Best Screw For Adjustable Leg

IFOOTAGE 65' Carbon Fiber Video Tripod with Fluid Drag Pan Head, Professional Camera Tripods 3 Sections with Centre Pole,Max Load 17.6 lbs, Compatible with DSLR Camcorder Video Photography

  • Professional Video Head: Comes with 1/4 inch mounting screws which fit most standard video equipment.
  • Standard 3/8 inch threaded screw port on the bottom makes it suitable for all tripods, monopods, light stands, and camera sliders..
  • Ergonomic Design: Fluid head pan/tilt locking,360° pan and +90°/-83° tilt range.
  • effortless photography and videography shooting..
  • Ultra Low Angle Shooting: The leg spread come with adjustable angle of 80° on this means it offers lower shots minimum height of 7.6 inches than many other competitor’s tripods-useful when you are on location and need a steady low angle shot..
  • Quick Telescopic Design: Each leg has an automated locking system, operated at the top of the tripod providing a choice of three leg lock angles for set up with angle of 22°,50°,80°. Leg adjustment buckles can lock securely time after time without palm pinch..
  • Compact and portable: it can be folded to 25″, Can be packed into a standard suitcase if required, avoiding the need to have special handling at the airport. Ideal for travel and work..
Check Stock

MAKEOMG Folding Adjustable Position Assist Chair Portable Couples Mount Stool Elastic Furniture for Bedroom Bathroom Bear Weight up to 300 pounds

  • MONEY SAVER - Table Leg Hardware Replacement Kit For Furniture Wood Feets Is Big Money Saver As It Comes With All The Things You Need To Replacement Legs For Couch Or Your Furniture Leg M8 Screw And Cap, 4 Felt Pads, 4 Metal Pads(T Nuts Bracket Plate), 2 Drills Bits(12mm, 3mm).
  • HARDWARE FOR FURNITURE REPLACEMENT LEGS - This Furniture Leg Mounting Kit Can Attach Legs To Any Sofas, Couches, Seats, Dresser Or Ottomans. The Leg Mounting Kit Comes With Right 2 Size Drill Bits To Replace Your Furniture Legs Easily and Quickly..
  • 2 DRILLS BITS - Furniture Feet Set Comes With 2 Drills Bits (12mm, 3mm) Which Saves Time And Money And Makes Replacement Furniture Legs Easy And Fast. 12mm Drill Helps You To Make Exact Hole For Wood Legs And 3mm Is Perfect For Screws..
  • ALL ON ONE KIT - 2 Drills Bits (12mm, 3mm), T Nuts Round (Metal Pads) M8 Screw, 3M Felt Pads Makes It Perfect All In One Table Leg Mounting Hardware Kit..
Check Stock

MidTen Hunting Rifle Bipod 6-9 Inches Adjustable Foldable Legs Super Duty Tactical Bipods for Rifles with Picatinny Adapter

  • 【Suitable for Sling Stud】This bipod is easy to attached to sling stud. In addition, this bipod can be easily mounted or removed through the thumb screw at the bottom..
  • 【Adjustable and Foldable】The length of the leg can be adjusted from 6 inches (152 mm) to 9 inches (225 mm) by pressing the return spring and leg release button. This bipod has 5 leg dents designed to keep your bipod firmly in place at different heights. The bipod legs are foldable, which make it easy to carry and storage..
  • 【Scratch-Resistant】Forend pads prevent your picatinny rail from scratching, which can slow down the aging rate of bipod and picatinny rail..
  • 【Sturdy and Durable】Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight. The bipod is firmly anchored to the ground when you are hunting or shooting, and can't be damaged by strong recoil..
  • 【Skid Resistance and Shockproof】High quality rubber on the bottom of the bipod legs makes the bipod shockproof and antiskid..
Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Table Chairs Glide Levelers with Nut- 1.49\ Dia Base,5/16-52 Thread Size,2.75\ Thread Length for Furniture,Tables, Chairs, Cabinets

  • Adjustable Furniture Glides made of metal ,with flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Dimesion:Total length: 3.14" (80 mm), screw length: 2.75" (70 mm), thread size: M8 * 2.75"(70 mm)-5/16“-52 thread, base diameter: 1.49" (38 mm).
  • Easy to install:Drill a 5/16" hole , 2.75" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Table Chairs Glide Levelers with Nut- 2.08\ Dia Base,5/16-50 Thread Size,2.75\ Thread Length for Furniture,Tables, Chairs, Cabinets

  • Adjustable Furniture Glides made of metal,with flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Dimension:Total length: 3.14" (80 mm), screw length: 2.75" (70 mm), thread size: M8 * 2.75"(70 mm)-5/16“-50 thread, base diameter: 2.08" (53 mm).
  • Easy to install:Drill a 5/16" hole , 2.75" deep hole using 5/16" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock

CNBTR Adjustable Furniture Glides 50mm Dia Table Desk Leveling Foot Leg M8 Pack of 4

  • The furniture feets made of high quality material Nylon and Metal. Easy to be installed and the height is adjustable as your require..
  • Adjustable thread design for office or household light duty furniture with threaded sockets..
  • The swivel furniture leg levelers can be placed both indoors and outdoors on tables, chairs, shelving units, kitchen cabinets, plant stands..
  • Heavy duty - The swivel leveling feet are made of high quality metal screws and nylon base plates..
Check Stock

TOVOT 4 Pack of Adjustable Furniture Leg Leveling Glides/Screw On Table Chairs Glide Levelers with Nut- 2.36\ Dia Base,3/8-30 Thread Size,1.96\ Thread Length for Furniture,Tables, Chairs, Cabinets

  • Adjustable Furniture Glides made of metal and nylon ,with thickened flat bottom base, increase the overall force surface, and increase the load capacity.
  • Heavy Duty Adjustable Leg Leveling Glides with strong and sturdy quality and favorable price,good furniture replacements parts for older furniture.
  • Dimesion:Total length: 2.95" (75 mm), screw length: 1.96" (50 mm), thread size: 10 * 1.96"(50 mm)-3/8“-30 thread, base diameter: 2.36" (60 mm).
  • Easy to install:Drill a 3/8" hole , 1.96" deep hole using 3/8" drill bit.Screw in leveler to the desired height.Set of four levelers has a load capacity of 1000 lbs.
  • Used for furniture ,chair,table,garage tables to garden benches enhance the height of cabinet ,and Moisture,Non-slip,Prevent tables and chairs from scratching the floor.
Check Stock

Neewer 78.7 Inches/200CM Photography Tripod Light Stand Foldable and Adjustable Aluminium Alloy for Photo Studio Cameras Lights Softboxes Umbrellas and More Carrying Case Included

  • USER-FRIENDLY DESING: This light stand has a upgraded design with a tripod-style with tripod function that each leg of the tripod can be stuck on 3....
  • HEAVY DUTY AND STURDY: It is made of aluminum alloy and the diameter of 4-Section Vertical Tube is 15mm-20mm-24mm-27mm, giving it exceptional strength....
  • PROTABLE AND LIGHT-WEIGHT: Maximum Height: 78.7inches/200cm.
  • ADJUSTABLE STAND: The adjustable height of the stand can meet all of your shooting needs. Sandbags can be added to increase the base weight if....
  • STANDARD SCREW: 1/4 inch screw tip on the stem so that it can be used with multiple different photography equipment such as stand, such as reflector,....
Check Stock

Neewer 2-Pack 78.7 Inches/200CM Photography Tripod Light Stand Foldable and Adjustable Aluminium Alloy for Photo Studio Cameras Lights Softboxes Umbrellas and More Carrying Case Included

  • USER-FRIENDLY DESIGN: 2 light stands are included. The light stand has an upgraded design with a tripod-style with tripod function that each leg of....
  • HEAVY DUTY AND STURDY: It is made of aluminum alloy and the diameter of 4-Section Vertical Tube is 15mm-20mm-24mm-27mm, giving it exceptional....
  • PROTABLE AND LIGHT-WEIGHT: Maximum Height: 78.7inches/200cm.
  • ADJUSTABLE STAND: The adjustable height of the stand can meet all of your shooting needs. Sandbags can be added to increase the base weight if....
  • STANDARD SCREW: 1/4 inch screw tip on the stem so that it can be used with multiple different photography equipment such as stand, such as....
Check Stock

Neewer Camera Tripod Monopod Carbon Fiber with Rotatable Center Column - Portable Lightweight, 72.4 inches/184 Centimeters, 360 Degree Ball Head for DSLR Camera Camcorder up to 33 pounds

  • ...EMIUM CONSTRUCTION AND STRONG STABILITY: Max. 28mm large diameter carbon fiber tubes with load capacity up to 33 pounds/15 kilograms, and non-slip feet design provide security and stability support for your DSLR cameras.
  • Dense sponge grips on the leg is anti-skid, defensive cold and keep warm.
  • 003cp003ePRACTICAL AND ADJUSTABLE: The length of the 4 legs can also be adjusted easily through spiral type locking knob. The height of the tripod can be extended to Max. 72.4 inches/184 centimeters and folded to 26.4 inches/67 centimeters for easy carrying.
  • Length of the center column: 18.9 inches/48 centimeters. One of the leg can be removed to change into a monopod (52.5-144.5cm) or walking stick..
  • 003cp003ePRECISE AND FLEXIBLE: The bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position.
  • Equipped with a professional 360-degree metal rotating ball head to provide panoramic shooting. QR plate with 1/4-inch screw is compatible with Canon Nikon Sony and other cameras camcorders.
Check Stock