SKYRC iMAX B6 Mini Professional Balance Charger / Discharger for RC Lipo Battery Charging
Lithium Battery Meter: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell..
Internal Resistance Meter: Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them..
This charger and the battery should be put on a heat-resistant, noninflammable and nonconductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from operating area..
Genuine, Authentic, Original iMax B6 Mini Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity..
Package Contains: 1x SKYRC B6 mini Charger.
1x T Plug with Banana connector Charging Cable.
1x DC Cable with Alligator Clip Charging Connector.
1x T Plug with Alligator Clip connector Charging Cable.
SATA Power Cable 3 Pack SATA 15-Pin to 6-Pin PCI Express Card Power Cable Adapter 8 Inch
Sata Power Cable Usage: Use one of the SATA power connectors on the power supply to add a Sata 15-pin to 6-pin adapter that allows you to use the SATA power cable to power the video card inside the computer. Provides a cost-effective way to connect the PCI-E video card to the serial SATA power connector provided by the computer power supply..
Connector: 15-pin SATA male connector, and 6-pin female PCI Express card power adapter.
Cable material: 6 Pin PCI-e to SATA Power Cable 18 AWG Full Copper.
Standard length: The SATA power cable has an 8-inch (20 cm) long connector, and the Sata 15-pin to 6-pin adapter is ideal for internal cable management..
Safe connection: Connecting the SATA power cable can reduce the risk of damaging the internal connectors that are difficult to connect and unplug, and can also reduce the tension on the SATA drive or the connector of the computer motherboard.
Comet Original GP-1 146/446 MHz Dual Band Heavy-Duty Fiberglass Vertical Base Antenna - 4' 2', SO-239 Connector
Frequency Range: VHF 136-174MHz, UHF 400-470MHz.
Antenna Interface Connector: UHF PL259 Male 50 Ohm Connector.
Antenna Mounting Connector: UHF SO239 Female Right Angle Bulkhead Mount 50 Ohm Connector.
Cable Connector: UHF PL259 Male 50 Ohm Connector.
Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, Stryker.
Package List: 1 x Antenna, 1 x Cable, 1 x Lip Mount Bracket(including Hexagon Wrench) (As the Picture Shown).
Mugteeve Dual XLR to 1/8 Stereo AUX Cable, 10FT Double XLR Male y Splitter Cord to 3.5mm TRS Mini Headphone Jack, OFC Shield no Hum no Buzz, for Studio Monitor Speakers, Laptop, DMX Adapter
...This cable is designed to carry audio signal from 1/8 jack device like mobilephone, computer, tablet and MP3, to XLR input device include mixer, DJ console, studio monitor, speaker, etc. Due to this cable can separate left and right channel signal, it is often used in audio recording and editing. The 1/8 mini TRS connector can work in both 3.5mm TRS or 3.5mm TRRS jack, please don't worry..
【Specification】This 1/8 to dual XLR splitter cable is 10FT/3meters long. It's nylon braided, strong and heavy duty. 3.5mm connector is gold plated, gold plated design can reduce signal distortion. 2 XLR end has blue and red ring, they will help you to distinguish left and right channel signal. The cable will give a soft feeling..
【OFC shield, noise free】This mini TRS to double XLR breakout cable is full covered with spiral OFC(Oxygen Free Copper). OFC layer can effectively keep out RFI and EMI. Under the OFC layer, there is also a aluminum foil layer. With OFC and aluminum foil layer, this cable will carry your signal without having to worry about interference. Anyway, we do not suggest to put the cable over AC power plugs, power adapters, chargers and others that ouput RFI and EMI..
【Important Notice】VERY VERY import, please kindly note that though t....
ASHATA HDMI to Scart Converter, HD Audio Video Multimedia Interface to SCART Converter with Power Cord, PAL/NTSC Switch, for HDTV Monitor Projector STB DVD Player, etc
Plug and Play: No need to install drivers, plug and play, light and flexible, easy to carry and use..
High Definition Conversion: High quality scaling technology is used to process the input resolution, and the conversion effect is good..
2 Kinds of Output Standard Support: Support NTSC and PAL two standard TV mechanism output..
HD Multimedia Interface Compatible: Support HD Multimedia Interface 1.3 and backward compatible..
HD Multimedia Interface to SCART Converter: HD video adapter, HD Multimedia Interface signal input, SCART output..
Cable Matters Active USB C Cable 24.6 ft for Oculus Quest 2 Headset and Hard Drives (Compatible with Oculus Link Cable Feature) in 7.5 Meters / 24.6 Feet - Not Compatible with Monitors or Docks
...s compatible with the Oculus Quest and Oculus Quest 2 headset’s Oculus Link cable feature, and is designed for VR in mind.
USB-C cable is compatible with the Oculus Quest link cable port / Oculus Quest 2 link cable port.
Play PC VR games on the portable Oculus Quest 2 headset.
Uni-directional active USB cable host connector connects to laptops and desktop PCs, and the 90-degree USB-C connector connects to VR headsets and other USB-C devices.
Extend the limits of PCVR with a 7.5-meter (24.6-foot) cable.
Long VR cable makes large VR play spaces possible.
Game away from a PC, monitor, and other obstacles with the long USB-C cable.
USB-C VR cable connector and USB-C PC connector supports connecting to PCs with USB-C ports.
The USB-C cable is purpose-built for VR, and features a durable 90-degree connector at the VR headset end for an unintrusive and reliable connection.
Active chipset of the USB C cable boosts the signal to ensure flawless video, audio, and tracking support for intense VR sessions.
Cable has been thoroughly tested for compatibility with the Oculus Quest link feature.
USB-C cable supports a data transfer rate of up to 5Gbps, making the cable useful as a standard USB-C cable for other devices like smartphones and tablets. Does not support US....
Tecreddy CB Radio Antenna Soft Whip BNC & PL259 Male CB Antenna with Magnetic Base Compatible with Cobra Midland Uniden Maxon President Portable Handheld CB Radio Car Mobile Radio Scanner
Compatible with all handheld CB radios with a BNC or UHF connector, improve quality and range to CB radio reception. Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C..
This soft whip antenna can be removed and installed directly on the CB radio for use. The antenna design is soft, flexible and durable. It can also be used on a magnetic base. Both usages are very convenient..
Antenna&Cable Connector Type: BNC Male Connector.
Cable Connector Type: BNC Male Connector.
Accessories: UHF PL-259 Male to BNC Female Connector.
Package Includes: 1 x Antenna, 1 x Magnetic Base, 1 x Connector.
