Range Hood Insert 30 inch,Stainless Steel Kitchen Vent Hood 600CFM,Built-in Kitchen Stove Hood w/Front Button Controls and Front LED Lights,Baffle Filters,Ducted/ductless Convertible Duct
【600 CFM Powerful Suction But Quiet】Maximum 600 CFM great suction comes from powerful motor in range hood insert, able to work in good condition for several years. Maximum noise of this insert stove vent is only 65dB, just like walking in park..
【Dishwasher Safe Stainless Steel Filters】Both baffle filters of insert range hood 30 inch were made from #430 stainless steel, with good corrosion resistance. Due to its good corrosion resistance, baffle filters can be auto-cleaned by dishwasher safely..
【Duct/Ductless Convertible】Through simple installation of charcoal filters, ducted range hoods can turn into ductless range hoods easily. Charcoal filters (sold separately: CFZMG13) can be purchased in our shop. It aslo can be ducted install venting outside,ducted 6 inch round vent on the top..
【Easy Control Button Panel】Classic mechanical push-button on vent hood board always do a good job no matter it is above hot temp stove or control by wet hands. You can trust it to work no matter what time to use it..
【Two Bright Cooking Lights】With bright cooking lights on the bot....
RV Roof Vent Lid Cover for Jensen Metal Roof Vents Suitable for 13*13 Inch Motorhome Roof Vent Cover Camper Trailer by Swess
✅►【IMPORTANT NOTE】 - This camper roof vent cover is 13" x 13" ，compatible with Jensen RV Vent and comes completely assembled..
✅►【Aerodynamic design】-- The low profile aerodynamic design provides high flow ventilation, fresh air circulation in the RV..
✅►【Reinforced Center Rod】-- Fully adjustable with a reinforced center rod and a long continuous hinge for excellent stability of the RV roof vent cover..
✅►【Premium Quality】-- Made of durable, impact-resistant polypropylene,not only can the fresh air into the car, but also effectively block the UV rays, prevent rain and leaves into. The product is not sponsored or endorsed by ,or affiliated with the brands it fit,including Jensen.
RVLOVENT RV Roof Vent 12V Fan Remote Control Ventilation 14'' 10 Speed Reversible Camper Van (Smoke)
REMOTE CONTROL: Closes the lid and shuts off the fan when it gets wet. Powered-lift lid opens and closes automatically..
Powerful and Efficient: This RV roof fan provides a fantastic air circulation for your RV Tralier or Camper. And it moves a lot of air but only use little power because of this durable and stable can motor..
10-SPEED REVERSIBLE AIRFLOW: The roof vent can be used to intake fresh air in to your RV or exhaust hot air out of RV. The rv roof fan can be operated in Reverse/Forward mode. This RV roof vent fan available in Low, Medium, Max on forward/reverse direction..
EASY-TO-INSTALL: Fits all rough 14 inch x 14 inch roof openings. Screws and white interior garnish included. Built in fuse for circuit protection and 2 extra 5A slow fuse in the package. 1 extra screen frame included ..
Friendly Customer Service: Please contact us at any time if any help is needed. We will response within 10 hours..
Hike Crew 14” RV Roof Vent Fan with LED Light | 12V Motorhome Fan w/ 3 Speed Intake & Exhaust | Manual Open/Close & White Lid | Includes Screws & Garnish
Leisure Coachworks 14" x 14" opening RV Roof Vent Fan With LED Light 12V Adjustable Multi Speed Rain Sensor, Remote Control And LED Light with Smoked....
Control with Infrared remote control or buttons on vent itself. Rain Sensor closes vent lid when rain is detected..
Adjustable multi Speed - 10 Blade fan for better air flow- reversible 12V fan pushes stale air out of and pulls fresh air into your RV, camper, or....
Fully electric vent lid riser-Smoked Vent - Bright LED light on garnish..
Compatible with a 2" to 4-3/4" thick roof Fits standard 14 inch x 14 inch openings. White, high profile base and smoke dome..
SIKADEER RV Vent Insulator 22″x14″x3″, Universal RV Skylight Cover with Reflective Surface, Skylight Shade Energy Savings Sunroof Fits for 14 Inch X 22 Inch V2 RV/Camper Vents
【STAY TEMPERATURE YEAR-ROUND】- SIKADEER RV Skylight Insulation Cover blocks the air and heat exchange between the inside and outside. This allows your Camper to warm quickly in winter and cool quickly in summer, reducing energy consumption..
【FIT 14 INCH SKYLIGHT WELL】- The size of the product is 14"x14"x3", which can fit into the same-sized RV skylight perfectly. Make sure skylight sidewalls are vertical and not curved..
【INSTALL IN SECONDS】- RV vent insulator inner is a highly elastic sponge. So you just need to insert it into the vent to install. Also can be removed easily. It is very convenient for daily use and cleaning..
【EFFICIENT THERMAL INSULATION 】- This insulator with a double-layer aluminum foil bubble surface, which could reflect 97% of radiant heat.
and a 3inch thick insulation sponge fills the inside, these designs will keep your RV efficiently insulated..
【PGARDED NON-SLIP DESIGN】- The non-slip silicone particles cover the four sides of the RV vent insulator, ensuring that the insulator can be stably fit on the skylight, without worrying about slipping off..
Dumble Replacement RV Bumper Cap, RV Sewer Cap, Travel Trailer Bumper End Caps, Square 4 Inch Camper Bumper Cap, 2-Pack
STOW AWAY YOUR SEWAGE HOSE: The Dumble RV Supplies Camper Bumper End Cap 2-Pack is an RV square bumper cap that conceals a sewer hose sewage line that is stored in the RV rear bumper.
GET PROPER VENTILATION: 1-inch (2.5 cm) square vent hole in the center of this end cap for RV bumper allows for air circulation to properly ventilate the sewage line while in the RV hose storage bumper compartment.
BUILT TO LAST: Constructed from automotive-grade thermoplastic for flexible strength and longevity that resists rust and corrosion.
Jet black color to match your existing RV sewer hose storage bumper.
INSTALL IN SECONDS: Simply pop the RV camper bumper end caps onto your existing bumper sides to fully conceal the sewage hose while still allowing for ventilation.
These 4 in bumper cap plugs are a standard size that fits 4-inch square RV bumpers.
If the fit is tight, we recommend using lubrication and a rubber mallet to install.
PERFECT SIZE: Fits standard square 4-inch RV bumpers.
Requires at least 3.8-inch x 3.8-inch (9.7x9.7 cm) opening and 0.75-inch (1.9 cm) depth that goes into bumper.
4-inch x 4-inch x 1.2-inch (10.2x10.2x3 cm) overall dimensions.
Ensure that the overall size of the RV bumper sewer cap is correct.
Dumble 12V RV Vent Fan Motor Replacement with D-Shaft – RV Fan Motor, Camper Vent 12 Volt Motor, RV Exhaust Fan Motor
GOODBYE MOISTURE & SMELLS: Use the Dumble RV Supplies Bathroom Fan Motor 12V Vent Hood Motor with your existing fan to rid your RV, camper, or travel trailer of lingering smells and built-up moisture.
This roof vent motor is quiet and can be used to power an RV vent fan such as a bathroom fan or a range hood fan.
EASY TO INSTALL: Wire your fan to the motor switch, then wire the switch to your RV.
Ensure that the wires connect black to black (grounds) and the other wires connect together.
Save your old fan blades – Pull on the hub (center part of blades) off the shaft and push blade center hub back on the new motor shaft (Flat side on motor shaft used to align hole in hub and slide on).
3mm mounting screws and fan blade not included.
ROTATION: This bathroom vent fan motor replacement has reverse polarity, meaning that it can be wired to turn in either clockwise or counter-clockwise rotations.
Rotation direction depends on your fan blade wiring (one wire goes to the hot side of switch, other goes to ground).
To determine the direction of spin on your existing fan, look down through the motor at the top of the blade.
FITS YOUR RV: 1/8-inch diameter x 3/5-inch length (3.17mm x 15mm) half-moon (D-shaped) shaft.
