Best Seamles Stainless Pipe

PVC Termination Cap Mesh Screen Vent Cover Furnace & Roof Vent Cap Stainless Steel Wire Round Exhaust Pipe Cover End 3 Inner & 3.5 Outer Diameter

  • ATTENTION: Please Read: the inner diameter measures 3" inch and the outer diameter measures 3.5" inch, therefore any pipe connected with mesh pipe....
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent....
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or....
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves,....
  • AIRFLOW: PVC pipe cover works as pipe screens with stainless steel mesh screen cap that allows maximum airflow for the furnace work through the mesh....
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

Exhaust Stamped Y Pipe 3.00 Diameter Single Inlet to 3.00 Diameter Dual Outlets Stainless Steel WSYP300-300SS Wesdon Exhaust Stamped Y Pipe

  • Stamped HEAVY 16 GAUGE Stainless Steel 3.00 DIA SINGLE INLET DUAL 3.00 OUTLETS BY OAL 10.00 INCH LENGTH Y PIPE.
  • Add an “Y” pipe to Create dual exhausts to help Exhaust Faster and Better tone Reduces Interior Resonance Compact design for Ease of Installation....
  • Stainless Steel (Please measure to make sure it fits your Truck) Fits a 3.00 Exhaust Pipe.
Check Stock

Eyourlife 2 PCS Stainless Steel Ceiling Pipe Bracket, Wall Mount Ceiling Pipe Support, Adjustable Pipe Support Clamp Pipe Straps with Screws, Fit for Dia 32mm 1 inch Pipe

  • 【DURABLE MATERIAL】: Made of polished 304 Stainless Steel, resist high temperature and rust, has strong force, due to smooth edges, it won’t damage the pipe..
  • 【ADJUSTABLE】: The height of bracket is adjustable, ranges from 50mm to 100mm, meeting different need.There has thread on the surface of bolt so that it is convenient to tighten the bolt by hand without additional tools..
  • 【EASY TO USE】: It can be installed with screws, pipe support with base is easier for using, improving efficiency..
  • 【APPLICABLE】: It is mainly used for pipe support, pipe fixing, rod support, can be mounted on the wall or ceiling.The bracket is suitable for pipes or rods with a diameter of 32mm-34mm (1 inch)..
  • 【WHAT YOU GET】: 2 pcs Stainless Steel Pipe Support 6pcs Screws and Anchors. Please measure the diameter of pipe before purchasing. If there are any problems, please feel free to contact us..
Check Stock

Yannabis Tobacco Pipes, Handmade Carved Smoking Pipe with Accessories(Scraper, Filter Element, Filter Ball, Pipe Tip Grips, Box, Bag)

  • UNIQUE PATTERN DESIGN: Handcrafted of natural wood (Red Wood), the pipe Weight approximately 0.2pound and designed with flat bottom, no need for pipe stand and itself can stand well, elegantly perform on your desk..
  • HEALTHY & ENJOYABLE: Comes with 3pcs 9mm filter elements for a healthier smoking experience and 3pcs filter balls to enable good air flow through the tobacco for a full taste..
  • INCLUDING PIPE CLEANING ACCESSORIES: The smoking pipe can free disassemble, cleaning is very convenient, and there are pipe cleaners and stainless steel 3-in-1 pipe scraper, for easy cleaning after smoking..
  • YOU WILL GET: 1 x Smoking Pipe, 1 x 3-in-1 Pipe Scraper, 6 x Pipe Cleaners, 3 x Pipe Filters, 3 x Pipe Bits, 3 x Metal Balls, 1 x Pipe Pouch with Gift Box(Random)..
  • GREAT GIFT IDEA FOR SMOKER LOVERS: Perfect to be as a gift for Father's Day, Christmas Day, Thanksgiving Day, Teacher's Day and all smoking lovers..
Check Stock

Eyourlife 2 PCS Stainless Steel Ceiling Pipe Bracket, Wall Mount Ceiling Pipe Support, Adjustable Pipe Support Clamp Pipe Straps with Screws, Fit for Dia 25mm 3/4 inch Pipe

  • 【DURABLE MATERIAL】: Made of polished 304 Stainless Steel, resist high temperature and rust, has strong force, due to smooth edges, it won’t damage the pipe..
  • 【ADJUSTABLE】: The height of bracket is adjustable, ranges from 50mm to 100mm, meeting different need.There has thread on the surface of bolt so that it is convenient to tighten the bolt by hand without additional tools..
  • 【EASY TO USE】: It can be installed with screws, pipe support with base is easier for using, improving efficiency..
  • 【APPLICABLE】: It is mainly used for pipe support, pipe fixing, rod support, can be mounted on the wall or ceiling.The bracket is suitable for pipes or rods with a diameter of 25mm-27mm (3/4 inch)..
  • 【WHAT YOU GET】: 2 pcs Stainless Steel Pipe Support 6pcs Screws and Anchors. Please measure the diameter of pipe before purchasing. If there are any problems, please feel free to contact us..
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Pipe Cutter, Tubing Cutter Tool 1/8\ to 1-1/8\ Outer Diameter, Copper Pipe Cutter, Mini Tube Cutter for Thin Metal and PVC Pipe, Pipe Cutter Tool for Copper, Aluminum, Thin Stainless Steel Pipe

  • High hardness blade: The blade of this pipe cutter is made of high-strength manganese steel, which can cut metal thin tubes, and it is equipped with a standby blade..
  • Wide Application:The copper pipe cutter can be used to cut copper pipe, aluminum pipe,galvanized pipe,corrugated tube,PVC and thin stainless steel tube..
  • Reasonable Design:The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • Sturdy and durable:The metal cutter tool is made of stainless steel except for the rotating handle made of plastic to ensure its durability..
  • Including deburring tools:There is a deburring tool attached with the pipe cutter tool, made of sturdy steel. It can deliver quick, clean and easy inside diameter reaming of different tubes..
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

112pcs Hose Clamps Stainless Steel,Stainless Steel Clamps,Hose Clamp Assortment Kit,Adjustable Worm Gear Heavy Duty Pipe Clamps

  • Stainless Steel Material: All fittings on the hose clamp are made of 304 stainless steel, which is sturdy and durable, with good acid and corrosion resistance. You can safely use pipe clamp to fix outdoor pipes without worrying about rusting and cracking.
  • Adjustable Design: All hose clamps stainless steel can be adjusted by screws according to the diameter of the pipe, so that the pipe can be fixed more firmly..
  • Tightly Bound: The tube clamp is very flexible and can be tightly tied to the pipe without loosening, thus preventing liquid leakage.
  • 8 Specifications: There are 112pcs o clamps, including 8 size specifications. Their adjustable range is 24 pieces of 8-12mm, 18 pieces of 10-16mm, 18 pieces of 13-19mm, 12 pieces of 16-25mm, 10 pieces of 18-32mm, 10 pieces of 19-29mm, 10 pieces of 21-38mm and 10 pieces of 21-44mm. Comprehensive size specifications to meet your various needs.
  • Wide Application: The hose clamp kit has a very wide range of applications, and can be used to fix hoses, pipes, cables, pipes, fuel pipes, etc..
Check Stock