XINGYHENG 180Pcs 4Kinds 304 Stainless Steel #6#8#10#12 Stainless Steel Cup Countersunk Washer Assortment Kit Silver Finishing Cup Washer with A Clean Plastic case
A SET OF CONVENIENCE TOOL: These countersunk washer is made of 304 Stainless Steel. Corrosion resistant galvanized finish, Stable and long life, non-pollution. It is a convenient accessory for your tool kit, which is very suitable for the maintenance of accessories. The compact and portable design will bring you more convenience and fast..
MULITE SIZE: Mode include #6 #8 #10 #12, total 180pcs. Compete sizes meet your all requirements. Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance. Prevents the screw from pulling through the material..
UNIQUE DESIGN: Stainless steel cup countersunk washer are available in 4 common sizes for convenient, all-around and multi-sided classification kits, making them ideal for use, easy to lock, , non-isosceles, easy to operate, standard size, not easy to slip , more convenient and quick to use..
THE HIGH QUALITY WASHERS: These washers are corrosion resistant, durable. Stainless steel with superior rust resistant ensure long lasting results..
WIDELY USE: Widely used in manual DIY production, robots, aircraft, 3D printing equipment, communication equipment, petrochemical industry, marine power facilities, architecture and other fields..
Nylon Large Flat Round Washer Countersunk Clear Plastic Spacer Thickness Gasket Ring Standard Hardware Tool Fastener for Screw Assortment Kit M5 M6 M8 M10 M12 M14 M16 M18 M20 White
A flat washer is a round outer diameter thin ring with a center hole (inner diameter) punched to a size just larger than a bolt or screw. Flat washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened. While there are many types of flat washers standard are the most commonly used..
Brass flat washers are made of Dezincification resistant (DZR or DR) brass.
Normal brass flat washers do not meet this standard and have high corrosion risk.
Brass flat washers are suitable for high water temperatures, deviating water qualities (soft water) or where chloride is present.
Steel Flat Washer,900pcs M3-M10 A3 Plain Washers Assortment Kit with Box for Distribute Load of Threaded Fastener
✔【 Rational Design】- The washer is a thin disk-shaped plate with a hole in the middle that is normally used to distribute the load of a threaded fastener, such as a screw or nut..
✔【Function 】- These washers can be used as a spacer, wear pad, pre-load indicating device, locking device, and to reduce vibration..
✔【Meet Your Need 】- Each set includes many flat washers that can be used for a long time, flat washer is applied when the hole is a larger diameter than the fixing nut..
✔【Usage 】- High-quality bolted joints require hardened steel washers to prevent the loss of pre-load after the torque is applied..
✔【Characteristic 】- The washers are also important for preventing galvanic corrosion, particularly by insulating steel screws from aluminum surfaces..
NINDEJIN 910pcs M3 Male Female Hex Brass Standoff Spacer with Pan Head Screw Nut and Washer Assortment Kit PCB Motherboard Standoff Screw Nut Assorted Kit
...doff Spacer Assorted Kit]: This kit includes male to female, female to female hex brass standoff spacer, with pan head screw, hex nut, washer, it's convenient for your electronics working, such as printed circuit board and motherboard..
[Quality of Standoff Screws]: Standoff spacers are made of brass, screw, nut and washers are nickel-plated, have good corrosion resistance and are passivated for enhanced protection. They may be mildly magnetic. The flat sides of the hex ensure a firm grip when tightening with a wrench..
[Motherboard Standoff Screw Using]: In electronics, they are frequently used to raise a printed-circuit board above a surface. Standoffs are ideal fasteners for keeping printed circuit boards both stationary and elevated away from surfaces, such as the interior of a computer chassis..
[Standoff Screw Nut Assorted Kit Package ]: Included Male-female, Female-female series, Hex nuts, and flat washers. These fasteners stored in a transparent plastic box, convenient for your storage and use..
[NINDEJIN After-sales Service]: If you have any problems with NINDEJIN screws assortment kit, please contact us by email or Q&A, we will give you a professional service and reply to you within 24 hours. We will provide Lifetime technical supports and the ....
DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack
TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
Bolts and washers are 5/16”-18 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack
TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
Bolts and washers are 1/4”-20 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
Universal TV Mount Screws, Stainless Steel TV Mounting Hardware Kit Includes M4 M5 M6 M8 TV Bolts, Washers, and Spacers, Fit All Flat and Curved Screen TVs up to 80 inches (105 pcs)
【Complete TV Mounting Hardware Kit】 No more having to running back and forth to the hardware store! This TV Mounting Hardware Kit has everything you need to attach your TV to the wall mount..
【Compatible will All TV Brands】 Fits Samsung, LG, Sharp, Philips, Panasonic, Toshiba, Sony, Vizio, TCL, Sanyo, Insignia, Hitachi, Polaroid, RCA, JVC, Apex, Daewoo, Pioneer, Hisense and other TV brands. Compatible with most flat or curved TVs..
【Package Includes】 The pack contains M4, M5, M6, and M8 TV screws, M4, M5, M6 and M8 washers, 2.5mm and 22mm spacers for mounting tv up to 80". Toatl 105 pieces.
【STAINLESS STEEL, NOT RUST】 The TV screw bolts and washers are made of top 304 stainless steel,will not deforme or rust. Stable and Sturdy enough for long time use. Provide great stability and durability for your tv mounting..
【Clearly Labeled Package for Easy Use】 Each size of screw, spacers and washers is pre-divided with clear label which can save your time on finding the correct size..
Glarks 204Pcs M8 Metric 304 Stainless Steel Phillips Round Head Machine Screws Hex Socket Head Cap Screws and Hex Head Screw Bolts with Hex Nuts Flat Washers Lock Washers Assortment Kit
➤[Package Includes]: You'll receive 204pcs M8 screws, nuts and washers in total, which are 17pcs Phillips round head machine screws, 17pcs hex socket head cap screws, 17pcs hex head cap screw bolts, 51pcs hex nuts, 51pcs flat washers and 51pcs lock washers. This set with different types of screws and washers can be applied to various occasions, enough for your daily use..
➤[High Quality Material]: All of our screws, nuts, bolts and washers are made of 304 stainless steel, which features high strength, shiny look, premium rust, corrosion and oxidation resistance, can perform well even in bad environment. This 304 stainless steel set selects elaborately high quality fittings to give you best experience..
➤[Size Details]: Our round head machine screws, hex socket head cap screws and hexagon head bolts are in 4 different sizes: M8 x 15, M8 x 25, M8 x 35, M8 x 40, and come with M8 flat washers, M8 lock washers and M8 hex nuts. This set covers most commonly used size of M8 screws and bolts, will become good helper for you in repairing or replacing work..
➤[Great Workmanship]: These screws and bolts design with high precision, compact and clean thread to achieve tight connection, not easy to fall off and loosen, smooth thread are easy to install withou....
Glarks 320Pcs Stainless Steel Neoprene Backed EPDM Bonded Sealing Washers Assortment Kit Work for #4/ #5/ #6 Screws
♛『Excellent Quality』: These washers one side is 304 stainless steel, with high hardness, anti-corrosion and anti-rust.
the other side is Neoprene EPDM, which has the abilities of aging resistance, high and low temperature resistance, acid and alkali resistance, ozone resistance and ultraviolet resistance, they are beautiful and practical..
♛『Perfect Combination』: 304 stainless steel combined with EPDM, enhance the fastening effect as well as the function of sealing, provide a lasting seal against air and water, used to prevent leakage, distribute pressure of the bolt or screw, can avoid heat expansion and cold contraction while installing..
♛『Waterproof Washers』: These washers have superior corrosion resistance compared to regular steel washers, perfect used for near salt water, fresh water, wet environments and other wood related projects..
♛『Package Content』: In this set, It include 8 size of M4.2x12x50pcs, M4.8x14x50pcs, M5.5x16x50pcs, M5.5x19x30pcs, M5.5x25x30pcs, M6.3x16x30pcs, M6.3x19x50pcs, M6.3x25x30pcs total 320pcs sorted stored in a transparent box. enough quantity and durable quality for your use..
♛『Wide Application』: These sealing waterproof washers are slick, hard and thick, good for self drilling screws use, w....
