Best Right hand Cutting Boring Bar

4\ BORING HEAD SET 6 PCs CARBIDE BORING BAR WITH R8 SHANK 4 INCH BORING 1'' MILL

Check Stock

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
  • Precision ground and hardened. Completely sealed for maintenance free operation.
Check Stock

Boring Head Set, Carbide Boring Bar MT2 -M10 F1-12 50mm Boring Head with 9pcs 12mm Boring Bars Milling Machine Accessories for Boring and CNC Milling Machine Tools

  • SUITABLE FOR : The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • USED FOR : This tool set is made of high quality material, good wear resistance, and durable in use.It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • PACKAGE LIST : This tool set contains 1 x drawbar thread: MT2 M10*1.5 1-1/2"-18UNF,1 x F1-12 50mm boring head with 12mm hole accept ,9 x boring carbide tips with 12mm shank,3 x keys ,1 x plastic case.
  • QUALITY ASSURANCE :100% brand new and the quality of our products is guaranteed.We supply fast and convenient return or replace service to insure purchasing without worries. If you have any questions about our products,please feel free to contact.
Check Stock

Universal J -Bar Rack Kayak Carrier Holders for Canoe Kayaks Surfboard and Ski Board Mount on Car SUV Truck Roof Top Mount Rack 2 Pair

  • Multi-function and Load Capacity: the kayak carriage can be installed on almost all of roof bar mount on the market.It can accommodate kayaks up to....
  • Keep safe: a good kayak roof rack is depend on protection and safety. Though many kayaks are durable in their own right, the damage will still happen....
  • Unique design:These J-Bar kayak carriers keep right between traditional horizontal and vertical designs. They hold the kayak at an angle which is more....
  • More Exploration:For those who like to travel with kayak, the same place will be boring after several times. So if you have the proper mode of....
  • Package: 4PCS J-Rack, can carry 2 kayaks on the roof or carry Canoe,Surf board,Ski board,Snow Board..
Check Stock

Spyderco Tenacious Lightweight Folding Utility Pocket Knife with 3.39

  • Game Changer - Being tenacious means you are persistent and cohesive. It's being tough and tireless in achieving your best performance.
  • all worthy descriptive words for a hard-use knife.
  • Superior Blade Steel - The 3.39" 8Cr13MoV stainless blade is ground-flat from the spine to cutting-edge for non-stop cutting.
  • A Secure Grip - This all-new lightweight version raises the bar even further with injection-molded fiberglass-reinforced-nylon (FRN) handle scales that reduce the knife's overall weight by almost 12 percent.
  • Easy-to-Use - The blade's shape coupled with an oversized Spyderco Round Hole and textured spine jimping allows you to open the blade and position your thumb on the spine in slip-proof confidence ready for work.
  • Pocket-Friendly - The Tenacious includes a Walker LinerLock and a black 4-way pocket clip lets the folder be set in a variety of carry and draw positions: Tip-up/tip-down left-hand/right-hand..
Check Stock

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

  • 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
  • Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
  • It is not necessary to remove tool from chuck or tool post.
  • Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
  • 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Hinge Boring Bit Hole Cutter Drill Bit, High-Grade Carbide Tipped Boring Bits for Wood, Plywood, Melamine - Cutting Diameter: 16.5 mm, Overall Length: 70 mm, Right Handed Rotation

  • High-grade tungsten carbide hinge boring bits offer Sharp-cutting, high tolerances, longevity and durability.
  • Hole cutter bits perfectly drill accurate fine circular holes in plywood, hardwood, soft wood, and other composite solid material.
  • Cylinder boring bit best suited for industrial wood processing, model making, installation of hinge, spherical door handle, drawer handle.
  • These hinge hole cutters come with a shank diameter of 10 mm, 57 mm to 70 mm in length, and 14.3 mm to 58.0 mm cutting diameters.
  • Easy to install, and easy to use! All bits can be used on manual as well as automatic multi-spindle boring machines. Order now!.
Check Stock

Worx WG304.1 15 Amp 18\ Electric Chainsaw

  • 15.0 Amp motor output delivers a more powerful cutting performance to the extended, 18-inch bar.
  • Patented auto-tension chain system prevents over-tightening.
  • stays at the right tension for hundreds of uses.
  • Low kickback bar and built-in chain brake for added safety.
  • Automatic oil lubrication and built-in oil reservoir with window level indicator.
  • Comes fully assembled right out of the box, and includes 3-year manufacturer’s warranty.
Check Stock

OSCARBIDE TCMT21.51 Carbide Turning Inserts TCMT110204 Carbide Inserts 10 Pieces,TCMT Insert Tin Coated CNC Lathe Carbide Cutters Inserts for Lathe Turning Tool Holder Boring Bar

  • Size: TCMT 21.51(TCMT110204), 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
  • Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials,used for turning and finishing on a wide range of materials.
  • OSCARBIDE TCMT 21.51 has wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
  • Fit our 1/2”Boring Bar Set Tool Holder or 3/8" Mini Turning Tool Holder or Other Brands the same size carbide inserts, you can search the Asin: B07PLX982C or B07PYSN4JC to purchase set directly..
Check Stock