Best Screw Type Glass Hinges

DreamLine Unidoor Plus 60 in. W x 34 3/8 in. D x 72 in. H Frameless Hinged Shower Enclosure in Brushed Nickel, SHEN-24600340-04

  • Model Size: 60 in. W x 34 3/8 in. D x 72 in. H.
  • Configuration: Shower Door with Inline and Return panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Return Panel attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Return panel side.
  • 34-3/8 in. D x 60 in. W x 72 in. H Brushed Nickel finish. Door walk-in: 29 in. Panel(s): 30 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single hinged door, one stationary panel and one return panel.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges. Reversible for right/left door opening installation.
  • Wall studs or other reinforcement behind finished walls required for hinge installation. Professional installation recommended.
  • Shower base is not included. Limited lifetime manufacturer warranty. Warranty for any hardware in Oil Rubbed Bronze finish is limited to 1 (one) year.
Check Stock

DreamLine Unidoor Plus 33 1/2 - 34 in. W x 72 in. H Frameless Hinged Shower Door in Brushed Nickel, SHDR-243357210-04

  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 33-1/2 to 34 in. W x 72 in. H Brushed Nickel finish. Door walk-in: 26 in. Panel(s): 6-1/2 to 7 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges (5 degree offset). Frameless glass design.
  • Wall studs or other reinforcement behind finished walls required for hin....
Check Stock

DreamLine Unidoor Plus 58-58 1/2 in. W x 72 in. H Frameless Hinged Shower Door in Oil Rubbed Bronze, SHDR-245807210-06

  • Configuration: Shower Door and Inline Panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Inline attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Inline panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • Limited Lifetime Manufacturer Warranty. (Oil Rubbed Bronze and Satin Black finishes limited to 1 (one) year warranty).
  • 58 to 58-1/2 in. W x 72 in. H Oil Rubbed Bronze. Door walk-in: 27 in. Panel(s): 30 to 30-1/2 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single door, one panel. Reversible for right/left opening installation.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hi....
Check Stock

Boat Shortside Hinges,316 Stainless Steel Mirror Polished Marine Heavy Duty Hinges 1-1/2 Inch x 2-1/4 Inch,Pack of 2, Include Installation Screws

  • Materials:The boat shortside hinges are made of marine grade 316 stainless steel.maximum corrosion resistance and durability in the saltwater environment..
  • Application:Boat hardware hinges for interior hatch,locker,hatch windshield,deck hatch,compartment,doors and more..
  • High quality:Marine shortside hinges good construction, flexibility,Solid metal slab, very strong,mirror polished surface..
  • The size:Heavy duty hinges length:2-1/4 inch (57mm), width :1-1/2 inch (38mm),thickness: 3/16 inch (4.5mm).nstallation screw,it is very easy to install. Length:2-1/4 Inch (57mm), Width :1-1/2Inch (38mm),Thickness: 3/16 Inche (4.5mm)..
  • Easy to Install:Marine grade casting hatch hinge with installation screw,it is very easy to install..
Check Stock

Hickory Hardware P244-AC Surface Self-Closing Flush Hinge, Antique Copper

  • These h-type hinges are made of steel with applied antique copper finish..
  • Package contains one pair of hinges, mounting screws..
  • "H" type hinges can be used for cabinets, cupboards, boxes and other furniture..
  • It is perfect appliance for building or restoration projects required that type of hinges..
Check Stock

NeverBreak Parts - Igloo Cooler Replacement Parts - Large White Kit | High Strength Igloo Cooler Hinges Replacement with Latches | Ice Chest Repair Kit

  • DESIGNED TO FIT - Our Igloo cooler hinges and Latches are made to be an exact fit for most rectangular Igloo coolers and ice chests (25 - 165 qt models) hinge replaces Igloo part #24012, latch replaces Igloo part #24013 and included posts replace standard single screw latch posts. See images for exact size and hole spacing measurements. Skimp on other igloo cooler accessories but not on the cooler hardware, save yourself the aggravation and use parts that fit!.
  • MADE TO LAST - Heavy duty material is super strong and flexible and cannot be torn or broken even in extreme hot or cold settings making them the ideal Igloo cooler parts to be used in commercial or marine settings. These igloo cooler replacement parts are a final solution for your broken parts problems..
  • EASY INSTALL - This igloo ice chest repair kit includes all the required posts and stainless steel screws to quickly swap out your broken latches and hinges on standard and marine coolers. Simply remove your old screws and, posts, latches, hinges and discard, screw the new screws into the posts, latches and hinges so they are sticking through the back slightly, line up to holes, screw in and your Igloo coole....
Check Stock

POWERTEC QWS1005#8 x 3/4” Wood Screw Set, Phillips Flat Head Deep Thread Screws - 100 Pack

  • INCLUDES: #8 x 3/4 Deep Thread Wood Screws (100 pack).
  • FUNCTION: These flat heads are primarily used in applications where the head of the fastener must sit flush with the mating surface, connecting wood to wood, attaching hinges or as wood fasteners hardware for wood projects.
  • FEATURES: A short screw construction, with a fine deep cut Philips drive to help minimize bit slippage, stripping or damage to your screw.
  • PREMIUM: These deep thread wood screws are made with durable carbon steel, and finished with a smooth zinc plated coating for added corrosion protection.
  • SPECIFICATIONS: Diameter: #8 | Length: 3/4” | Head Style: Flat | Thread Type: Deep Coarse | Quantity: 100 pcs | Material: Carbon Steel | Finish: Zinc Plated.
Check Stock

Recoil WFH12-3 3 Pack Waterproof ATC/ATO Inline 12AWG Fuse Holder with 3pcs 15A & 3pcs 20A Fuses

  • 5x20mm Fuse Holder: 6pcs fuse holder inline screw type with 18 AWG wire, suitable for 5x20mm glass fuse..
  • 6x30mm Fuse Holder: 4pcs fuse holder inline screw type with 18 AWG wire, suitable for 6x30mm glass fuse..
  • Fuse Dimension:5x20mm/0.2x0.78in,6x30mm/0.23x1.18in,Fuse Voltage: 250V.
  • Fuse Model:5x20mm/10 kinds:0.2A 0.5A 1A 2A 3A 5A 8A 10A 12A 15A ,6x30mm/5 kinds:0.5A 1A 5A 10A 15A..
  • Package Quantity: 5x20mm Fuse Holder x 6pcs,6x30mm Fuse Holder x 4pcs,100pcs glass fuse(6x30mm Each model 10pcs,5x20mm Each model 10pcs),All glass fuses are packed in reusable boxes for easy management..
Check Stock

DreamLine Unidoor Plus 35 in. W x 34 3/8 in. D x 72 in. H Frameless Hinged Shower Enclosure in Chrome, SHEN-24350340-01

  • Configuration: Shower Door with Inline and Return panel.
  • Premium 3/8 in. (10mm) certified tempered glass.
  • DreamLine ClearMax water and stain resistant glass coating.
  • Reversible for a right or left door opening.
  • Solid brass wall-to-glass self-closing hinges.
  • Return Panel attached to the wall by a 1 in. anodized aluminum U-channel.
  • 1/2 in. width or out-of-plumb adjustment available on Return panel side.
  • Pictured SlimLine shower base is not included.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Wall studs or other reinforcement behind finished walls required for hinge installation.
  • 34-3/8 in. D x 35 in. W x 72 in. H Chrome finish hardware. Door walk-in: 28 in. Panel(s): 6 in. Finished walls are required for width measurement.
  • U-channel provides up to 1/2 in. width or out-of-plumb (vertical) adjustment. Single hinged door, one stationary panel and one return panel.
  • 3/8 in. (10mm) thick ANSI certified clear tempered glass. Solid brass self-closing hinges. Reversible for right/left door opening installation.
  • Wall studs or other reinforcement behind finished walls required for hinge ....
Check Stock

Toilet Seat Bolts Compatible with TOTO Expanding Rubber Top Toilet Seat Hinges Screws Replacement Fixings Nuts Screws Mount Seat Hardware Toilet Repair Screw Toilet Seat Replacement Parts Kit

  • 【Universal Application】Fix expanding rubber top nuts screw set blind hole with two expandable ball is great for broken or old toilet seat hinges. Fits for Toto toilets and most standard toilet seats with top fix hinge..
  • 【Rubber Bungs】The toilet seat mounting bolts have a threaded section so you can just push them into the holes in the top of the toilet pan and when you tighten the screw it expands and tightens itself into the hole, without the need of a bolt on the other end of the screw..
  • 【Top Quality Toilet Bolts】Toilet seat screw replacement parts kit is with rubber bungs and stainless steel screw, ensuring long time use. Hinge blind hole fittings with two expandable ball are suitable for most American standard toilets..
  • 【Package includes】Toilet seat hinge bolts and nuts includes: 2 pieces of 2.52inches (6.4cm) black expanding rubber, 2 pieces of 2.99 inches (7.6cm)length bolts, 2 pieces of 0.75 inch (1.9cm) stainless steel gasket and 2 pieces of 0.6 inch (1.5cm) rubber washer..
  • 【Top Tightening Seat Mounting Bolts】Toilet seat hinges replacement parts is great for broken or old toilet seat hinges. Toilet seat nut are very easy to fit done in a matter of minutes, simply remove old bolts clean around the area and fit the new bolts..
Check Stock