STS Smoked Lens Side Marker Lamps Replacement for Cadillac STS 2005-2011 Driver Side/Passenger Side Fender Amber LED Turn Singal Lights Kits
✅Function: Compatible with 2005-2011 Cadillac STS. Upgrade your sidemarker with a new smoked lens fashion style. Elevates your muscle car's aura and even adds additional safety visibility LED features..
✅Includes: One pair driver and passenger side smoked lens fender LED side marker lamp assemblies for Cadillac STS..
✅Features: Smoke Lens, Powered by high power SMD LED diodes with amber yellow LED on the front fenders that form a perfect focal strip with a super bright lighting output.
✅Installation: Direct plug and play installation, perfectly replace factory parts, no modification needed.
this product features as a replacement and upgrade for your Cadillac front side marker light..
✅Package:2pcs smoke Lens red LED front side marker lamps, DOT/SAE approved.
Yahboom LED Strip Light Programmable WS2812 DC 5V PH2.0 RGB Full Color-Driven Compatible with Raspberry Pi Pico Arduino Microbit STM32 ESP32 5 Bit 4PCS 14 Bit 2PCS
【Full color, high brightness】 The brightness of the lamp beads of the light bar module can be controlled individually, the brightness range can be adjusted from 0-255, and different colors can be customized according to needs.
【Programmable, widely used】 Compatible with most development boards, such as: raspberry pi, arduino, Microbit, STM32, ESP32, etc. Widely used in programmable DIY robot projects, electronic experiments, LED decorative lights, full-color modules, full-color flexible light strips, indoor and outdoor LED video irregular screens..
【Cascade of 5 LEDs】The 5 LED strips provide 7.5cm cable and 20cm cable, which can be connected end to end to form a longer strip. The decoration around the DIY trolley is colorful.
【Material Soft and Hard Available】The light bar with 14 lamp beads is a flexible FPCB, which can be freely bent into the shape you want to match the installation location. The light bar of the 5 lamp beads is a rigid PCB, which can maintain a straight shape.
Clordeal 12V Power Supply 44key Wireless IR Remote Control + Control Box + 12V 5A LED Transformer for SMD 3528 5050 RGB Led Strip Lights
[44 KEY IR REMOTE CONTROL] Input voltage: 12V DC, Max output current: 12A, don't forget to remove battery plastic cover for the remote control before....
[LED REMOTE CONTROLLR BOX] Control mode: IR, Control distance: 5M (must be a certain degree to aimed at the ir receiver and without any obstacles).
[12V POWER SUPPLY] Output: 12V, 5A, Input: 100-240VAC, 50/60Hz, 1A , Power consumption: 60W.
[APPLICATIONS] Suitable for SMD 5050 RGB Strip Lights and SMD 3528 RGB Strip Lights..
[PACKAGE CONTAINS] 1 x 44 key remote control, 1 x RGB IR receiver, 1 x 12V 5A power supply.
CHINLY 3.3ft 60leds WS2812B Individually Addressable LED Strip Light 5050 RGB SMD 60 Pixels Dream Color Waterproof IP67 Black PCB 5V DC (Black PCB 3.3ft 60leds Waterproof)
Length: 3.3ft , LED SMD Qty: 60pcs RGB SMD5050 per meter , Tube-waterproof IP67 , Black PCB ,DC5V.
Dream full color Programmable LED Strip, WS2811 IC Built in 5050SMD, 256 brightness display and 24-bit color display. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want..
Work great with Arduino, ready-to-go library, FastLED library and Raspberry Pi, etc. It’s very easy to program..
It comes with 3pin JST-SM connectors and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want..
It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, Christmas or wedding party decoration, and so on..
ACER MCERC-200 RF Remote Control & TOSHIBA USB Receiver
【RF vs IR】RF Radio frequency remote can work through wall or other obstacle with range of about 50 feet, but IR remote can not work through any obstacle..
【44 Key Remote】Easy for you to choose static colors, adjust brightness, turn On/Off, control modes: Flash, Strobe, Fade, RGB Smooth-change, Static..
【Timer Function】If you press button 1H,2H,3H, the light will automatically turn off in 1H,2 H,3H..
【4-pin Connector】Compatible with SMD 5050, SMD 3528, SMD 2835 RGB LED Strip lights with 4-pin connector..
【2-Ports Connector】(Package comes with 1pcs x 2-Ports remote controller) You can connect 1 or 2 rolls of led strips as you like. One remote can control 2 rolls of strips at the same time..
Kasco VFX Series Aerating Pond Fountain - 2 Horse Power 240V Single Phase with 150 ft Electric Power Cord | Pond Aerator Pump for Ponds & Lakes | Efficient Pond Aeration Systems
☀【Excellent design】Sea water is also applicable!Heavy-duty Materials and Excellent design-The main body of the spillway is welded together by 316 stainless steel, which is more stable for long-term use. The open design not only makes the water flow more smoothly but also makes it easier to clean..
☀【Ideal Choice】Pondo 47" LED waterfall spillway makes your patio and swimming pool elegant, fashionable and beautiful. The color change of LED lights and the gentle sound of water running make your patio more special at night. It comes with one spillway, IP68 led strip, remote, IP67 adaptor and supply cord..
☀【Upgraded Water】resistant LED strip and adaptor-The waterproof function of IP67/68 can avoid damage caused by water. The upgraded SMD lamp beads are brighter than ordinary ones..
☀【Easy to install and operate】By remote, you will get 7 color to change. The attached instruction manual makes it easy to install. If you have any installation questions, please contact us in time..
☀【Suggestions on use】 In order to avoid the scale, we recommend that you use the filter to keep the water clean. Please use submersible pump 110V or circulation pump 24/48 V. Inner diameter of connector: 1.2".
Set 7-Color 48-SMD Scanning LED 22" Knight Rider Strip Light Turn Signal Car Truck Interior Lighting Decoration Compatible with Chevrolet Ford Toyota GMC Dodge Jeep Honda Nissan Lexus
Manufacturer Warranty is Valid for Purchasing from Astra Depot ONLY.
1 piece 22 inches long super bright 48 RGB type SMD LED strip.
Package includes: Package Includes: 1 piece 22 inches Long Super Bright 48 SMD RGB type LED Strip.
1 Piece Wireless Remote Control (60 ft Range). *Note: color of the remote control is randomly printed.
Nexillumi 32.8ft Tunable White LED Strip Lights 600 LEDs, 3000K-6000K Dimmable LED Tape Light with Remote, LED Ribbon for Bedroom Mirror Kitchen Bar Cabinet Indoor Home Daylight Warm White
【Cool White & Warm White LED Lights Integrated on One Strip】: Daylight White(Cool White) and Warm White Hybrid LED Strip Lights, and color temperature can be fine-tuned between 3000K(Warm White) and 6000K(Cool/Daylight White) with our remote..
【Durable Strips and Upgraded LED Units for Brighter and Longer Life Span】: ① Strips made of durable double layer copper board(Non-Waterproof), ②600 SMD 2835 LED Units with enhanced brightness and lights are dimmable and color-changeable with remote, Life span extended to 18 months warranty..
【No-Brainer Installation】: ①Very High Bond Adhesive on the Back, sticks and stays no worry about falling off. ② Strip can be cut among every 6 LED units to customize the length you need. (We do not provide the connectors, You can search 8mm 3-pin connectors on Amazon if you need to customize the strip) ③12V DC low voltage powered, energy-efficient, touchable and safe for children and pets..
【Versatile Applications】① Daylight White/Cool White often used as Kitchen lights, TV backlights, vanity lights around mirrors, sometimes for reading in dorms or any places you wa....
Fntek 10Packs 4-Pin RGB LED Light Strip Connectors 10mm Unwired Gapless Solderless LED Tape Light Adapter Terminal Extension Connectors for SMD 5050 Multicolor LED Strip (10 Pcs 4PIN RGB Connector)
Application: Suitable for all 10mm wide (0.39 in) 4-pin SMD 5050 RGB flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. Ideal for extending the LED strip and straight connection.
Easy to Use: Quick shunt connection and solderless snap down. Open the wire clamp. With a little effort, it will open quickly. Insert the 10mm LED strip into the clips under the two contact feet, making sure that the”+” and “-” correctly.
Fireproof Material: Fntek LED connectors are made from PBT material, which is heat resistant. 72W max wattage, which can be used for low wattage and high wattage light strips.
Note: Make sure you put the led strip under the pins and not on top. Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
Package: 10X 4 pin connectors for 10mm SMD5050 LED strip lights. If you have any questions, inquiries or need assistance, please feel free to contact us.
Smoked Lens Corvette C7 LED Front Rear Side Marker Lamps for 2014 2015 2016 2017 2018 2019 Chevrolet Corvette Grand Sport Stingray Z06 ZR1 Red Amber LED Turn Singal Light Kits Sidemarker Lamps
✅Function: Compatible with 2014-2019 Chevrolet Corvette C7 Grand Sport, Stingray, Z06, ZR1. Upgrade your Chevrolet Corvette C7 STINGRAY with a new fashion style smoke lens front and rear led side marker light. Elevates your muscle car's aura and even adds additional safety visibility features.
✅Includes: 2/pcs driver side marker light kits and 2/pcs passenger side marker light kits. Amber front LED side marker lamp assemblies & Rear red LED side marker lamp assemblies for c7 corvette..
✅Features: Smoke Lens C7 Corvette side marker lamps replacement., Powered by high power SMD LED diodes with amber LED on the front fenders and red LED on the rear fenders that form a perfect focal strip with a super bright lighting output.
✅Installation: Direct plug and play installation, perfectly replace factory parts, no modification needed.
this product features as a replacement and upgrade for your Chevrolet front and rear side marker light..
✅Package: 2pcs smoke lens Amber front led side marker lamps, 2pcs smoke lens Red rear led side marker lamps, DOT/SAE approved.
