Best Self tapping Screw Set

Delisert Self Tapping Threaded Insert Type 307 Carbon Steel m12x1.75x12mm 100PCS

  • High quality 303 stainless steel ,wear-resistant and long service life..
  • Stainless steel material is mainly suitable for high-strength products such as cast iron.Carbon steel galvanized material is mainly suitable for aluminum alloy,copper,plastic and other low-strength base materials..
  • These self -tapping thread inserts has self-tapping ability,does not need to be pre-tapped,can be directly used by the installation tool to screw it into a specific hole..
  • Scope of application:widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
  • All the small parts are packed in a transparent plastic box with compartments, which is convenient to carry, store or reuse as a backup kit..
Check Stock

Assortment Screw Covers Screw Caps Kit, Include 300 PCS Plastic Screw Cap Covers and 870 PCS Self Adhesive Screw Hole Stickers, Waterproof Self-Tapping Screw Hole Covers Caps for Furniture Wood Screw

  • 870 Pieces Stickers: 9 sheets of Self-adhesive Screw Hole Stickers with 3 sizes in 3 colors, 12 mm/ 0.47 inch, 15 mm/ 0.59 inch, 21 mm/ 0.83 inch, White, Black, Grey. Sufficient quantity to meet your daily use and replacement needs..
  • 300 Pieces Covers: 300 screw caps in 3 colors, White, Black, Grey, 100 covers per color. Measure approx. 12 mm/ 0.47 inch in diameter, suitable for 4 mm/ 0.16 inch self-tapping screw heads..
  • Easy To Use: These furniture screw cover stickers are easy to use with the self adhesive design. Just peel from the backing sheet and paste on the holes that need to be covered.
  • Then screw covers, are easily install them in place with a screw tool, save your time and effort..
  • Sturdy & Pretty: screw hole stickers are made of high-quality PVC plastic, safe and flexible, not easy to deform.
  • screw cover caps will provide well protection for your screws and avoid rust, make your furniture look pretty in visual after installation..
  • Wide Application: widely suitable for wooden furniture, cabinet nail group, mirror decorations, table caps, table holes, bookcase, well cover screw holes and installation holes..
Check Stock

410 Stainless Steel #8 Self Drilling TEK Screw Assortment Kit, Hex Washer Head & Modified Truss Head, VIGRUE 370PCS Self Tapping Sheet Metal Screws, Length 1/2\ to 1-1/4\

  • ✔Screw Type: #8 Self Tapping Drilling Metal Screws Assortment Kit.(#8 for 3mm carbon steel sheet to avoid breaking off. Min Breaking Torque-2.8N.M).
  • ✔Sizes: #8 x 1/2'', #8 x 5/8'', #8 x 3/4'', #8 x 1'', #8 x 1-1/4'' Self Drilling Screws(Each Head)..
  • ✔Head Type: Hex Washer/Modified Truss Head.
  • ✔Made of 100% 410 Stainless Steel and with Black Oxide coating, giving the screws an excellent corrosion and abrasion resistance..
  • ✔Self Drilling Screws (sometimes called self-tapping screws) are perfect for use in sheet metal steel, aluminum, wood, plastics, and other similar materials, self-drilling makes pre-drilling unnecessary..
Check Stock

Suptek Universal TV Mounting Hardware Kit Set Includes TV Screws and Anchors M4 M5 M6 M8 TV Screws and Spacer Fit Most TVs up to 80 inch

  • TV mount hardware – universal for any TV brands and TV wall mount on the market up to 80”.
  • Wall mount screw set includes M4, M5, M6, M8 TV Screws, Washers & Spacers, self-tapping screw, concrete anchor.
  • The package is organized and labeled for hassle-free mounting.
  • Quality hardware – included screws, washers and spacers are made from top quality steel.
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ...ding Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
  • ➤[Tap and Die Sizes]: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
Check Stock

Sealmaster SEHB-31C Eccentric Drive Type Hanger Bearing, Setscrew Locking Collar, Contact Seals, 1-15/16\ Bore, 13/16\ Thread Length

  • Straight pipe thread tapped housing with self-aligning ball bearing insert for shaft misalignment adjustment.
  • Set screw locking collar for secure attachment to shaft.
  • Cast iron housing for strength and durability.
Check Stock

LIONMAX Wood Screws #8 x 2 Inch, Pocket Hole Screws 300PCS with Coarse Thread, Washer Head Square Drive, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

  • 【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
  • 【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
  • 【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
  • 【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
  • 【Package】: #8 x 2 Inch Pocket Hole Screws 300 Pieces, 150MM Square Drive Bit Included..
Check Stock

Rustark 180Pcs [#8 3/8 to 1-1/2 ] 304 Stainless Steel Countersunk Flat Head Phillips Cross Wood Screws Drive Self Tapping Drilling Screw Assortment Kit

  • ... of high-quality 304 stainless steel, corrosion-resistant, rust-proof, high strength, no deformation, you can use it for a long time, meanwhile, the material are environmentally friendly, non-toxic and pollution-free, the hardness twice as high as copper..
  • ☆【MULTI PURPOSE】--- Countersunk flat head self tapping screws are commonly used in electrical equipment, mechanical equipment, household appliances, digital products, renovation construction, etc. self-tapping screws are pointed, it can be used on the material to be fixed, by its own thread, the solid body will be tapped to the corresponding thread to make them closely match each other..
  • ☆【CROSS FLAT HEAD】--- Standard cross recess, even force is not easy to slip, 45 degrees can not remove the screw, it is more convenient to use, the surface is smooth, the cross groove deep tunnel, easy to tighten..
  • ☆【WORRY-FREE PURCHASE】--- We will provide you with reliable after-sales service. If you have any questions with our product, please feel free to contact us, I will reply you within 12 hours and we will solve them for you soon. Please set your heart at rest to purchase..
Check Stock

410 Stainless Steel #8#10 Self Tapping Screws for Metal, 380 PCS Self Drilling Screws Assortment Kit, Black Oxide, Modified Truss Head Self Tapping Sheet Metal TEK Screws, Length 1/2" to 1-1/4''

  • 【Head Type】: #8, #10 standard truss head self drilling screws assortment kit. Drive type: Phillips..
  • 【Screw Sizes】: #8 x 1/2'', #8 x 5/8'', #8 x 3/4'', #8 x 1'', #8 x 1-1/4'', #10 x 1/2'', #10 x 5/8'', #10 x 3/4'', #10 x 1'', #10 x 1-1/4'', 380 pcs black self tapping screws, various sizes to meet your all needs..
  • 【High Quality】: These self drilling screws for metal are 100% made of 410 stainless steel and with black oxide coating, waterproof and anti-rust, which are famous for excellent corrosion resistance and abrasion resistance..
  • 【Widely Application】: Self-tapping screws do not require pre-drilling, speeding up the fastening process for many applications, and are widely used in sheet metal, rigid frames, furniture, trailer track, gutter guards, can effectively hold metal, plywood, and brick together..
  • 【Convenient Label Box】: Nice thickened plastic box with individual compartments to keep everything organized, and both sides of the lid have a detailed screw size....
Check Stock

50Pcs Quick Thread Insert with Storage Case M3 M12 Self Tapping Thread Insert Stainless Steel Inner Thread Self Tapping Thread Inserts Set Thread Reinforce Repair Tool

  • 【Easy to Install】These self-tapping thread inserts has self-tapping ability, does not need to be pre-tapped, can be directly used by the installation tool to screw it into a specific hole..
  • 【Sturdy & Wear-resistance】These threaded inserts have a good connection performance, can enhance connection strength and improve connection condition. Good wear-resistance, can be used for parts that requires frequent removing,It is widely used in automobile industry, rail car industry, ship industry, household appliances and many other places..
  • 【You Can Get】Silver, total 50Pcs. 10 x M3*0.5-M5*0.5 L6, 10 x M4*0.7-M6.5*0.75 L8, 10 x M5*0.8-M8*1.0 L10, 5 x M6*1.0-M10*1.5 L14, 5 x M8*1.25-M12*1.5 L15, 5 x M10*1.5-M14*1.5 L18, 5 x M12*1.75-M16*1.5 L22. 1 x Storage Case with different compartments for easy storage..
  • 【Help to Maintenance】A damaged screw hole can be used as normal after installed a thread insert, save money..
  • 【Safety】It has the ability of strong vibration resistance, which can prevent loose.Can be used in many different places..
Check Stock