Pintyplus Water Based Spray Paint - 10.9 oz, Acrylic, Low GWP Propellant, Low Odor, Gloss White Spray Paint. For Wood, Metal, Glass, Craft Foam, Ceramics, Terra Cotta, Cork, Plastic
Water based spray paint formula has a low GWP propellant that is suitable for indoor and outdoor projects..
Shake the can for 1 minute and then spray from a distance of 12 in (30 cm), applying quick and thin layers, first horizontally, then vertically..
It is recommended to spray two thin layers instead of one thick one. When the job is finished, reverse the can until only gas comes out to prevent nozzle clogging..
Works on many surfaces including wood, metal, glass, craft foam, ceramics, terra cotta, cork, and plastic..
Spray paint dries in 1 hour. For a higher gloss finish, spray multiple coats at 15 minute intervals..
Once dry, the paint is highly durable, resistant to scratches and provides protection against fading..
Each can is 10.9oz (400 mL) and the color around the ring is the true RAL color..
It is highly recommended to sand any surface prior to spraying when applicable..
Make sure that the surface to be sprayed is clean, dry and free of any contaminants..
Pintyplus Water Based Spray Paint - 10.9 oz, Acrylic, Low GWP Propellant, Low Odor, Gloss Black Spray Paint. For Wood, Metal, Glass, Craft Foam, Ceramics, Terra Cotta, Cork, Plastic
Water based spray paint formula has a low GWP propellant that is suitable for indoor and outdoor projects..
Shake the can for 1 minute and then spray from a distance of 12 in (30 cm), applying quick and thin layers, first horizontally, then vertically..
It is recommended to spray two thin layers instead of one thick one. When the job is finished, reverse the can until only gas comes out to prevent nozzle clogging..
Works on many surfaces including wood, metal, glass, craft foam, ceramics, terra cotta, cork, and plastic..
Spray paint dries in 1 hour. For a higher gloss finish, spray multiple coats at 15 minute intervals..
Once dry, the paint is highly durable, resistant to scratches and provides protection against fading..
Each can is 10.9oz (400 mL) and the color around the ring is the true RAL color..
It is highly recommended to sand any surface prior to spraying when applicable..
Make sure that the surface to be sprayed is clean, dry and free of any contaminants..
HIGH-QUALITY DURABLE- Sandblasting set are Made of durable material, brass and stainless steel,which are resistant to corrosion, abrasion, and stable....
WORKING PRINCIPLE: The pressure sandblasting kit is suction-fed injection of sand into water system, use dry silica sand, baking soda or washed and....
WIDELY USE:The pressure washer sandblaster kit is great at remove rust, graffiti, paint and grease baking.Plus, they don’t create dust like a....
Note: Don't use play sand or other generic sand products. Make sure the sand is bone-dry.Dry the sand in the sun until it flows like granulated sugar....
2 X 9.25 Inch 23.5cm Car Wash Insert Bucket Dirt Remover Filter Yellow
Fits 12.5 inch diameter buckets, This is your needed tool when it comes to washing your car..
Fix sand in the bottom of barrel, protecting your car's paint from scratches and saving water..
The product's radial designed surface extracts particles such as dirt, grit, and grime from your wash mitt, providing a clean, scratch-free wash mitt,....
Fix sand in the bottom of barrel, protecting your car’s paint from scratches and saving water.
Made from polypropylene, sturdy and doesn’t have irritant odor.
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)
ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.
RIDGE WASHER Pressure Washer Sandblasting Kit, Wet Abrasive Sandblaster Attachment, with Replacement Nozzle Tips, 1/4 Inch Quick Disconnect, 5000 PSI
★Pressure washer sandblasting attachment includes a goggle, 10 feet hose, 16 inch pressure washer wand (water input), 17 inch sand wand (sand input), two hose clamps and extra two replacement ceramic nozzle kits..
★Sand blasting attachment uses baking soda, dry slica sand, washed and dried river sand..
★Sand blaster kit is made of durable material, brass and stainless steel. It has anti-corrosion and wear resistance, stable characteristics. Temperature is up to 140ºF/60ºC. Working pressure is up to 5000 PSI..
★Sandblasting kit is suction-fed injection of sand into water system. Ideal for abrasive cleaning, such as removing rust, paint, graffiti, baked on grease..
★If you have questions, contact us at any time. We provide a service of quick reply within 10 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
PROFESSIONALS CHOICE: This car detailing favorite gives fast cutting action and gloss finishing by changing buffing pads. A wool pad cuts the fastest, then foam cutting pad, then foam finishing pads to remove all fine car scratches for showroom shine..
SAFE FOR ALL PAINT: This formula contains no wax, silicone, crystalline silica, or scratchy abrasives. It's perfect for custom paint/clears or factory vehicle paint. Recommended for 1200/1500/2000/3000 grit sand scratch removal determined by pad choice..
EASY TO USE: No grit cutting, polishing or finishing makes this fast & easy to use after color sanding, buffing scratches, or as a swirl remover. It won't dry out or cause sticking & is dust-free with rotary buffing machines or DA/ Orbital polishers..
BEAUTIFUL HIGH-GLOSS FINISH: This scratch removal formula brings paint correction to the highest level as a swirl remover. It is not an oily cover-up, so scratches won't reappear.
the polishing quality shines like a finishing glaze, even on faded paint..
SMART ABRASIVE TECHNOLOGY: Mystic Cut incorporates the latest nano abrasives. The progressive cutting action causes no gritty mess. It t. It is water-based for easy clean-up. An excellent all-around compound..
Twinkle Star Pressure Washer Sandblasting Kit, Wet Abrasive Sandblaster Attachment, Dustless Sand Blasting Kit, 1/4 Inch Quick Disconnect, 5000 PSI
Pressure Washer Sandblasting Attachment: Includes a goggle, 10 ft hose, 16 inch pressure washer wand – water input, 17 inch sand wand – sand input, two hose clamps and extra one replacement ceramic nozzle kits..
High Quality: Sand blaster kit is made from durable material – brass and stainless steel. Working pressure is up to 5000 PSI. Temperature is up to 140ºF/60ºC. It has anti-corrosion and wear resistance, stable characteristics..
Sand Blasting Attachment: Baking soda, dry slica sand, washed and dried river sand can be use as sandblasting kit attachment..
Widely Use: Sandblasting kit is suction-fed injection of sand into water system, works for abrasive cleaning. Ideal for abrasive cleaning, such as removing rust, paint, graffiti, baked on grease..
Tips: ONLY SUITABLE FOR PRESSURE WASHER HOSE, PRESSURE WASHER, PRESSURE NOZZLE. NOT FIT FOR GARDEN HOSE..
Dualshine Car Scratch Remover Cloth, Nano Sparkle Cloth Magic Scratch Removal for Car- 1 Pack with Accessories, Car Paint Scratch Repair Kit and Light Scratches Remover Scuffs on Surface
★Adopting Advanced Nano-technology: Car scratch cloth using safe formula with nano-technology, no pungent odor, no poison, no corrosion and won't mess up car paint..
★ Strong Decontamination: The effect of removing the oxide on the surface of the vehicle protects the car paint for a long time and suitable for all colors of the car..
★ A Reusable Helper: Clean up and dry the surface of dirty area.
Wipe back and forth the scratches and dirt with the scratch remover cloth. Replace the sealed bag after use (spray a little water if it's too dry), which could be used for about 10-15 times.
★ Note: Repair cloth is NOT allowed to be washed before use, to ensure that the repair field has been dry. If inadvertently fell down to the sand ground, do not use to avoid secondary damage to the car.
★ Nanosparkle Cloth for Car Scratches: For slight scratches such as fingernail scratches near the door handle, it helps remove light paint scratches and scuffing of your vehicle, guano, colloid, paint oxidation, asphalt, rust stains, dirt etc, restore car color and protect paint surfaces.
