Best Sclcr Lathe Boring Bar Set

MABUARN 5/16 Shank Nickel Plated Turning Holders 7 Sets CNC Lathe Turning Tool Holders with Indexable Carbide Inserts for Turning Grooving Cutting Threading

  • Turning tool holders material: High speed steel.
  • 5/16" (8mm) shank. Indexable Inserts material: tungsten carbide. Stable and durable..
  • Surface treatment: Nickel plated, quenching and hardening..
  • Model of 7 pieces turning tool holders: MGEHR0808-2, SER0808H11, SDNCN0808H07, SDJCR0808H07, SWLCR0808H04, SCLCR0808H06, SCLCL0808H06. Model of 7 pieces applicable inserts: MGMN200, 11ER AG60, DCMT070204, WCMT040208, CCMT060204.
  • Suitable for: CNC lathe external turning, threading, grooving, cutting, etc..
  • Packing includes: 7 pieces turning holders, 7 pieces carbide inserts, 3 pieces keys, and 1 piece aluminum case..
Check Stock

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

  • Quickly and easily install on an engine, bench, or turret lathe for a wide range of operations. Fully interchangeable with Aloris, Dorian, Phase II,....
  • This set includes: No. 0 Wedge Type Tool Post(1.75" L x 1.75" W x 2.5" H), No. 1 Turning & Facing Holder(up to 1/2" tool capacity),.
  • No. 2 Boring Turning & Facing Holder (up to 1/2" tool capacity), No. 4 Heavy Duty Boring Holder (3/8" & 1/2" tool capacity),.
  • No. 7 Universal Parting Blade Holder (1/2" tool capacity), No. 10 Knurling, Turning & Facing Holder (up to 1/2" tool capacity)..
  • Stud size is M10 and is perfect for most mini lathes, although modification may be needed for some machines (a bushing or new center stud for a....
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • 【PRODUCTS INCLUDE】 - Lathe tools including(1)10.7"handle (2) 7.9"wood turning tools including square,round,diamond,square arcs(3)easy to replace the head of the T15 wrench,all parts are made of special hard sponge full fitted wrap,in the box..
  • 【5 SECONDS QUICK DISASSEMBLY】 - No tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame c....
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

Boring Head Set, Carbide Boring Bar MT2 -M10 F1-12 50mm Boring Head with 9pcs 12mm Boring Bars Milling Machine Accessories for Boring and CNC Milling Machine Tools

  • SUITABLE FOR : The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • USED FOR : This tool set is made of high quality material, good wear resistance, and durable in use.It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • PACKAGE LIST : This tool set contains 1 x drawbar thread: MT2 M10*1.5 1-1/2"-18UNF,1 x F1-12 50mm boring head with 12mm hole accept ,9 x boring carbide tips with 12mm shank,3 x keys ,1 x plastic case.
  • QUALITY ASSURANCE :100% brand new and the quality of our products is guaranteed.We supply fast and convenient return or replace service to insure purchasing without worries. If you have any questions about our products,please feel free to contact.
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Lathe Threading Tool SER1010H11+SNR0010K11 Inserts 5pcs 11ER AG60 +5pcs 11IR AG60 for Boring Bar Holder CNC Turning Tool

  • 【1】Package: 1pc SER1010H11 Lathe Threading Tool, 1pc SNR0010K11 Boring Bar, 5Pcs 11ER AG60 Threading Inserts, and 5Pcs 11IR AG60 Carbide Inserts,....
  • 【2】The parts have good rigidity, long service life and lower the cost of tools..
  • 【3】Features high grip strength, impact resistance, fast cutting and processing.
  • 【4】It is convenient for the user to clamp and replace, and only a wrench is needed to complete the replacement of the blade and blade pad..
  • 【5】Practical and diverse processing environment, even in very dirty environment such as cast iron, also has very good characteristics..
Check Stock

uxcell Indexable CNC Lathe Turning Tool Holder 93°DVJNR2020K16 3/4 Shank Carbon Steel Carbide Turning Tool Holder for Turning Grooving Threading

  • [Specification] - Cutting Angle: 93°, Cutting Direction: Right, Material: High Steel, Model: DVJNR2020K16, Holder Width: 20mm / 0.79inch, Holder Thickness: 20mm / 0.79inch, Total Length: 125mm / 4.92inch, Available Inserts: VNMG16 Inserts.
  • [Durable to Use] - The material of the turning tool holder is Carbon Steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance..
  • [Finish] - Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size for easy identification of the tool holder..
  • [Wide Range of Applications] - The boring bar is suitable for cutting step surface processing and other processing..
  • [Package Content] - You will receive 1pc indexable lathe turning tool holder(carbide insert not included) and 1pc wrench..
Check Stock

Face End Mill Set,MT3-FMB22 Holder Extension,400R-50-22 Face End Mill Cutter,10pcs APMT1604 CNC Carbide Inserts,Good Impact Resistance,High Hardness,for Plate Cutting,Steel Material

  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection hole is connected more closely, which reduces the machining error.
  • HIGH PRECISION PROCESS:Our Mill Cutter kit adopts high-precision machining technology. The high-carbon steel material improves the hardness and durability of the surface, providing a comfortable feeling and beautiful appearance.
  • PROCESSING RANGE: This MT3-FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material.
  • WIDELY USED: The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
  • GOOD IMPACT RESISTANCE: Our face end mill cutter is a good ideal tool for heavy CNC milling cutting,Model: 400R--Inner hole: 22--Number of blades: 4--Inserts type: APMT1604--Inserts quantity: 10pcs.
Check Stock