Sealproof 1-Inch Non-metallic Liquid-Tight Conduit and Connector Kit, 25 Foot Made in USA Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1" Dia
Made in USA. Use with Sealproof straight or right angle connectors.
can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
UL Listed Underwriter's Laboratories File No. E-129973.
UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Size: The outer diameter of the hose barb is 3/8"(10mm), Suitable for connecting 3/8"(10mm) inner diameter hose..
Material: Hose barb splicer mender made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
Solid Connections:The hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
1/2inch Rigid Pipe Strap Clamp, Two Hole Strap,U Bracket Tube Clip, Stainless Steel Heavy Duty Pipe Fasten Holder, 50Pcs (20mm)
This Clamps accommodates 20mm (1/2") pipe and has 2 holes to secure it in place. Suitable for holding various pipes or rods like PVC. The screw hole diameter is 4mm (0.15")..
Made of 304 stainless steel, with 0.6mm rigid thickness, the pipe clamps are highly resistant to corrosion and rust, strong, durable and sturdy..
Use in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
These u shape clamps are strong enough to hold your pipe or rod securely. Reinforced steel for extra strength..
Only need to cooperate with screws can be installed, convenient and fast, resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..
110V Dual Power Automatic Transfer Switch Dual Power Generator Changeover Switch 50HZ/60HZ (2P 63A Blue)
VERSATILE: 30-amp portable power transfer station easily keeps critical items going in case of a power loss and use for off-grid continuous use in homes, cabins, and more.
CONVENIENT: Links your generator to existing lines in your indoor breaker panel, providing power without having to move large items or unplug devices in tight spaces.
INCLUDES: Kit includes conduit, cable clamps, and power cord.
CIRCUIT LABEL: Removable cover with circuit label adds protection and convenience and finishes off the overall look of the transfer switch.
PORTABLE: System kit weighs only 12 pounds and measures 13.25 inches long, 8 inches wide, and 4.75 inches tall for easy transport from place to place.
【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK，Size：3/4inch， The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T
Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
UL Listed Underwriter's Laboratories File No. E-129973.
UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
ATPEAM Hose Clamp Pliers Set | 3Pcs Flexible Heavy Duty Hose Removal Tool Hose Pliers Automotive Hose Clamp Tool Used in Any Position | Works on 18mm-54mm Hose Clamps
Two Hook Pliers Added: Two hook designs of the hose pliers automotive to fit between various fittings and hoses. Easy to penetrate hardened coolant, oil or any other parts where hose attached . Real-time removal of radiator hoses, transmission lines, heater conduit pipes or any other rubber pipes with fitted joints..
Wide Application: The hose clamp tool allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm).
Package Included: The hose removal tool includes 1 x Hose Clamp Pliers.
This Clamps accommodates 4inch pipe and has 2 holes to secure it in place. Suitable for holding various pipes or rods like PVC. The screw hole diameter is 6.5mm (0.26")..
Made of stainless steel, with 0.6mm rigid thickness, the pipe clamps are highly resistant to corrosion and rust, strong, durable and sturdy..
Use in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
These u shape clamps are strong enough to hold your pipe or rod securely. Reinforced steel for extra strength..
Only need to cooperate with screws can be installed, convenient and fast, resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..
