Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs..
The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used..
To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head..
The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8....
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Angle Finder Aluminum Miter Saw Protractor, Rust Proof Angle Finder Featuring Precision Laser Engraved Scales Miter Angle Finder for Carpenters, Plumbers and All Building Trades
Angles are no longer a guess: Easily measure the inside-outside angles. Fit for woodworking, carpentry trimming, or DIY jobs. Fast and easy-to-find miter cuts. It will save you so much time and a LOT of money on wasted wood. Quick and easy to use, with no need for complex or expensive tools. just hold the protractor up to the angle, read the degree measurement for the miter cut, set your miter saw at that angle, and cut your piece. It reads single cuts as well as miter cuts..
Fast and easy-to-find miter cuts: Provides you the exact angle you need, either inside or outside corners. Its two plates can directly transfer your work angle to the miter saw for an accurate miter cut and single cut, saving you time and effort. Very easy to use and read, get an edge or corner miter perfect. The EVERSEE protractor couldn't be simpler. Compact and adjustable design makes it easy to carry and convenient to use. MAKE YOUR LIFE SO MUCH EASIER when it comes to making accurate cuts..
Durable engineered aluminum alloy & rust-proof: Durable construction ensures long-lasting performance. It is designed to be compact and lightweight. It eliminates calculations, reduces errors, ....
FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)
This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing..
This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use..
Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc..
Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues..
These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts..
Saker Miter Saw Protractor|7-Inch Aluminum Protractor Angle Finder Featuring Precision Laser-Inside & Outside Miter Angle Finder for Carpenters, Plumbers and All Building Trades (Black)
⭕【ACCURATE】:Features easy-to-read precision laser engraved scales, protractor allows direct angle reading to the miter saw. Perfect for crown molding, trim work, and a variety of other carpentry applications..
⭕【“O” BODY DESIGN】:Saker Miter Saw Protractor is of “O” shape design during operation and ensures smooth & precise read on inside/outside corners, Crafted from precision CNC-machined aluminum alloy..
⭕【EASY TO CARRY 】:Saker Miter Saw Protractor is made of lightweight aluminum alloy, which has great corrosion and wear resistance, extending the lifespan. Also, its small size and lightweight material makes it easy to carry..
⭕【WIDE APPLICATION 】: Whether you are a professional or not, Saker Miter Saw Protractor is excellent for you. It is suitable for crown molding, miter cuts, carpentry, plumbing, metalworking and more..
⭕【Service】We Are Confident In the Quality of the Product. In the Process of Daily Use, If the Product Has Quality Problems or Have any Questions About the Product, Please Feel Free To Contact Us, We Are Always There..