Best Reduce Port

Headphone Splitter, Dual Port 3.5mm Audio Splitter AUX Cable KOOPAO Nylon-Braided 3.5mm Male to 2 Female Y Splitter Cable Dual Headphone Jack Splitter for 3.5mm Standard Headphone Jack

  • ...peakers that have 1/8 auxiliary jack port..
  • 【Hi-Res Sound Quality -- For Both Headsets】This USB C to dual 3.5mm aux splitter use built-in newest Realtek DAC chip which will stable decoding 32bit / 384khz sound quality signal & Losslessly transmit them to the 2 headsets you connected, Without a single bit quality reduce !! SNR 100+dB!.
  • 【Durable & Flexible Nylon Design】 This USB-C to dual 3.5mm aux splitter uses alloy Interface and high quality copper wire to ensure high strength, durable and tangle free. High-strength nylon braided offers a good anti-pull resistance function. Premium aluminum shell makes the cable more durable,wear-proof and corrosion-proof as well as anti-interference..
  • 【Customer Service】PLEASE CONTACT US IF YOUR ITEM NOT WORKING We will appreciate if you contact us by amazon message if you have any question,we will reply within 24 hours..
Check Stock

FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3' x 2.8'

  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....
Check Stock

LC LICTOP Brass Sintered Bronze Breather Vent Flat Pneumatic Muffler Filter,1/4" NPT (Pack of 10)

  • Easy to install and high lift to reduce results, fast and reliable connection.
  • They are suitable for manual valves, solenoids, exhausts, vacuum generators, crankcases, steering boxes..
  • The silencer/muffler is used to reduce the dynamic noise of the exhaust of pneumatic components or equipment..
  • Commonly used in single-acting cylinders or valves to prevent dust and foreign particles from entering the port to the atmosphere..
Check Stock

Rockville Apm10b 10' 400W Powered/Active Studio Subwoofer Pro Reference Sub

  • ...ifier Circuitry with Auto-Switching Power Supply. LED Power on/Stand-by Indicator on Rear Panel.
  • Rubber woofer surrounds increases sound quality and eliminates unwanted distortions. Computer Optimized Electronic Crossover Network filters out Highs and Mids. Front-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!.
  • Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound! Transducer Production Line to Make the SPL Performance Stable. Shiny metal mesh grill.
  • Crossover Frequency Control allows you to adjust low frequency input: 50Hz – 150Hz. ¼” TRS input jack. Left and Right XLR input/outputs. RCA input/outputs. Woofer Impedance: 8 Ohm. Frequency Response: 34Hz - 150 KHz. 10" woofer with rubber surround and paper cone with painted.
Check Stock

BAIRONG USB Internal Motherboard Header Cable USB 9pin Male to Female Internal Motherboard Header Cable

  • Flexible PVC sheath, flexible and durable, environmental protection, length: 20.3 inches/515mm..
  • Jumpers can reduce the stress on the rear USB expansion board or the front panel USB port and the connection between the expansion card and the motherboard port and eliminate stress..
  • USB motherboard cable The 9-pin motherboard PCB is a 9-pin 2.54 mm pitch male-to-female motherboard extension cable..
  • Note: The color of the wire is different due to different batches, but the wiring contact and the card position are in the same position, which will not affect the function of the product..
  • Package included: 1 x USB 2.0 Internal Motherboard Header Cable..
Check Stock

Set of 4 Duracell MN9100/E90/LR1 Medical Battery 1.5 V Card 2 Size N

  • 【Wide Use】Perfect for a wide variety of household uses: Such as alarm clocks, digital cameras, and universal remotes.
  • 【Recycled&Long Battery Life】Avoid wasting money on one-time use disposable alkaline batteries ,rechargeable batteries can be constantly recharged and reused..
  • 【Multiple Charging Options】LED Display Charger,Forever charge your battery,with type c port and micro usb port,can be charged by power.
  • 【Safety Protections】 - Advanced MCU control and -∆V function, over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection.
  • 【Environment Friendly】Ni-MH environmental protection material reduce heavy metal pollution.
Check Stock

Klutchtech Tesla 2021 2022 2023 Model 3/Y Glove Box USB Hub, 4-in-1 USB Hub Glove Box Dash Cam Flash Drive Docking Station Compatible with Tesla Model Y Model 3 Accessories -Convex

  • Ultimate Solution For Model 3/Y: Shortage of parts and chips caused Tesla continuously reduce configuration. The USB port inside the glove box become the only data interface for some vehicle. This 4 in 1 glove box USB hub is the final solution for Tesla owner..
  • Big Expansion: Transform one glove box USB port into four with this 4 in 1 USB hub. Instantly add one USB-A 3.0 for original Dashcam/Sentry mode flash drive ONLY, two USB-A ports for data transmission & maximum 7.5W power output, one USB-C port for data transmission & maximum 7.5W power output..
  • Multi-Function and SuperSpeed Data: two black USB-A ports support HDD & SSD hard drive (FAT) at blazing speeds up to 5Gbps. Use the USB hub to connect wireless game controllers for driver and passenger, listen to FLAC music or save boombox audio. With the maximum 7.5W power output, more possible functions are available for you to discover..
  • Advanced Chip & No Alert: Compare to similar USB hubs on the market, this glove box USB hub is equipped with automobile grade chip for Tesla vehicle. No error will be reported on your center screen when plug in the original....
Check Stock

Barber Travel Backpack, Hair Stylist Bag for Clippers and Supplies,with USB Port

  • ... use it to work flexibly or travel daily..
  • 【SAFER STORAGE FUNCTION】 The thicker filling inner layer can well prevent vibration from cracking or falling. The flexible zipper will make it easier and faster to retrieve items. The backpack design can release your hands and reduce the pressure on your hands..
Check Stock

2 Sets Resistive Soil Moisture Sensor, Icstation Humidity Detector, with Corrosion Resistant Probe, Digital Analog Signal Output for Arduino Garden Automatic Watering System

  • 【Soil Moisture Meter】The probe uses analog resistance to detect the moisture content of the soil. It is a good plant helper to make you know if your plants are thirsty and it can also be used in the automatic watering system, garden, greenhouse, etc..
  • 【Easy to read】Digital value output,this soil moisture detector outputs a low level from the DO port when the detecting humidity reaches the threshold value. Good to work with Arduino/Raspberry Pi..
  • 【Adjustable Threshold】Clockwise/counter-clockwise rotate the blue potentiometer to increase/reduce the detection threshold. On-board power and signal indicators make you know the working status of the board at a glance at any time..
  • 【Analog Value Output】The AO port on the soil humidity sensor outputs an analog value(voltage), and you can acquire the real-time data via the AD port of your single-chip microcomputer(MCU)..
  • 【Corrosion Resistant Alloy Probe】A waterproof sensor probe with high corrosion resistance ensures a long lifetime of at least 6 months in the soil..
Check Stock

POWERTEC 70189 Dust Collector Y-Fitting | 6-Inch to 4-Inch Hose Reducer for Woodworking Dust Collection System

  • INCLUDES: (1) Y-Type Dust Collection System Fitting.
  • FUNCTION: This three-hole connector allows you to reduce down from a 6” port (or main line) onto 4 inch branches. Can be used as a replacement....
  • FEATURES: The 6” opening is a female port and works with 6” OD pipe or other male ports. Dual 4” OD ports to accommodate dust collector hose....
  • PRO BUILD: Made with high quality ABS plastic material designed for strength and durability – Able to withstand dust, debris and other abrasives....
  • SPECS: 6-Inch nominal end measures 6-23/64-Inch O. D. and 6-Inch I. D. Both 4-Inch nominal ends measure 3-61/64-Inch Outer Diameter. and 3-23/32-Inch....
Check Stock