HIDE YOUR PIERCINGS 0g double flare tunnels - These ear gauges 0 make your ear piercings virtually invisible and very good for light and fair skin....
EASY TO WEAR, COMFY AND HEALING 0g silicone plugs - These size zero ear gauges are comfy enough to wear all the time even when you are sleeping and....
EAR STRETCHING 0g double flare silicone - These cool silicone ear gauges size 0 are both soft but solid. This means that the earskins hider saddle....
CONCAVE ON THE BACK gages size 0g silicone - The front of cute gauges earrings 0 g plug is solid but the back is concave for EASY TO PUT IN and take....
WHAT WILL BE DELIVERED? - 2 Pieces of gauge earrings size 0. These flesh colored plugs 0g gauge earrings 0g are made from the finest silicone. The....
Starrett 156M Screw Pitch Gauge – Thread Measuring Metric Gage Tool with Locking Device, 0.25-2.5 Threads Per Millimeter, 28 Leaves
SCREW GAUGE MEASUREMENT TOOL: The Starrett Screw Pitch Gauge is among the most valuable tools in any mechanic's toolbox. It’s used to quickly determine the pitch of various sized screw threads.
28 LEAVES: It features 28 folding leaves that are housed in a durable steel case Each leaf is clearly marked for measuring and matching up to different sized thread pitches.
LOCKING POSITIONS: There’s a positive stop locking device at both ends, so helicopter leaves can be securely locked in position for ease of use.
GAGES INTERNAL and EXTERNAL THREADS: This model screw pitch gauge is specially designed with narrow leaves that allow you to check both the internal and external threads of nuts and bolts.
METRIC MEASUREMENT RANGE: The Starrett 156M Screw Pitch Gauge offers a metric measuring range of 0.25 – 2.50mm TPI..
【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
350 LEGEND: Use to check headspace of 350 Legend..
RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
GO: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo..
PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference between the length of a standard cartridge, as represented by a gage, and the gun’s actual chamber length , when the head of the cartridge is flush against the bolt face..
Starrett End Measuring Rod with Insulated Handle and Spherical Ends for Comparing Gages and Measuring Parallel Surfaces - 1/4 Diameter 2 Length - 234A-2
Measure with Precision - The Starrett End Measuring Rods or Standards are for checking and setting micrometers of 2" capacity or larger and are also used on machine tools for comparing gages and checking precision measuring tools..
Firm Hold - The rubber handle provides insulation and a comfortable grip, making it easy to use for extended periods of time. Plus, the insulated handle helps minimize expansion by heat when held in the hand..
Multipurpose - These standards are the ones used for all micrometers furnished with standards. They are useful for measuring parallel surfaces and many other types of work..
Durable Construction - Made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. It is also available in larger sizes, so you can find the perfect fit for your needs..
The Standard for Excellence - Manufacturing quality tools that provide consistent and reliable performance since 1880, Starrett's commitment has earned them a reputation as one of the most trusted names in the industry..
Starrett 120 Series Dial Slide Calipers for Accurate Measurement with Fitted Plastic Case - White Face, 0-6 Range, 0.001 Graduations - 120A-6
Get The Job Done Right - This dial has a positive split-gear anti-backlash control, knife-edge contacts for both inside and outside measurements, one hand use with the thumb-operated, fine adjustment roll, direct reading, reliable and accurate graduations.
Made From Robust Materials - This Dial indicator is made of hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod.
has lock screw for dial bezel and lock screw for holding sliding jaw in position..
Wide Range Of Selection - It offers a variety of each of the major classes.
mechanical dial, electronic display, lever style test and back plunger. Each type has its own unique strengths..
Made For You - It offers everything you need, including a broad line of each indicator type, an extensive range of accessories to configure and position the gage, and as needed, an indicator-based, custom engineered solution..
The Finest Quality Available - Starrett indicators and gages have been the go-to choice for precision measurement for over a century. Our tools are carefully crafted to provide the most accurate readings possible..
Mophead EZ Pickins Pick Punch Customizable Guitar Pick Making Kit with Pick Puncher, 20 Punch Cards, Shaping File and Pick Holder
CUSTOMIZE YOUR PICKS - With Mophead's EZ Pickins pick punch, it's easier than ever to customize the designs of your guitar or bass picks. Simply slide a card into the punch and press the handle to create innovative and personalized designs..
ENDLESS OPTIONS - With the 20 included punch cards and many more color options available from Mophead, you're only limited to your imagination. Virtually anything can be turned into a pick..
SHAPE YOUR PICKS TO PERFECTION - With Mophead's shaping file, your can smooth and contour your picks to the perfect angle. Shave them down on one edge to create an ergonomic grip or adjust the picking side to hone and stylize your sound..
KEEP YOUR PICKS HANDY - With Mophead's spring loaded pick holder, you're ready to carry your new collection of customized picks anywhere you go. A 3M adhesive strip included with the order allows you to attach your holder to any surface..
MULTIPLE PICK GAGES- Included with the EZ Pickins pick punch is a variety of card gauges so you can punch thin, medium and heavy picks. This allows you to create picks that are perfect your specific applications..
243 WIN: Use to check headspace of 243 Win., 260 Rem., 7mm-08, 308 Win., 338 Fed, & 358 Win..
RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace.
GO: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo..
PRECISION MACHINED: Manufactured from top-quality, hardened ....
QISF Multi-Purpose 2 Pack Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth
【Function】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
【Material】--Stainless steel and chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
/ 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
【Package】-- 1 x 58Pcs Blade Metric & America SAE Type & British Whitworth.
