Smart Meter Cover,Electric Meter Cover Shield, Faraday Cage Protection RF Shield Guard Block 5G with Adjustable Bottom Meter Cover
...ER]The size of the Smart Meter Cover is 7IN * 4IN, is suitable for most round samart meters in the US and Canada. Owning this Smart Meter Cover, you don’t need to worry about harmful radiation, you could cover it for a sound sleep..
5. √√√ [100% SATISFACTION]This Smart Meter Cover is proved to reduce harmful signal. While it is a good choice to gift the Smart Meter Cover to our families and friends! Help them stay protected and say goodbye to harmful frequency. If you are not completely satisfied with this smart meter cover,please contact us,we promise 100% money back or replacement. We just want to make you a happier and healthier life..
ELING Warranted MPH GPS Speedometer Odometer 160MPH for Car Motorcycle Tractor Truck with Backlight 85mm 12V/24V
Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
9-32VDC(12VDC/24VDC) Working Voltage, Red Backlight, 1 year Warranty.
ELING Universal MPH GPS Speedometer Odometer 160MPH for Car Motorcycle Tractor Truck with Backlight 85mm 12V/24V
Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
Red Backlight, 12VDC/24VDC Working Voltage, 1 year Warranty, 100% waterproof and anti-fogging protection.
VU Meter 2x Panel VU Meter Warm Back Light Recording & Audio Level Amp with Driver Board
L/GND/R: This driver board with low level signal input terminals for connections are CD players, computer sound cards, the first stage, and other audio signal source device, wiring L, GND, RW respectively: Left, the right channel.
Power Consumption:Input AC / DC 12V-15V power supply for the drive plate. (Recommended independent power transformer, or a separate power supply for the winding. the backlight current is 45 mA when drive plate off work.
2 Resistor:R1 and R2 are two adjustable resistors of driver board,which can control the size of the hands swing..
Rectifier RegulatorThe backlight DC12V power meter is used for rectifier regulator of the backlight driver board Please notice that the positive and negative head interface..
Package Content:2 x VU Panel Meter+1 x Driver Module+1 x Cable.
MATRIX MCR-5030 Benchtop LCR Meter Precision Digital Lab Tester for apacitance Ground Insulation Resistance Inductance Accuracy 0.1% Test Measure Inspect Multimeter （100Hz-30kHz）
...P】Precision digital lcr meter for labo voltage capacitor ground insulation resistance. It adopts 4.3-inch TFT LCD screen, 5-digit test resolution impedance meter instrument, multi-frequency points and 0.1% accuracy to meet the testing needs of various components and parameters..
【TEST PARAMETER and TWO DIFFERENT SIGNAL SOURCES】L,C, R, lZl, D, Q , X , ESR,θ(Deg),θ(Rad).30Ω,100Ω two different signal source output impedance..
【PRODUCT FEATURE】 Built-in comparator, 5-level sorting flexible pass and bad alarm mode. Shutdown automatically saves test conditions, user-friendly operation. Instrument software version, which can be upgraded through U disk. U disk screen copy, test data saving, support format FAT16, FAT32 file system. There are more than 100 sets of setting files inside, and U disk expansion can save or call multiple sets of test files..
【THREE-YEAR WARRANTY AND QUALITY CHECK】Buy Precision Digital LCR, you will get 1* Benchtop LCR Meter, 1* Power Cord, 1* Four-terminal Test Cord, 1* CD, 1* Test Report, 1* User Manual, 1 * Fuse table. We will inspect all power supplies and accessories before shipping to ensure that every customer receives a quality product with a three-year warranty policy..
Douk Audio VU2 MIC & Line Dual VU Meter, Analog Sound Level Indicator, 4-Way Splitter Switch, Audio Switcher Box for Speaker / Amplifier / Preamp (Light Version)
...tput at the same time to satisfy the requirements of monitoring or recording..
The USB interface of VU2 is only for providing power for the drive board of the VU meter, without any interference to the audio input and output circuit. VU meter and switcher box is controlled independently, and VU meter only reads audio signal from the I/O interface, the sound quality will not be affected..
Unique and powerful design with exquisite appearance, cool black case and colorful indicators looks vintage and dynamic. All input and output terminas are made of lengthened gold-plated pure copper with large contact area for perfect performance and ultra-low signal loss, and equipped with remote control, very convenient to use, can perfectly match with audio device of different styles and suitable for a variety of scenarios..
AC Frequency Meter LED Digital Display 20-75 Hz Signal Ac Hz Frequency Indicator Light ST16HZ Round Red White Blue Green Yellow (Blue)
MAIN FEATURE---Produce Name: LED Hz Indicator.
Applicable: circuit frequency measurement.
20-75Hz MEASUREMENT RANGE---The AC frequency meter is of wide measurement of 20-75Hz.
HIGH ACCURACY---The AC frequency meter is of high accuracy of ±2%, helping to provide you reliable data.
CLEAR DISPLAY---Made of high quality material, the AC frequency meter is of clear display, exquisite workmanship, long service life, and stable working performance.
5 COLORS---The AC frequency meter is of 5 different colors, red, white, blue, green,yellow, you can choose one according to your preference.
