From large recording facilities to small project studios, engineers and artists trust Mogami GOLD STUDIO XLR Microphone Cables for professional results. Engineered to provide an enhanced dynamic range with a pin-drop quiet recording environment, Mogami GOLD STUDIO XLR Microphone Cables help to cure many of the problems encountered in a typical project or home studio..
Mogami GOLD STUDIO XLR Mic Cables are wired with Mogami Neglex Quad High Definition Microphone Cable, a balanced 4-conductor cable with amazingly superior clarity and the highest cancellation of noise and RF interference. Mogami’s quad cable design is renowned for vastly improving the rejection of noise to the tune of a 95% quieter background as compared to even the best 2-conductor microphone cable..
Use Mogami GOLD STUDIO XLR Cables for pro audio sound with nearly any device equipped with an industry-standard XLR 3-pin input or output. Common uses include to and from mixers, preamps, amplifiers, audio interfaces, loudspeakers, powered speakers, studio monitors, and more. Also excellent for use with amplifier, percussion, and vocalist mics as well as vocal effects, processors, and loopers..
This Mogami GOLD STUDIO-25 XLR Microphone Cable is a 25 foot length. The Mogami GOLD STUDIO ....
Fosmon 2X Replacement Dongle USB Breakaway Cables for Xbox 360 Wired Controllers - Dark Gray (2 Pack)
★【PRODUCT SPECIFICATION】:Compatible with Microsoft Xbox 360. Color: Gray. Cord length: 9 inch.
★【PERFECT DESIGN】:Connect your xBox controller cord to your system using this innovatively designed USB cable. Ferrite bead protects against RF and EM interference. Easy to connect and disconnect.
★ 【EASY TO USE】: Protect your Microsoft Xbox 360 from trip and smash incidents when using wired controllers, breakaway cables keep your console safe when controller cables are suddenly pulled.
★【SIMPLE AND PORTABLE】:Works with any PC game that supports joystick or game pad controls..
★【After Sales Support】:Our product 100% extremely strictly before selling, You can give it as a gift to your family, friends, classmates and anyone, especially your children.If you have any issues for this product, please contact us by Amazon message, we will provide you satisfied solution at first time..
DISINO 1/4 Inch TRS to XLR Male Balanced Signal Interconnect Cable Quarter inch to XLR Patch Cable - 3.3 Feet
This Balanced XLR Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..
EBXYA XLR Cable 50 Ft 2 Pack, Balanced DMX Cable, 3 Pin Male to Female Microphone Cable Mic Patch Cords Compatible with Speakers, Mixer, Stage Lighting
【Balanced Shielded Cables】- XLR microphone cable with amazingly superior clarity and the highest cancellation of noise and RF interference. EBXYA’s 3-conductor cable design is renowned for vastly improving the rejection of noise to the tune of a 95% quieter background as compared to even the best 2-conductor microphone cable. Assure the transportation of both data and audio signal in a smooth way..
【 SUPPORT DATA & AUDIO SIGNAL TRANSPORTATION 】-Meet your needs for DMX. The shielding on a DMX 512 cable is generally better because it's transported data, as opposed to microphone cables, which are just transporting audio signals. 3-conductor dmx xlr cable assure the transportation of both data and audio signal in a smooth way. Not cause problems such as strobing, flickering or loss of signal..
【HIGH QUALITY】- PE jacket and Strong indestructible metal connectors treats cable in a more carefree manner, avoid any ends broken. Good internal soldering connections improve the stability of signal transmission. Heavy duty metal connectors with a strong strain relief makes the connection solid and help easy plugging and unplugging..
Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black
Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
FosPower 6 Feet 24K Gold Plated Toslink to Mini Toslink Digital Optical S/PDIF Audio Cable with Metal Connectors & Strain-Relief PVC Jacket
[OPTICAL MINI TOSLINK TO TOSLINK CABLE] Mini 3.5mm Toslink/optical cables will NOT convert digital audio signals (optical/Toslink) into analog signals....
[COMPATIBLE DEVICES] The optical 3.5mm connector mini TOSLINK cables are made for specific devices such as iMacs, TVs and Notebooks that have a built....
[PREMIUM FIBER CORE AND METAL CONNECTORS] Low-loss, low-jitter, maximum signal transfer, precision polished fiber core eliminates RF, EM, and ground....
[24K GOLD-PLATED FERRULES & STRAIN-RELIEF PVC JACKET] Resist corrosion, reduce tarnish, and provide maximum protection for the fiber tip. Quality PVC....
[LIMITED LIFETIME WARRANTY] Includes a Limited Lifetime Warranty.
TISINO XLR Female to 1/4 Inch (6.35mm) TRS Jack Lead Balanced Signal Interconnect Cable XLR to Quarter inch Patch Cable - 15 Feet
This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..
TISINO XLR Female to 1/4 Inch (6.35mm) TRS Jack Lead Balanced Signal Interconnect Cable XLR to Quarter inch Patch Cable - 3.3 Feet
This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
The XLR connector is a high quality metal shielded type with positive locking into the microphone.
The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..
