Plug & Play: The Kisdoo network selector is not powered by adapter or driver. Just plug and play the device..
RJ45/RJ11 Port: RJ45 8P8C Network/Telephone 2 way AB Sharing Switch Box. This 8P8C Sharing Switch Box will switch between 2 RJ45 (Network / Phone)....
A/B Switch: The box can be used with Network Devices or 8 wire phone applications. Use as 1 in 2 out or 2 in 1 out..
Metal Case: The metal case is superior than the plastic one. It's more durable and stable while transmission..
Warranty & Caution: The selector is a switch to choose the networking device more faster and convenient , who CAN NOT support two devices work at the....
RJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W
8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
CHZHLM Rj45 Crimp Tool Kit Pass Through Crimping Tool Crimper Cutter for Cat6 Cat5 Cat5e with 50PCS Connectors Mini Wire Stripper Cable Tester and Plier
☆Rj45 Pass Through Crimper - for 8P RJ45 Cat6a Cat6 Cat5e Cat5 pass through connectors(including the shield the connectors)and suitable for 26AWG-23AWG cable.
☆Heat Treat Blade - The blade is made by high quality steel with special heat-treated process, it is very durable..
☆Replacement Blades - The crimping blades for other crimper is installed on the surface of crimping port with a small screw. it is every easy to run off and be loose during the process of crimping the connectors and replacing the blades. However, our crimping blade is inserted in a black socket then installing it into the crimping port by a nail and a screw. Making sure the blade will not run off and loose and Increasing the success rate of crimping the connectors highly..
☆All In One Crimper - Cutting, Stripping and Crimping are included in one tool that can deal with all the installing work. Design for Pass through 8 Position rj45 connector plugs.
☆Mini Design - This RJ45 Crimp tool is about 2/3 size of the traditional crimpers. The compact design handles easily for an ergonomic grip and comfortable compressing action. Handle grips will not let you to be tired and prevent your hand be slipped during stripping, crimping and cutting..
Network Cable Tester, RJ11 RJ45 Line Finder, Wire Tracker Multifunction with Probe, Ethernet LAN Network Cable Maintenance Collation, Telephone Line Test, Earphone
▲RJ45 RJ11 Wire Tracking : RJ11 and RJ45 wires can be found through transmitter. It is simple and fast to find the line without stripping the outer skin of the line.
▲Wire Sequence Calibration : It can detect the wire sequence, open circuit, short circuit, wrong pair and reverse connection of the network line.
▲Detect Line Level and Positive and Negative Polarity : Only use the transmitter to detect the Battery positive and negative and Level determination.
▲Telephone Line Status Detection : It can detect the status of the working telephone line (idle, ringing, off-hook) and discriminate TIP or RING line.
▲Wire Connectivity Detection : Only transmitter can be used to detect the connection status of the line.
Hiija RJ45 Crimp Tool Pass Through Cat5 Cat5e Cat6 Crimping Tool for RJ45/RJ12 Regular and End-Pass-Through Connectors with 50PCS CAT5 CAT5e Connectors, 50PCS Covers and Mini Wire Stripper
Combo RJ45 Crimp Tool Kit including 50PCS CAT5 CAT5e End-Pass-Through Ethernet Connector, 50PCS Cat6 Cat6A Cat7 RJ45 Plug Connector Cover and a Network Wire Stripper.
Multi-function EZ Crimp Tool: Lets you cut, strip and crimp (CAT6, CAT5/5e) and telephone cables, Compatible with all RJ45 CAT6 connectors (including shielded), RJ45 CAT5E connectors, and RJ11/12 connectors (excluding AMP).
RJ45 Crimping Tool: Made of professional-grade heavy-duty steel so it delivers exceptional torque without bending, die head assembly provides 360 degrees of connector support for terminating modular plugs on stranded or solid cable.
Replaceable Blade - Maintains razor sharpness, textured handle grips reduce hand fatigue and prevent slipping during cutting, stripping and crimping.
Our Worry-Free 18-Month Warranty and Toll-Free Tech Support, and friendly customer service. If you are not satisfied with your purchase within 18-month, return it for a full refund of your purchase price.
BOOGIIO Wire Tester RJ45 RJ11 Cable Tracker Line Finder Multifunction Wire Tracker Ethernet LAN Network Cat5 Cat6 with Earphone for Cable Collation, Network Maintenance Collation, Telephone Line Test
▲WIRE TRACING MULTIFUNCTION - Fast to locate the breakpoint without wire's cover damage, Find wire on all types of connected operating Ethernet switch /Router/PC terminal. Perfect for tracking RJ11, RJ45, cables or other metal wire (via adapter);And also with the Battery(10V-110V) positive and negative measurements function..
▲WIRE TRACKER - The Line Finder can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip.
In this situation, the wires must be in power-off status, otherwise the units will be damaged.
It is recommended to stripe down some of the wires when connecting through the clip.
Emitter works properly if the "SCAN" indicator is on.
▲NETWORK & TELEPHONE LINE TEST - The Line Finder testes physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection.
Use the emitter to test the status of working of telephone lines (such as judging TIP or RING line), test the line level, positive and negative polarity detection.
Adjust the volume of receiver by pressing the volume rotary knob..
▲EARPHONES DESIGN - With a pair of Earphone, you can just connect the earphone to the head....
RJ45 Ethernet Extension Cable Cat 5E/5 Cat 6 Male to Female Shielded Screw Panel Mount Internet LAN Network Lead 1.5M
These RJ45 shielded ethernet extension cable codes are excellent for extending your LAN connection to your HDTV, Blu Ray Player, Home Theater, XBox 360, PS3, Switch boxes, Routers, Network printers, Network Attached Storage (NAS) Devices, VoIP Phones, and PoE Devices etc.
RJ45 shielded male plug to RJ45 shielded Female Jack, shielded with molded connectors, M/F high speed cables to distribute data, voice, surf the net, stream video, music, ect.
The male to female network leads support high bandwidth of up to 550 MHz guarantees. compatible with Cat 5E Cat 5 Cat 6 network cable, transmission bandwidth up to 100Mhz with Cat 5, up to 250Mhz with Cat 6.
Type: RJ45 male to RJ45 female anel mount standard FTP Cat 6, with 8P RJ45 male port fits for RJ45 jack configuration.
SHONCO 2 Pack 6M 20ft Phone Telephone Extension Cord Cable Line Wire with Standard RJ11 6P4C Plugs for Landline Telephone- White
You can use from wall phone line to a telephone. Male RJ11 to male RJ11 Telephone Cables are used for standard RJ11 phones.For use with telephones, fax machines, modems, answering machines, etc.Not work as a Ethernet Cable (Example: internet box to xbox)..
It is good to long-distance communication for your desk phone or office phone .Extended length coiled cord is provided Extra Length for working in the office or at home..
Phone line length of 20 ft, 6p4c connector. Not applies to VOIP phone and Cat 5 is Category 5 UTP cable, typically used for Ethernet with a 8P8C (RJ45) plug. This is standard telephone cord with RJ-11 for use with landline telephones, fax machines, dial-up modems, etc..
Universally compatible Telephone Handset Extension Cord Cable with all telephones manufacturers.You can use them as replacements for those IP phones..
☆Professional 3 IN 1 RJ45 Crimper: Stripping Cutting and crimping ALL IN ONE for Network Cable and 6P(Rj11/RJ12-Connectors),8P(RJ45-Cat5/5e and Cat6/6a connectors).
☆Focusing on Quality:Material - High Carbon Steel with heat treatment process. The “Teeth” for crimping the connectors is made by electrical discharge wire process,Increasing the success rate of making the network cable connectors highly..
☆Safe: Ratchet Satety-release and the blade-guard will reduce the risk of injury during the cutting, stripping and crimping..
☆Comfortable: Fast, reliable crimping tool with steel body construction and ergonomic comfort grips will be helpful for professional workers to make bunch of connectors and will not be tired..
☆Packaging:1 x RJ45 Crimp Tool ,50PCS x RJ45 Cat5e Connectors(Maximum Diameter 1.0mm,Suggest for 26AWG cable) 50PCS x Covers,50pcs x Nylon Cable ties(4Inch),1 x Ethernet Cable Tester(Do not support POE cable testing. Battery not included,requiring 1x piece 9V 6F22 battery), 1 x Black Wire Stripper,1 x Yellow wire stripper,1 x Cross Screwdriver,1 x Straight screwdriver.
☆Service:Any quality problems within 18 months, sending all your money back..