GOONSDS Pure Nickel Plate Sheet Foil 99.9% Nickel Metal Foil Roll,Silver,0.03 x 100mm x 1m
Pure Nickel: The has a Nickel content of 99.9% giving it a pure nickel rating.
In high drainage applications, pure nickel will not corrode.
Soldering And Welding: Pure Nickel Strips are mainly used in the battery welding and soldering field due to the fact that they can easily be soldered and welded.
Oxidation resistance:Pure nickel is widely used in our daily life due to its outstanding oxidation resistance, corrosion resistance, low resistance and high conductivity..
Suitable : Pure Nickel Strips are mainly used in the battery welding and soldering field due to the fact that they can easily be soldered and welded.
Multifunctional use : electrical, light industry, machinery manufacturing, construction industry, chemical experiments, etc.
CS Unitec | Copper-Beryllium Phillips Head Industrial Screwdriver | Non-Sparking, Non-Magnetic, Corrosion Resistant | 3.5mm Tip x 4\ Round Shank, TUV Certified
CUSHION GRIP HANDLE: Flat head 4" length x 3/16" tip, Lanyard hole size .194".
NON-SPARKING: Specially manufactured with Copper- Beryllium alloys alloys for Non-Sparking, Non-Magnetic, and Corrosion Resistance. Safe to be used in hazardous environments, ATEX and EX Zones..
INDUSTRIAL QUALITY: Screwdrivers are designed to eliminate the risk of sparks at sites where explosive atmospheres may be present such as flammable or combustible vapors, liquids, dusts or residues..
NON-METALLIC: These alloys make them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets..
LIFETIME WARRANTY: Advanced forging technology ensures the high quality and refined appearance of all our products. We are offering warranty against breakage or performance failure under normal use..
WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger
Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
6.56FT Inert Gas Welding Hose, Argon Flowmeter Gas Regulator Welding Hose, TIG MIG Gas Hose, 5/8\ UNF-18RH Fittings
Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
Inert Gas Welding Hose Argon CO2 Flow Meter Regulator Adapter Hose 5/8" UNF-18RH Fittings 6.56 10 15 20 30 FT.
The hose length is 6.56 Feet, crimped standard 5/"8 UNF-18RH inert gas fittings on each end. 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
The hose connector compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
Best suitable for our OYHBO Argon Flow Meter Regulator. If you want to purchase the Regulator together, you can ask our customer service. Thanks!.
Miracle Sealants Haze B Gone Glove-Pouch Removes Grout Haze of Tiles - Coverage 1000 SqFt Refills
A high power blend of acids formulated to remove rust stains from concrete, fiberglass, stone, tile as well as brass..
Removes rust, welding scale, heat marks , light oil and shop soil from carbon steel and iron. It is also effective for removing light oxide and tarnish from brass, copper or copper alloys (brass, bronze and monel)..
It produces a hard thin surface conditioning on steel that serves as an excellent base for paint or other coatings..
YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.