Best Sandpaper For 3d Prints

DCT Abrasive Paper 5pc Sand Paper Variety Pack with Dispenser 150, 240, 320, 400, 600 Grit Aluminum Oxide Sandpaper

  • SANDPAPER ASSORTMENT: Use the DCT | 150-600 Grit Assorted Sandpaper with Dispenser when narrow 1-inch (2.5cm) strips of abrasive sanding paper are needed.
  • Back of each roll is cloth-backed and marked with grit number approximately every 9 inches (22.9cm).
  • FINISH YOUR PROJECT: Ideal for glass sculptures, fine metal jewelry, sanding on lathes, or any detail woodworking projects such as turning spindles, pens, bowls, and moldings.
  • Fabric-backed for longer life than paper-backed or sticky (adhesive) PSA sandpaper.
  • SAVE TIME: Rolls are cut into convenient 1-inch (2.5cm) wide strips.
  • Box includes 5 dispensing slots and 1 built-in sandpaper cutting blade on the bottom edge of the box to cut off a piece of the included sandpaper.
  • Keeps everything neat and tidy so you have less waste.
  • RESTOCK LESS: Each roll is 20-feet (6m) long so you restock less.
  • The included dispenser box has the 5 rolls of sandpaper nicely organized to roll smoothly when you need it.
  • PACKAGE CONTENTS: Package contains (1) roll of each cloth-backed aluminum oxide 150 grit, 240 grit, 320 grit, 400 grit, and 600 grit sandpaper (5 total) and (1) dispenser with sandpaper cutting blade.
Check Stock

Fandeli 80 Grit Sandpaper Roll - Self Adhesive Backed Sandpaper (1 Roll, 20 Yards Long) - Premium Sandpaper Roll - Stickyback Adhesive Sandpaper - Psa Sandpaper for Automotive and Woodworking

  • FINE GRIT SANDPAPER ROLL: This professional quality sanding roll is 80 grit for heavy roughing work. Ideal for the wood industry due to its homogeneous cutting action, this sandpaper roll adhesive will facilitate your job from start to finish.
  • middle grade and heavy grinding. The 2-¾ inch wide by 20 yard abrasive rolls are sized for use with hand sanding blocks, file boards, contour sanding grips, profile sanders, file shoes and pads, longboards, or other 2-¾ inch wide hand-held sanders..
  • HIGH-QUALITY ALUMINIUM OXIDE: Fandeli longboard sandpaper is made with premium Aluminum Oxide grains and bonded with high-quality pressure sensitive adhesive backing, designed for a sharp cut and smooth finish. Thanks to its Premium Aluminum Oxide construction, you will have a quick sanding and higher performance. It has high tear resistance. Achieve a consistent, smooth finish with 80 grit sandpaper PSA. Because of its PSA adhesive backing, it makes installation and removal easier..
  • LONG LASTING: Fandeli professional roll of sandpaper has an open coat that produces an even and consistent scratch pattern. The anti-clogging technology with a layer of molten zinc stearate prevents premature capping of the product, extending its useful life. Fandeli Aluminum oxide sand....
Check Stock

320 Grit Continuous Sandpaper Roll 1" x 26 Feet Emery Cloth Aluminium Oxide Abrasive Sandpaper Roll Drum Sander Sandpaper Rolls for Wood Furniture Finishing Metal Sanding Automotive Polishing

  • The 320 Grit Sandpaper roll is made of aluminium oxide, the size of each sandpaper roll is 1 Inch x 8.7 Yard. The high quality abrasive paper is soft texture, difficult to break when used, durable, low noise, uniform effect, less dust..
  • The longboard sandpaper is easy to use, you can fold, tear or cut the sandpaper to different length according your needs to reducing unnecessary waste..
  • We have 5 kinds of emery cloth, stepping your abrasives from low grit to high grit, please choose the suitable sandpaper..
  • Our abrasive sandpaper rolls are ideal for grinding and polishing of metal, crafts, wood carving, root carving and synthetic materials..
Check Stock

KODAK PVA 3D Printer Filament, 1.75 mm +/- 0.05 mm, 350g (0.8lbs) Spool, Natural

  • EXTRA-DRY: vacuum resealable Ziploc bag with silica gel to protect filament from humidity and dust..
  • FLEXIBLE: semi-flex 3D print TPU filament with a shore hardness of 98A for shatterproof prints..
  • PREMIUM: flexible 3D filament TPU engineered to reduce jamming for reliable 3D printed parts..
  • COMPATIBLE: 3D flexible filament for most open material 3D printers..
  • ONLINE SUPPORT: We're here to help! Contact us or visit our support center. Satisfaction !.
Check Stock

ELEGOO Mars 3 Resin 3D Printer and ELEGOO Mercury X Bundle Curing and Washing Station

  • ELEGOO Resin 3D Printer, Mars 3 MSLA 3D Printer with 6.6 inches Ultra 4K Monochrome LCD and Ultra-high Printing Accuracy, Print Size....
  • ELEGOO Mercury X Bundle with Separate Washing Station and Curing Station for Large Resin 3D Prints, Compatible with ELEGOO Saturn, Mars MSLA 3D....
Check Stock

Dura-Gold Abrasive Cleaning Stick for Sanding Discs, Sandpaper Belts, Skateboards - 8" Long Natural Rubber Eraser Stick - Grip Tape Cleaner, Dirt, Grim, Debris - Clean Sander, Remove Sawdust, Residue

  • Dura-Gold Premium Quality Long-Lasting Abrasive Cleaning Stick. Large Long Eraser Stick That'S 8" Long X 1-1/2 " Wide X 1-1/2" High and Made with Professional-Grade All-Natural Rubber. It Works Excellent For Cleaning Sandpaper and Skateboard Grip Tape..
  • Use This Abrasive Cleaning Stick To Extend The Lifespan of All Your Sandpaper Sanding Discs, Sanding Belts, and Other Abrasives Used On Sander Tools and Equipment. To Clean Sandpaper Securely Hold The Abrasive Cleaning Stick Firmly Against The Sandpaper..
  • A Quick and Effective Way To Remove All The Residue That Builds-Up On Sandpaper As It'S Being Used without Damaging The Sandpaper Grit, Which Enables The Sandpaper To Last Many Times Longer For Sanding without Needing To Be Replaced..
  • This Abrasive Cleaning Stick Will Remove Sawdust, Pitch, Glue, Gum, Dirt, Body Filler, Primers, Paint, and All Other Built-Up Debris Residue and Particles That Get Caught In The Grit of Sandpaper. The Sandpaper Can Then Be Used Until The Grit Has Fully Worn Down..
  • Quickly Cleans Skateboard Gripe Tape So It Always Stays Looking Fresh! Completely Removes All Dirt, Dust, and Grim Residue From Grip Tape By Firmly Rubbing The Abrasive Cleaning Stick Across The Grip Tape In Long Full Strokes..
Check Stock

NCTPTECH 3D Glasses for Movies 10 Pairs Red\\/Cyan Cardboard 3D Glasses - White Frame

  • 3D Glasses: To be used for Anaglyph Internet images, 3D Anaglyph DVDs (movies), Anaglyph Prints and wherever red/cyan images are to be found..
  • Material: Paper 3D Glasses. Made of high quality material, comfortable to wear, durable..
  • Portable:Lightweight, Foldable and easily store..
  • Package Included: 10 Pairs of 3D Glasses, simply packaged for delivery.
Check Stock

S&F STEAD & FAST 60pcs 5 Inch Sanding Discs Hook & Loop 8 Holes Wet Dry 400 600 800 1000 1500 2000 Grit Orbital Sander Sandpaper with Tack Cloth, Silicon Carbide Round Flocking Sandpaper

  • 5 inch hook and loop sanding disc assortment: 10 pcs of 400 grit hook and loop sandpaper, 10 pcs of 600 grit sandpaper, 10 pcs of 800 grit sandpaper, 10 pcs of 1000 grit sandpaper, 10 pcs of 1500 grit sandpaper, 10 pcs of 2000 grit sandpaper.
  • High quality power sanding discs 5 inch 8 hole made with sharp silicon carbide abrasive on waterproof backing paper: tear-resistant, and perfect for wet sanding. Attention: Do not use low grit sandpaper discs on rough or sharp edges to prevent premature tearing..
  • Use our pack of orbital sander discs 5 inch 8 hole with any Random orbit sander brand including Black & Decker and DeWalt for dustless power sanding..
  • Wet and dry orbital sander pads 5 inch: Can be used for both wet and dry sanding applications but for longer life and minimal dust, use to wet sand. Excellent performance and outstanding surface finish. Wet dry sandpaper widely used for automotive work, car polishing, wood working, metal working, sanding down primers, fiberglass and plastics..
  • Extra! Includes a super useful sticky tack cloth – handy for wiping away dust, lint, sawdust and other sanding residue to leave a smooth surface ready for finishing.
Check Stock

WEEDO Tina2 3D Printers, Fully Assembled and Auto Leveling Mini 3D Printers for Kids and Beginners, Removable Plateform, Small Enclosed FDM 3D Printers for Home Use, Build Volume 3.9x4.7x3.9 Inch

  • ...Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling..
  • 【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly..
  • 【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 10*10*10 cm build plate on the substrate at the start of printing..
  • 【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate..
  • 【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room, chil....
Check Stock

3D Solutech - PREPLAWHITE Real White 3D Printer Premium PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG)

  • Dimensional accuracy: diameter variance of non more than 30 microns for consistent feeding and better 3D prints.
  • 3D Solutech PLA Filamet is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot and many others.
  • 3D Solutech engineered its professional 3D printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results.
  • 3D Solutech pla filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
Check Stock