Xbox Controller Wall Mount & Headphone Holder Hanger Bracket. This is not a generic bracket, this is a specific bracket designed for the best flush fit. Three piece kit that is easy to assemble, simply screw the headphone hanger extension to the bottom of the hanger with the adjoining self-tapping screws, line the hanger and the controller holder holes up and use the single screw to join the two and mount it to the wall (fixes to the wall with one screw)..
Ultra-low-profile design unlike others, this prevents the device from sticking out from the wall. Fixes to the wall with only one screw and raw plug (if needed), all supplied with the bracket. Great for managing your setup and keeping it tidy. Never loose your controller & headphones again!.
Designed for even the biggest gaming headsets on the market. Keep surface space clutter free! Cables can be wound around the holder for extra management. Can be fixed to walls, units, desks, beds, tables and more. Made of tough durable PETG. Various colours available..
Note raw plugs do not have to be used depending on the circumstances. Note we also do various other wall mounts for this accessory and its device so be sure to check out our seller profile. Bracket and Fixings ONLY, Xbox Controller NOT Included..
Hosanwell Mac Mini Mount | Custom Mount for The Mac Mini, VESA Compatible, Wall Mount, Under Desk, Multiple Installation Ways
...f the mount won’t affect signal transmission. ●The design of the Mac Mini Mount does not block the vent of the Mac Mini itself. At the same time, most surface of the machine is exposed for heat dissipation and hence reduce heat of the host..
【Package content】 ●Main Body*1 ●Wall Mount*1 ●Side Mount*2 ●Screw Dowel*4 ●Screw A*4, B*8, C*4, D*4 ●Velcro Magic Tapes*2 ●Manual*1 ●If you have any problem, please feel free to contact us. Hosanwell provides both online help within 48 hours and 12 month warranty.
Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes
☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)
Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Universal 3-in-1 Tri-Hot Shoe Mount Flash Bracket Holder with 2 Umbrella Hole for Light Stand Camera Tripod Reflective Umbrella Studio Flash Soft Box Speedlite Diffuser
1. The flash bracket is made of metal material, surface antioxidant treatment.
hot shoe mount is made of aluminium alloy, stainless steel spring, very solid.
2. Three hot shoes can be adjusted independently within the rang of 15.5mm to 18.5mm, compatible with standard cold foot flashes of Canon, Nikon, Pentax, Ricoh, Olympus, Panasonic and so on.
3. The flash holder can be removed from the tri-hot shoe mount.
the top of the holder with 1/4" screw hole which can be connected with 1/4"screw and extended to other use.
the flash holder uses gear meshing, can tilt from left to right within 180°.
locked by screw, easy to use together with spanner.
4. The tri-hot shoe mount has a built-in lateral umbrella hole locked by push bar and reed, suitable for umbrella shaft of diameter less than 10mm.
5. The umbrella holder has a vertical umbrella hole, suitable for umbrella shaft of diameter less than 10mm.
with a 18mm hole in the bottom, if used with 1/4" to 3/8" adapter screw, can be used with all kinds of light stands and tripods, including light stands with 15.8mm diameter head, and tripods or monopods with 1/4" or 3/8" screw head..
CAMOLO Metal Phone Tripod Mount 2 in 1 Cell Phone Tripod Mount with Cold Shoe Joint Mount Phone Holder for GoPro Mount Tripod Monopod Selfie Stick for iPhone Samsung Android Microphone LED Light
【2-in-1 Design】There are two ways to use our phone tripod adapter mount. You can use it on various shooting equipment as needed. First, with a universal Joint mount, can be used for Gopro adapter etc.Second, use the matching small wrench to unscrew the bottom screw, you can get a 1/4'' interface smartphone tripod adapter which can be used with a tripod, selfie stick etc..
【Non-slip & Safe & Sturdy】The metal smartphone tripod mount adopts anti slip rubber at both ends, which can effectively hold the mobile phone while being non-slip, which better protects your equipment from damage and is safer. It is made of all metal, strong and durable.
【Two 1/4" Screw Holes】There is a standard 1/4'' threaded screw on the bottom and back of the smartphone tripod adapter. Can be connected to various equipment with 1/4'' screw, such as: tripod, monopod and other peripheral expansion equipment, such as: magic arm etc..
【Cold Shoe & Limit Design】The cell phone tripod mount with cold shoe, you can install other equipment with a cold shoe port such as microphones and LED lights. At the same time, we adopt a limit design, and the mini limit point can ensure that you will not easily slide out when expanding the devices.
ARISLL Accessories kit for DJI OSMO Pocket/Pocket 2, Handheld Mount Adapter Tripod Carrying Case Expansion Phone Bracket Screen Protector for Osmo Pocket/Pocket 2
For Dji Osmo Pocket/Pocket 2 ,includes a handheld phone holder, a chest harness with adapter, a back pack clip,2 tempered glass screen protector, a tripod and adapter, an extendable monopod with adapter, 1/4’ screws ,a carry case, an expansion bracket, a J hook,a wrench,a base mount..
Carrying Case+Tempered Glass Film: The EVA durable case made for OSMO pocket also fits for its accessories like the wireless module, accessory mount, controller wheel. The tempered glass protector is made to protect the OSMO pocket lens..
Tripod+Extension Monopod+ Phone Holder:Mount your OSMO Pocket along with your mobile together and you can extend the monopod, portable kit for Vlog..
Backpack Clip+Extension Bracket+Screw：Mount your OSMO Pocket to the backpack and shoot on the go..
Chest Harness+J Hook+ Extension Bracket+Screw：Mount your OSMO Pocket to the chest harness and shoot on the go..
Toptekits 2 Port USB 3.0 A Female Screw Panel Mount to Motherboard 20 Pin Flat Cable Cord by Toptekits, 1.6ft/0.5m
Toptekits Dual Port USB 3.0 Female Screw Mount Panel Type to Motherboard 20 Pin Flat Cable 1.6ft/50cm.
Dual Port USB 3.0 Female Screw Mount Panel Type to Motherboard 20 Pin Flat Cable, You can use USB 3.0 type-A female convert USB3.0 (20pin Header) directly connected to the motherboard.
USB 3.0 port x 2 switch to USB 3.0 20 pin cable.
The usb 3.0 A female connector can screw at the Panel.there are screw Mount holes at USB 3.0 Female end. Length: 50cm/1.6ft.
Flat slim Black color cable, Package Included: 1 x 50cm/1.6ft Cable.
