OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case
OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters for Most 2WD and 4WD Cars and Light Trucks BL
EASY OPERATION: Use the ORION MOTOR TECH Ball Joint Press Tool Set with 4WD Adapter to effortlessly remove press-fit parts including ball joints,....
UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter....
PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that....
PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If....
Temery Watch Press Set, Watch Back Case Closer, Watchmaker Watch Repair Tool Kit with 12pcs Fitting Dies
Coming with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch..
Easy & quick to fix watch: only three steps - choose two suitable dies, screw them on the press tool, and then press down the handle..
Good for closing your snap back watch case after repairing job, not for crystal apart. Note: Before pressing the cover, make sure to use the correct fitting dies to avoid damaging the watch..
Equipped with a cleaning cloth for padding under your watch while press to protect your watch well..
CGOLDENWALL Upgraded Oil Press Machine Automatic Oil Presser Cold Hot Press with Intelligent Control Panel/ LCD Touch Screen/ 6 Kinds of Temperatures Optional/ Food Grade Stainless Steel/ Built-in Thrust Bearing, Oil Extractor for Commercial Home Use
5.25 INCHES INTELLIGENT CONTROL PANEL & LCD TOUCH SCREEN -- In addition to adjusting the automatic/manual mode and pressing temperature, the LCD screen also clearly displays the working status, heating time, temperature level and mode of the oil press..
6-GEAR INTELLIGENT HEATER -- Our K28 oil press is equipped with a 6-Gear Intelligent Thermostat Heater. There are six operating temperatures available, namely Fire1/2/3/4/5/6 (140°/160°/180° /200°/220°/240°). You can choose the most suitable temperature according to different materials..
COLD&HOT PRESSING -- Our oil expeller supports two modes of oil pressing: cold and hot. Cold pressing better retains the nutritional value of the oil.
hot pressing can squeeze the oil more efficiently, and the oil will be pure and aromatic..
BUILT-IN THRUST BEARING -- The thrust bearing of our K28 oil presser is built into the motor, fundamentally rejecting the edible oil being contaminated by the engine oil and metal powder, and greatly increasing the service life..
WIDER PRESS RANGE & HIGHER OIL YIELD -- More than 24 kinds of mat....
ROGTZ Electric Car Jack kit 5 Ton 12V Car Jack Hydraulic Jack with Impact Wrench and Tire Inflator Pump, Car Lift Floor Jack for SUV Sedans Tire Change with LED Light (Black)
...max height(lifting height range:6.1~17.7 inch) .The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools..
√Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve.
Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened.
√SAFE AND SECURE TO USE:Our electric hydraulic jackis will automatically stop working after reaching the height limit.The jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use..
√MATCH MOST VEHICLES:The electric jack kit 's two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows any adult to change and repair tires at any time on the garage/highway,best choice for your car, truck or SUV.....
2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool
★【What You Get】: In this thread pitch gauge kit, it include 51Pcs America SAE type, 52pcs metric and Inch type, 3pcs metric & america SAE type & British Whitworth, they are well packed in a plastic box, easy for carry and store..
★【High Quality】: All the thread pitch gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
★【Measuring Range】: 51pcs America SAE type measuring range is 4-84.
58pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the thread blades, numbers are stamped clear for read..
★【Wide Application】: They measure accurately and have almost no errors. Typically used to check the mold & machine & mechanical thread size determination is correct.
Accurately measures internal and external screw threads with thread blades of varied size.
Center Gauge use to grind and position thread cutting tool on a lathe..
DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer
... Easy to Operate: The ball joint service auto tool kit is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. .
Wide Compatibility: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four wheel drive (4WD) vehicles, as well as lightweight pickup trucks with press fit ball joints. The 4WD ball joint service kit allows service for 1967 to present 1/2 and 3/4 ton four-wheel drive vehicles with Dana 30 or 44 front axles (compatible with Ford, General Motors, Dodge, IHC, and Jeep vehicles)..
Package Included: 1 x Ball Joint Press (C-Clamp), 1 x Jack screw (Forcing C-Screw), 1 x Installation Adapter, 1 x Removal Adapter, 1 x Installing Cup, 1 x Receiving Cup, 1 x Installation Cup Adapter, 3 x Receiving Tubes.
Raw Virgin Premium Ethiopian Cold Pressed (First Press Only) Black Seed Oil
Raw Virgin Ethiopian Black Seed Oil (50ml) 2.5% TQ. Worlds Strongest Black Seed Oil.
50ml Strong Cold Pressed (First Press Only) Black Seed Oil, a stronger and more effective Black Seed oil Sourced from Ethiopia which is known for producing THE MOST POTENT oil in the market Premium Ethiopian Nigella Sativa Seeds pressed only once using the correct cold press method.
High Volatile Oil Content - 3.9% Thymoquinone - 0.7%, Rich Source of Omega 6 and 9 Grown using traditional farming techniques with no pesticides, hand picked.
Control System: Tiller control Starting System: Manual start..
【Details】Control System: #93 gasoline.
Recommended Propeller range: 3 -9"1/4''x8".
Recommended Lubricant: 2 Stroke Lubricating oil.
【Advantages】water cooling technology improves the reliability of the whole machine.
light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..
