease, allowing you to enjoy a wide field of view in any setting.
USER-FRIENDLY DESIGN: Easily adjust for windage and elevation with the provided tools.
slot on and off any firearm with standard Weaver or Picatinny rails thanks to the detachable rail mount.
and enjoy up to 1000 hours of continuous use from the included CR2032 battery.
DURABLE CONSTRUCTION: This pistol and rifle sight’s anodized aluminum construction resists shock, wear, tear, and corrosion at a lightweight 2.3 oz.
the carefully ground lenses are fully multicoated to remain scratch resistant and crystal clear regardless of rain, fog, and other tricky conditions.
WIDE APPLICATION: Our red dot sight’s 3 MOA dot size and 3′ parallax ensure accurate and efficient close and midrange targeting ideal for home defense, tactical and LE use, hunting, plinking, and any competitive shooting where magnification isn’t required.
BROAD COMPATIBLITY: The mounting plate can be replaced to fit most major handguns, including Glocks, Smith & Wessons, and more.
[TASCO PROPOINT] is a quality optics line designed in the USA, shipped all over the world. Today, Tasco offers telescopes and other optics such as spotting scopes and binoculars, as well as rifle sights and accessories..
[PROPOINT] is a do-all RED Dot designed fro the hunter, for range use, or plinking. 3 MOA with 6 brightness settings..
[RUGGED CONSTRUCTION] Designed, constructed, and tested to withstand the recoil energy of a rifle. Solid aluminum construction..
[FEATURES] Versatile mounting options for shotgun, MSR, or pistol. Multi-coated optic. Adjustable illumination..
This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Vector Optics Sphinx Mini Red Dot Scope Sight Mount Base for Pistol Glock M1911 SIG Sauer P226 Baretta 92 Springfield XD Smith & Wesson M&P HK USP Black Glock
Designed for GLOCK pistol to fit Vector Optics Sphinx Red Dot Sight or Green Dot Sight, Vortex Venom, Burris FastFire and similar style mini Red dot....
Lightweight, Shockproof, Weatherproof. Designed for real fire caliber..
Full metal, heavy duty. Made of high quality 6061 T6 aluminum alloy in durable black matte finish..
Remove your rear sight before installing the mount base. Including 2 screws, 1 steel bar and 1 plate..
TuFok Sight Mount Plate - G17 19 22 23 26 27 34 Rail for Install Pistol Red Dot Sight fits Bushnell Trophy TRS-25 Red Dot Sight,OTW Red Dot Sight Black
✔ PINPOINT ACCURACY – The UUQ HD1079 puts an unmistakable red dot at the point of impact within your field of view, giving you an immediate advantage in speed and accuracy..
✔2MOA RED DOT– 2MOA Red Dot and 7Brightness Setting,Adapt to Various Light Environments..
✔ DURABLE ALUMINUM CONSTRUCTION– Rugged aircraft-grade, extruded aluminum housing ensures the optical glass and internal components are protected against firearm recoil and rough field use. Detent windage and elevation adjustments let you reliably adjust your sight with 1 MOA per click increments...
✔ MULTI-LAYER COATINGS–UUQ optics are manufactured using optical glass with multi-layer coatings applied to facilitate maximum light transmission and wear resistance while reducing glare, making for a great addition to your tactical gear..
✔ VERSATILE DESIGN MOUNTS ON PISTOLS, RIFLES, AND SHOTGUNS–The UUQ HD1079 Reflex Sight use integrated mount for standard 20mm Picatinny or Weaver rails which will not loose, made to last.Alternatively, replace the original pistol physical sight with an inculded low profile mounting adapter and mount the red dot sight on its top.Please pay attention to the size of adapter and make sure it fits your gun..
