COCH Zoom Bike Seat Posts Bike Suspension Seatpost 27.2mm 31.6mm Alumium Adjustable Seatpost for MTB Road Bike Mountain Bike Fixed Bike Seatpost Silver 31.6mm
Spring Coil Suspension & Reduce Bump Impact: Build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks and pain immediately. Rebound force adjustable by tighten or loose the bottom screw. Pay Attention to Choose Correct Diameter Size to avoid mistake and save your time. Different size is not compatible..
Rebound Force Adjustable & Clamp Angle Adjustable: You can adjust the bottom screw to change the spring rebound force fit to your weight to get best riding experience. Saddle clamp angle can adjust in -5 degree to +18 degree. 2 bolts hold the clamp, enhance safe and easy to install..
Multi Diameter & Colors: We offer 27.2mm, 31.6mm diameters. 3 different colors, black clamp - black body, red clamp -black body, silver head - silver body...
How to Choose the Size: 1.Check your current seatpost diameter, size marked on lower position of the post (Need to take it out from tube to see the size mark). And buy same size from the option. 2.Measure the inside diameter of the frame tube..
Suit for most Fixed Gear bike , Road Bike , Mountain Bike , Universal Bikes, etc.It fit for riders weight 50kg/ 110lbs to 180kg/ 397lbs.
Rockler HD Pipe Clamp Rack – Rack Helps to Store Heavy Duty Clamps – 12 Gauge Galvanized Steel Pipe Clamps – Store Full Rack of Clamps up to 60” Long - Garage Workshop Organizers & Storage
Rockler HD Clamp Rack: The customary way of storing pipe clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Easily store up to 60” heavy clamps at eye level and organized into two neat rows with our HD clamp rack..
Perfect For Storage: Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor..
Workshop Organization: With the Rockler HD pipe brackets clamp rack, you can say goodbye to untangling clamps! This quick clamps garage tool rack features stepped slots that accept both pipe clamps and parallel clamps..
Secure Hold: These racks are heavy-duty and hold woodworking pipe clamps securely. The clamps will not fall off even if bumped. The installation of these rack tool holders for your garage wall are pretty easy, it just requires lag bolts..
High Quality: This large pipe clamp storage rack is made of sturdy, 12 gauge steel & can support a full rack of bar clamps up to 60'' long. The footprint is very compact, saving you both wall space and floor space..
COCH Zoom Bike Seat Posts Bike Suspension Seatpost 27.2mm 31.6mm Alumium Adjustable Seatpost for MTB Road Bike Mountain Bike Fixed Bike Seatpost (Black+red, 27.2mm)
Spring Coil Suspension & Reduce Bump Impact: Build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks and pain immediately. Rebound force adjustable by tighten or loose the bottom screw. Pay Attention to Choose Correct Diameter Size to avoid mistake and save your time. Different size is not compatible..
Rebound Force Adjustable & Clamp Angle Adjustable: You can adjust the bottom screw to change the spring rebound force fit to your weight to get best riding experience. Saddle clamp angle can adjust in -5 degree to +18 degree. 2 bolts hold the clamp, enhance safe and easy to install..
Multi Diameter & Colors: We offer 27.2mm, 31.6mm diameters. 3 different colors, black clamp – black body, red clamp -black body, silver head – silver body...
How to Choose the Size: 1.Check your current seatpost diameter, size marked on lower position of the post (Need to take it out from tube to see the size mark). And buy same size from the option. 2.Measure the inside diameter of the frame tube..
Suit for most Fixed Gear bike , Road Bike , Mountain Bike , Universal Bikes, etc.It fit for riders weight 50kg/ 110lbs to 180kg/ 397lbs.
DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack
TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
Bolts and washers are 5/16”-18 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack
TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
Bolts and washers are 1/4”-20 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit
▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Three sets of 29" x 6' Scaffold Rolling Tower with 3 Sold plywood decks (not hatch deck), and adjustable decks at 2 inch increments.
System with U Lock Brace for safety and One set of Guard Rails for a safe and comfortable working platform.
One set of 4 wide 270 degree swing Outriggers with swivel Caster Wheels to adjust to your area.
WE SHIP ANYWHERe IN THE USA EXCEPT FOR PR, AK ,HI AND ZIP CODES BETWEEN 01000 - 34000, please ask free shipping before you buy. THERE ARE SOME AREAS....
FOMTOR Bike Suspension Seatpost 27.2 350mm MTB Adjustable Seat Post for Mountain Bike Road Bike Folding Bike Track Bike MTB BMX
Suspension seatpost. Build-in PU spring.Help to alleviate the shocks from all the bumpy roads.Help to make your bike very comfortable to ride.It can....
Made of 6mm High quality aluminium alloy.Light weight,never rust..
Saddle clamp angle can adjust in -5 degree to +18 degree. 2 bolts hold the clamp, enhance safe and easy to install..
Suitable for most Mountain bikes, Road bike, Downhill bike, Track bike, MTB, BMX, DH, etc.
OneChoi Belt Grinder Knife Jig, 9-3/4’’ Long Sharpening Locator Adjustable Angle -5°~ 25°, Belt Knife Sharpener Jig with Dual Press Plates,Knife Making Angle Grind Guide for Belt Sander Machine
... processing. The dial is engraved with a scale with an adjustable range of -5°~25°. The lock knob and turnbuckle combination on the dial ensure zero movement. The pointer can be adjusted with a wrench to achieve absolute precision. The Super fine thread turnbuckle can be adjusted absolutely accurately..
∮EASY TO Clamp∮ -It has 52 tapped mounting holes (1/4-20 UNC) and 8 additional bolts to connect your knives, 2 galvanized rectangular clamp plates and bolts can be used to fix knives at any height for many different knife models. Clamping the blade securely to the bevel jig with 2 clamps rather than the bolts, it will get a firmer grip and accepts up to 11 mm (0.4”) thick blades..
∮COMFORT USE∮ -The aluminum handle gives a solid feel without extra weight. The most common aluminum profile in use today is T6-6061 alloy, which has very high tensile strength. The aluminum alloy handle is engraved with aluminum patterns, which can relieve physical exertion from the hands of the master (muscle tension, vibration loads on tendons and joints..
∮EASY TO Grind∮ -The sharpening Jig is suitable for most electric or manual grinders with or with tool rest. It can be quickly and easily installed directly on the worktable in front of the grinder. The fix....
