Maxx Flex (1 1/2' Dia. x 25 ft) - HydroMaxx® White Flexible PVC Pipe, Hose, Tubing for Pools, Spas and Water Gardens
Very Flexible, ideal for working in confined areas. Crush and impact resistant..
Reduces the number of required fittings and permits the installer/user to make smooth, tight turns, thus, Saves time, labor and cost..
True Schedule 40 PVC Pipe. Uses Standard Sch 40 Fittings and PVC Glue and can be connected to rigid PVC with ease.
Sun, ozone (UV) and chemical resistant, Coils easily for storage and transportation.
Smooth inside and out - permits unrestricted flow, reducing operating costs. Precisions outside diameter (standard IPS size) is designed to be glued into standard Schedule 40 PVC fittings..
only fire 12 Ft 3/4' ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Grill,Generator,Patio Heater,Pizza Oven,etc
Hose Connection: 3/4" Male quick discount plug x 3/4" Male pipe swivel.
Quick Connector: 3/4" quick connect x 3/4" Female pipe thread.
12FT gas hose , outside 100% solid brass and rubber fittings, long-lasting and sturdy. Provides secure, tight connection between grill or fire pit and tank.
Functions effectively with natural or liquid propane gas. Unites LP grills, natural gas grills and RVs to permanent fuel sources.
Use for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). Automatically shut off the flow when pipe is removed, via the Quick disconnect adapter.
MR CARTOOL T130 Automotive EVAP Smoke Machine, Dual Mode 12V Car Fuel Pipe System Leak Tester Detector with Oil Level and Adjustable Flowmeter for All Vehicles
... Tank System, Turbo Leaks and Various Pipe Fittings. NOTE: Not suitable for air conditioning system piping..
【Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
【Flowmeter, Oil Level Meter & Pressure Gauge】Equipped with pressure gauge, oil level meter and adjustable flow meter. All data are clear at a glance, which helps you better control the smoke effect. Built-in overheat protection, if it exceeds 176°F, it will automatically turn off the power..
【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Various of Soft Rubber and Hard Rubber Hose Plugs..
【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money! If you have any issues about the EVAP Leak Tester, don't hesitate to contact us ....
1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)
HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....
MR CARTOOL T110 Automotive EVAP Smoke Machine, 12V Car Fuel System Leak Tester Detector with Built-in Vacuum Pump & Pressure Gauge & Air Flow Meter for All Vehicles
...m, Fuel Tank System, Turbo Leaks and Various Pipe Fittings..
【Air Mode & Smoke Mode】Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min..
【Flow Meter & Pressure Gauge】Equipped with pressure gauge and adjustable flow meter to help maintenance personnel to observe the current flow volume and pressure for better control the smoke effect. Built-in over-heat protection, if it exceeds working limit (Over 176℉), it will power off automatically..
【Complete Set】Comes with 4.92ft Smoke Hose, EVAP Special Connector, Standard Cone Adapter, Power Cord Clamp, Valve Core Wrench, Airbag Adaptor, Rubber Connector Part, 3.38oz Empty Bottle for test oil(Please notice: Package does not includes the baby oil), Hanging Hook, Various of Soft Rubber and Hard Rubber Hose Plugs..
【Worry-Free After-Sales】MR CARTOOL offers 24-month warranty and 7x24 hours friendly customer service to ensure your shopping....
TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter
Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
Maximum Pressure —— Maximum working pressure is 2800PSI..
Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
NEW MSD HIGH PRESSURE ELECTRIC FUEL PUMP,45 GPH AT 60 PSI.375" HOSE NIPPLE INLET & OUTLET
Brand New MSD High Pressure Electric Fuel Pump, 45 GPH at 60 PSI, .375" Hose Nipple Inlet & Outlet (Part #2225)..
This high pressure and high flow Fuel Pump features a roller vane pump mechanism which is extremely resistant to clogging & jamming. The pump mounts in-line (out of the fuel tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. Ideal for use as a "booster" for nitrous oxide applications, or as a stand alone pump for multi-port EFI systems on engines up to approximately 525 HP. Capable of 45 GPH at 60 PSI..
NOTE: Compatible for Lеаded and Unlеаded Fuel Only.
