Best Resistivity

Pure Copper Braided Earth Bonding Strap with Squar Lugs/Bare Copper Flat Braided Grounding Strap / 5PCS (12

Material : Copper ( T-2 ) ,Length : 12 inches (300MM),Terminal Lugs : 6-8,.
General purpose Flat Bare copper braids,Recommended by EMC/EMI directives.
Electrolytic copper Cu-ETP according to standard EN13602,UL Listed (UL467) except BJ,EAC certificate,RoHS 2002/95/EC Compliant.
Copper purity of minimum 99.9%,Maximum resistivity of 0.017241 mm2/m at 20C,Bends very close to the contact area.

Mixed Viscosity 6800 cP, Density gm/cc 2.35, Silver percentage 65-75.
Mechanical Properties Hardness, Shore D 83, Pot Life 6 months At 25 °C 9 months refrigerated.
Sheet Resistivity 10-12 m?/sq, Lap shear strength 2000 Lb/in2.
Cure Time 0.7 hours At 200 °C, 1.5 hours At 180 °C, 2.5 hours At 160 °C.

Antistatic ESD Safe, Static Dissipative Solvent Dispensers with Stainless Steel Pump.
Purity Pump will not allow standing fluid to reenter the bottle.
Bottle has an average surface resistivity of 10 raise to power 9 to 10 raise to power 10 ohm per square and will dissipate a static charge of +/- 5000V in less than two seconds.
Used for dispensing acetone, isopropanol alcohol, and other such solvents.

Antistatic ESD Safe, Static Dissipative Solvent Dispensers with Stainless Steel Pump.
Purity Pump will not allow standing fluid to reenter the bottle.
Bottle has an average surface resistivity of 10 raise to power 9 to 10 raise to power 10 ohm per square and will dissipate a static charge of +/- 5000V in less than two seconds.
Used for dispensing acetone, isopropanol alcohol, and other such solvents.

Multiple protection, no fear of hot, intelligent adjustment, no damage to the battery and circuit board..
Through increasing the cell area to reduce resistivity effectively for faster charging..
Environment friendly and non-polluting battery with no bulging..
Multi-level protections with the memory metal fuse, and during short-circuit, automatically rebound after the temperature is normal..
This phone battery is designed for iPhone 5/5S..

RVV Wire Cable insulated and PVC coated copper ensures flexibility, insulation and corrosion resistivity..
The cores coated in different colors can be easily identified and installed. Widely used for car, solar, RV and inverter..

【Short Circuit Protection】Multi-level protections with the memory metal fuse, and during short-circuit, automatically rebound after the....
【Environmentally Friendly 】Environment friendly and non-polluting battery with no bulging..
【Excellent Performance】Through increasing the cell area to reduce resistivity effectively for faster charging..
【Intelligent Adjustment】Multiple protection, no fear of hot, intelligent adjustment, no damage to the battery and circuit board..
【Specially Designed】This phone battery is designed for iPhone 5/5S..

Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
Mechanical Properties Hardness, Shore D 83 Adhesive.
Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
Mix Ratio, parts by weight 100/5 Resin/Hardener.

Outstanding resistance to long-term exposure to sunlight and weathering..
The linear dimensions of our sheets are nominal and they have a tolerance of +-1/8" in each direction (length and width). Therefore the dimensions you....

Outstanding resistance to long-term exposure to sunlight and weathering..
The linear dimensions of our sheets are nominal and they have a tolerance of +-1/8" in each direction (length and width). Therefore the dimensions you....