Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython
The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..
6.5 Inch Dual Marine Powered Speakers - Waterproof and Bluetooth Compatible Amplified Speaker with Wireless Streaming and 600 Watt Power - 1 Pair - PLMRF65MW (White)
IP-X4 MARINE GRADE: This pair of marine speakers are completely waterproof for water base automobile and off-road vehicle use. They have a waterproof rating of IP-X4 to withstand heavy water splashes and other outdoor conditions.
RF WIRELESS STREAMING: Built with RF or radio frequency wireless streaming ability for hassle-free wireless streaming connection. The RF audio module supports additional speaker connectivity at a range of 100ft+.
4.2 BLUETOOTH COMPATIBILITY: Works with smartphone, tablet, laptop and computer with its 4.2 bluetooth compatibility. This 2-way speaker can stream music wirelessly from the aforementioned devices at a range of 30ft+.
6.5 COAXIAL SPEAKERS: This comes in 1 pair of white 6.5 inch coaxial speakers, 1 is passive and the other is active. Each has a total diameter of 6.9”, cut-out diameter of 6.75”, total depth of 3.97’’ and mounting depth of 3.1’’.
600 WATTS POWER: The dual audio speakers have a full range stereo sound reproduction for a complete speaker system. The power output is 300 Watt RMS up to 600 Watt peak. It has a frequency response of 85Hz-20kHz and a magnet structure of 20 oz.
KEYESTUDIO Mini ESP32 Development Board with ESP-WROOM-32 Microcontroller Dual-Mode WiFi + Bluetooth Integrates Antenna, RF,AMP, Filter AP STA for Arduino
The ESP-WROOM-32 module is an industry leading integrated WiFi + BLE solution with less than 10 external components..
It integrates antenna switch, RF balun, power amplifiers, low noise amplifiers, filters and power management modules..
It also integrates with TSMC's low-power 40nm technology, so that power performance and RF performance are safe and reliable, easy to expand to a variety of applications..
The board has brought out most I/O ports to pin headers of 2.54mm pitch. These provide an easy way of connecting peripherals according to your own needs..
Board is fairly well built and fits nicely on breadboard..
6.5 Inch Dual Marine Speakers - Waterproof and Bluetooth Compatible 2-Way Coaxial Range Amplified Audio Stereo Sound System with Wireless RF Streaming and 600 Watt Power - 1 Pair - PLMRF65MB (Black)
IP-X4 MARINE GRADE: This pair of marine speakers are completely waterproof for water base automobile and off-road vehicle use. They have a waterproof rating of IP-X4 to withstand heavy water splashes and other outdoor conditions.
RF WIRELESS STREAMING: Built with RF or radio frequency wireless streaming ability for hassle-free wireless streaming connection. The RF audio module supports additional speaker connectivity at a range of 100ft+.
4.2 BLUETOOTH COMPATIBILITY: Works with smartphone, tablet, laptop and computer with its 4.2 bluetooth compatibility. This 2-way speaker can stream music wirelessly from the aforementioned devices at a range of 30ft+.
6.5 COAXIAL SPEAKERS: This comes in 1 pair of black 6.5 inch coaxial speakers, 1 is passive and the other is active. Each has a total diameter of 6.9”, cut-out diameter of 6.75”, total depth of 3.97’’ and mounting depth of 3.1’’.
600 WATTS POWER: The dual audio speakers have a full range stereo sound reproduction for a complete speaker system. The power output is 300 Watt RMS up to 600 Watt peak. It has a frequency response of 85Hz-20kHz and a magnet structure of 20 oz.
Insteon Garage Door Control & Status Kit, for Standard 2-Wire Button Controlled Garage Motors, 74551 - Insteon Hub Required for Smarthphone Control and Alerts
Remotely monitor and control (open and close) your garage door using any Insteon controller (sold separately).
Includes sensors that provide status on whether the garage door is open or closed.
Compatible with traditional 2-wire garage openers only - if your garage control button features a display panel, this kit is not compatible.
Can be used without an Insteon Hub (2245-222) - included Insteon I/O Linc module (2450) communicates over powerline only, which may cause issues if you are trying to remotely operate your garage from Insteon devices on a different electrical phase (circuit) or from an Insteon Mini Remote.
Recommend adding a Range Extender (2992-222) on the same phase to bridge the I/O Linc module with Insteon RF-only or Dual-band devices.
MPC (2) 4-Button 1-Way Remotes with Antenna Upgrade Kit for Fortin EVO-All & EVO-ONE - Extends Range up to 2,800 ft
...rade system for Fortin EVO-ALL or EVO-ONE "stand alone" remote start systems. Includes: (2) 4-button remotes, RFA2A antenna adapter, decoder antenna, antenna wire, and instructions..
✅ FEATURES - Start or stop your engine with the push of a dedicated button from up to 2,800 feet away. Depending on vehicle and data module coverage, functions also include lock, unlock, trunk or back hatch release, and AUX channel activation..
✅ INSTALLATION TYPE - The installation of this product will require only the plug-ins to an existing EVO-ALL or EVO-ONE module, no wiring connections are required. A person with basic knowledge of wiring car electronics should be able to install this product successfully..
✅ IMPORTANT: This is not a full remote car starter. This is an add-on remote control kit that works with Fortin “stand-alone” remote starter systems that consist of an EVO-ALL or EVO-ONE module only and do not include a separate remote start module. If you have an EVO-ALL or EVO-ONE that was NOT purchased from MPC, you will need a FlashLink Updater to make this product work. EVO-ALL or EVO-ONE standalone systems purchased from MPC have the correct settings and the updater is not needed..
✅ MPC TECHNICAL SUPPORT - MPC's USA-based professional tech su....
