#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length
HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.
#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length
HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
√ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
√ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
[Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
√ [Come With A High Hardness Storage Box, Easy To Use And Stor....
#10 x 3-1/2 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 2 1/4 of Thread Length 10 Screw Diameter 3 1/2 Screw Length
HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
Size Number: #10 / Length of Screw is 3-1/2" inches with 2-1/4" inches of thread.
1/4-20 Brass Push in Threaded Insert 0.5\ Long (10 pcs)
The hand screw tap used to make new M6 threads or re-thread damaged and/or jammed threads..
Wire thread insert tool is a tool specially used when installing (or removing) wire thread inserts..
The set also includes 6pcs M6*1*1.5D and 6pcs M6*1*2D threaded insert screw made of 304 stainless steel for use..
They are widely widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
It is cheap and can satisfies your practice of tapping,screw insert installation and removal.For a beginner,they are a good combination..
TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs
Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.
6 Pieces Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set, 3 Pieces Center Gage, 1 America Type, 1 Metric America Type, 1 Metric Imperial US for Industrial Measurement
Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
It won't get rusted easily and owns long lasting durability.
Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
Thread pitch gauge function: can be applied to measure the pitch of the thread.
Center gauge function: apply to grind and position thread cutting tool on a lathe.
Advantage: accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
#12 x 4 Stainless Steel Wood Screw Square Drive Bugle Head Quantity 800 Type 17 Wood Cutting Point 2-3/4 of Thread Length 12 Screw Diameter 4 Screw Length
HIGH QUALITY STAINLESS STEEL: These #12 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #12 / Length of Screw is 4" inches with 2-3/4" inches of thread.
DZS Elec Light Bracket Adapter Converter 1/4'-3/8' Conversion Screw 3 in 1 Tripod Lamp Holder Kit Including 1/4' Female to 3/8' Male, 1/4' Male to 3/8' Male for Tripod, Camera
Package includes: 1 x 1/4" Female to 3/8" Male Screw + 1 x 1/4" Male to 3/8" Male Screw + 1 x 1/4" Female to 3/8" Female Nut.
The three piece conversion screw is used together. One side is 1/4" thread, and the other side is 3/8" thread. It can be used as a conversion screw, which can be screwed to the tripod to connect the camera, lightning guide, conversion base, and the bottom of hot shoes.
Some tripod on the screw mouth is small thread, can not directly use a more professional pan tilt, use this small conversion screw can operate freely 1/4" to 3/8".
Camera screw free conversion combination, for shooting more angles.
Made of stainless steel, durable and silver color.
#8 x 2-1/4 Stainless Steel Deck Screw Phillips Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 1-1/2 of Thread Length 8 Screw Diameter 2-1/4 Screw Length
HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Phillips drive.
Size Number: #8 / Length of Screw is 2-1/4" inches with 1-1/2" inches of thread.
