➨ Used to raise and lower the legs of the landing gear. ❀Universal and can be used with any motor. ❀ 12g wire and 30 amp in-line fuse - 4 wire Install (2 for motor / 2 for battery).
➨ Heavy duty water tight switch ❀ Switch is labeled extend and retract for no guessing operation.
➨ If you are converting you manual system over to a motorized system this harness is a must..
➨ You must use 1 switch per 1 motor. ❀ Items are purchased in bulk quantities so no retail box..
Greartisan DC 12V 60RPM 7Kg.cm 8mm Single Shaft Self-Locking Reversible Worm Gear Motor with Cable, High Torque Speed Reduction Motor, Turbine Electric Gearbox Motor
【High Torque & Lower Noise】: Long carbon brush high life, high precision gear design, small size, high torque, low noise, high efficiency..
【Positive-Negative Rotation】This type is miniature High Torque Electric Worm Gear DC Motor, which can change shaft rotation direction while the wiring positive andnegative be changed..
【Self-Locking】: Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock..
【Versatile】: The reducer output shaft arranged vertically with the motor shaft, whole motor output is relatively short,can be widely used in various of occasions that require special installation size..
【Application】: Boat, Car, Fan, Home Appliance, BBQ, Machinery and equipment, automation instruments, electric curtain, stage lighting, counter, faucet, safe, wet towel dispenser, vending machines, automatic monitoring and other modern art..
SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Milkshake Machine Drink Mixer Stainless Steel Milkshake Maker with 800ML Cup for Home and Commercial Use
1.All Stainless Steel: This milkshake machine is all stainless steel design, which is more durable and more stable when working. Pure copper motor, sturdy motor shell to protect the motor from damage.
2. Two Gears Can Be Adjusted: the slow gear is used to stir liquid beverages such as milk tea, fruit tea, instant coffee, cocktails, and the fast gear is used to stir milkshakes, milk foam and other drinks with higher viscosity.
3. Wide Range Of Uses: not only can be used for making milkshake and stirring drinks at home. The 180W high power is more suitable for commercial use and can improve work efficiency.
4.High Efficiency：Pure copper motor, high power. The power is 180W and the speed is 18000rpm, which can improve work efficiency.
5. Quality Assurance：We are factory so not only cost-effective, but also quality assurance. There is a professional after-sales team that provide technical support throughout the day.
Features: Chassis: Fiber Composite Tub .08" (2mm) Thick, Gray in Color. Drive: Rear Wheel, Motor 550 Size Traxxas Titan 12 Turn, Fan Cooled. Radio: Traxxas TQ Two Channel 2.4GHz with Steering/Throttle Trim/Reverse, Throttle Neutral Adjust and High Torque Waterproof Steering Servo, Water Tight Receiver Box with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.
HYYKJ Outboard Motor Boat Engine 6 HP 2 Stroke 102CC Outboard Motor Marine Inflatable Fishing Boat Engine with CDI Water Air Cooling System 16'' Shaft (6HP 2 Stroke 102CC 16'' Shaft)
6HP 2 STROKE OUTBOARD MOTOR】Water Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation for reverse without gear shifting. Convenient Use and Easy Operation, Travel Safer, More Reliable, More Corrosion Resistant, More Beautiful, More Durable, More Energy Efficient, More Environmentally Friendly..
Outboard Motor, 4 Stroke 4HP 52CC Heavy Duty Outboard Fishing Boat Motor Engine with Air Cooling CDI System for Inflatable Boat Kayak Canoe Sailboat
【4 Stroke 4HP Outboard Motor】- 4 Stroke 4HP Outboard Motor, superior engine air cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, superior performance, environmental protection and durable..
【Features】- Start-In-Gear protection/clutch feature prohibits prop rotation while idling.
Features 360 degree steering rotation for reverse without gear shifting.
Easy pull off engine cover with push button latch for instant motor access. Compact structure, heavy duty and easy to carry, anti-corrosive construction, forward and neutral design..
【Note】- Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair it. To will avoid cylinder scoring, please NOTE the fellow: 1, Start the motor on bank.
2, Use the motor when it stop coming out of water, even if you want test the motor, it should be done in the river! When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked..
【Warm Tips】- 1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a no....
Durable 8.5 Amp motor with hardened steel gears – built to exacting specifications for extended tool longevity.
Automatic clutch – reduces stress load on motor and gearing.
Dual speed/torque gearbox – allows the user to set the drilling speed to match the application. Use 1st gear for high torque and 2nd gear for max drilling speed.
Ergonomic two finger trigger – features full range speed control and molded soft grip design.
Heavy duty keyed chuck – all metal design for positive bit retention and added durability.
C.S. Unitec EBM 352/3 PSA – 14 in. Capacity Concrete Core Drilling Rig with Anchor Stand – Wet Diamond Core Drill – 3-Speed for Concrete, Brick, Block, Asphalt, and Stone – Made in Germany – 110V
Heavy-duty, light-weight core drill rig with anchor stand – 14 in. diameter hole capacity – MADE IN GERMANY.
Powerful 20 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
3 speed gear box (230/500/1030 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
Only 77 lbs. (Rig & Motor) – Universal Tool Holder / Motor Slide Mount Allows for Easy Separate Mounting of Core Drill Anchor Stand from Drill Motor to Reduce User Fatique and Improve Hole Alignment (Motor Weight = 27.5lbs).
Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
