Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Cmple 3-Way Splitter 2050MHz F-Type 2.05Ghz 3 Way Coaxial Cable Splitter (RG6 Splitter, Coaxial Splitter, TV Splitter, C
HEAVY DUTY 3-WAY SPLITTER - Split a single cable or satellite signal to view and display on three separate TVs. This Coax Splitter is designed for use with amplifiers, amplified Antennas, HDTV and more..
FREQUENCY RANGE: 5-2050Mhz (2GHZ) - also referred to as coaxial splitter, coax splitter, coax cable splitter, RG6 splitter, RG6 cable splitter, F type splitter, cable TV splitter, TV signal splitter, RF splitter, F pin splitter, coaxial video splitter, and coaxial digital splitter.
COMPATIBILITY with all digital ready RF signals - Allows 3 units to be operated from one source. With grounding block and screw mount. High return loss and isolation for better performance on TV and satellite signal.
NICKEL PLATED DESIGN: Ensures a corrosion free connection and increases durability for optimal connectivity. Lower digital noise and higher signal quality.
PACKAGE INCLUDE: 1 x Nickel Plated 3-Way Coaxial Splitter for TV and Satellite.
UHF 5 Way Active Antenna Power Distribution System for shure Sennheiser Wireless Microphone Compatible Shure Antenna Paddle
UHF 450-970MHZ Antenna splitter for Wireless Microphone System and shure Antenna Paddle.
The product is a UHF antenna distribution system that can expand the signals of the wireless microphone system by splitting one pair of the antennas to wireless receiver.It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs.And can supply the power port to the UHF wireless system..
Antenna distribution system is used for large UHF wireless system,four wireless receivers can use two same antennas for every unit.Cascade port can receive the 5th receiver or the 2nd antenna distribution system..
Antenna Distribution System Compatible with Sennheiser Shure AKG UHF Wireless Microphone,Your wireless microphone frequency range must be between 450-970MHz.
Two 50ΩBNC antenna cascade port can extra connect one antenna distribution system or the fifth wireless receiver.The large wireless system can work by 1 pair antenna..
Note: This antenna splitter need to be used with antenna paddle,antenna amplifier using Method，You can see the connection picture below, If you don't have antenna paddle, you can buy it in this store.
onelinkmore RF Coaxial FPV Connector Kit SMA Adapter Type Set SMA Connector Kit SMA to SMA UHF to SMA SMA to BNC SMA to F Adapter Male to Female Coaxial Male to Female Coax Adapters Converter…
Adapter type: FPV Connector Kit SMA Adapter Type Set | Style: Straight | Material: Gold-Plated/ Nickel-Plated | Temperature: -55~+155℃ | Impedance:....
Set Includes 20 Type SMA Adapters, Allowing You to Connect the Following Antenna Types to Your Radio: BNC-connector, F-connector, SO-239 (or 'UHF' or....
Widely used for Antennas, Broadcast, Radios, Wi-Fi, Telecom, Coaxial cable, LMR, Wireless LAN Devices, CCTV, Microwave Applications and Digital....
Application: FPV antennas WI-FI Router HT radio MMDVM unit Video VTX IP camera ham radio digital amplifier SDR.
Package Content : SMA to SMA BNC N F UHF Type Connectors Kits RF Adapter 20 Type.
MFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner
Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Goupchn N to RP-SMA Connectors Kit RF Coax Coaxial Reverse Polarity SMA Male Female to N Type Male Female Adapter Convertor for WiFi Antenna Extender Transceiver
N to RP-SMA coax connectors are made of high quality copper nickel plated which can achieve higher signal transmission and extremely low signal loss. Impedance: 50 Ohm..
Adapters are all made precisely. They will not fall off easily during use. It is easy to connect N to RP-SMA Type Device. Compatible with N type and RP-SMA connectors or extension cable..
Perfect for working with antennas, wireless LAN devices, RF coaxial connector, RF coaxial cable, Wifi, handheld radios, external antenna, broadcast, telecom, CCTV, LMR, microwave applications and digital communication system..
Come with 4PCS rp-sma to n adapters. You can purchase the most comprehensive products with the least cost..
Warranty: Hope you can be satisfied with our adapters. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us..
