700-506 Gas Valve, Fast Opening, 200000 BTU\\/H, Combination Gas Valve, Widely used in natural, manufactured, mixed, LPG and LPG\\/air mixtures
The 700-506 series gas valve is designed for intermittent pilot, direct spark and hot surface applications.Small size, large flow，Contains a manual valve, pilot valve and a main air pressure regulator..
Just make sure the valve you use has the btu rating range within 5% of the original. Also some are labeled at different water column but as long as it is very close range the 700-506 gas valve will work..
Compatible with various gas types: natural, manufactured, blends, LPG and LPG/air mixtures..
The 700-506 thermostat gas valve is suitable for many residential and commercial places, and is widely used in wall-mounted heaters, boilers, portable domestic stoves and central heating equipment..
Thank you for purchasing our products, we provide the best service while providing quality products, if you have any questions, please feel free to contact us and give us valuable suggestions..
Three kinds of valve stem extension（45 degree, 90 degree and 135 degree）successfully solved a series of operations such as inability to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existin....
▲[Fitment] - Titanium VTEC Eliminator Pin Fit for Honda D Series D16 D16z6 D16y8.
▲[Sturdy & Durable Material] -100% brand new accessories, titanium alloy material, lighter than ordinary ones, and more stable in performance..
▲[Excellent Function] - The weight of the valve mechanism is reduced, which helps maintain proper valve movement, and reduces the chance of valve floating with a high RPM usage rate, and eliminates noise.
▲[Packing Included] - 4 * Titanium VTEC Eliminator Pin ( as shown in the picture ).
▲[Service Guarantee] -If you have any questions about our Titanium VTEC Eliminator Pin, Please contact our friendly, helpful, and knowledgeable customer service representatives, we will be glad to address any questions or concerns promptly..
4 Pcs Valve Stem Extenders 8 / 12 Inch Stainless Steel Braided Flexible Dually Valve Stem Extensions with 6 Pcs 45 90 135 Degree Schrader Tire Valve Extension for Most Cars Truck Motorcycle
...n still be used for a long time. It can keep the light, and the surface and edges have been carefully polished, so you don't have to worry about scratching your hands when using it..
Three Angle of Valve Extension Elbows: 45 degrees, 90 degrees, and 135 degrees. Tire valve extension elbows have successfully solved a series of problems such as insufficient valve and spoke gaps, such as inability to pump air or check air pressure, or inconvenient valve position angles. It can be inflated and deflated easily and quickly. Be sure to tighten the thread when using, otherwise the best sealing effect will not be achieved..
Easy to Used: This valve stem extender kit is very convenient to use, just screw the metal valve stem extension to the tire valve, then connect the hose to the tire air intake through the valve stem extension, you can easily inflate the tire. It is very convenient to use..
Suitable for Most Situations: These valve stem extenders are suitable for most bicycles, motorcycles, automobiles, trailers and recreational vehicles with standard American tire valves, providing convenience for your life and making your inflation process more convenient..
... be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
STREAMLINED INSTALLATION: Features an integrated mounting bracket that secures the valve directly to a brace, streamlining the installation process and saving time.
BUILT TO LAST: Backed by Moen’s Limited Lifetime Warranty.
Moen UTS2611 Doux Collection M-CORE 3-Series 2-Handle Shower Trim with Integrated Transfer, Valve Required, Chrome
VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating style.
VALVE REQUIRED: This trim kit requires M-CORE Mixing Valve with Integrated Transfer Valve U232 or U362, with preferred installation option, to complete installation.
FOR USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Watts A2C-M1 IntelliFlow Automatic Washing Machine Water Shutoff Valves with Leak Sensor White
WATTS WASHER WATER SHUTOFF VALVES: Protects against potential residential water damage due to a burst inlet hose connected to a washing machine -....
AUTOMATIC WATER SHUTOFF VALVE: Automatic water leak shutoff valve A2C-M is equipped with a state of the art electric current sensing device. When the....
EASY TO INSTALL: It is easy to install and has silent reliable operation..
BEST SELLING WASHING MACHINE WATER SHUTOFF VALVE: It consists of an electrical three-prong outlet to receive a washing machine power cable, leak....
WASHING MACHINE HOT WATER SHUTOFF VALVE WITH LEAK SENSOR: If the Series A2C detects a leak, current flow to both the hot and cold water valves are....
Moen UT3290BN Align M-CORE 3-Series 2-Handle Shower Trim with Integrated Transfer, Valve Required, Brushed Nickel
... be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
STREAMLINED INSTALLATION: Features an integrated mounting bracket that secures the valve directly to a brace, streamlining the installation process and saving time.
BUILT TO LAST: Backed by Moen’s Limited Lifetime Warranty.
Pressure Washer Pump Replacement, 7/8'' Shaft Vertical Pressure Washer Pump, Power Washer Pumps Replacement, 2400-2800PSI Pumps Replacement for Pump Pressure Power Washer
· Pressure Washer Pump - 2800psi, Max 2.5 GPM RATING, Fits 7/8" Shaft Vertical Axial Gasoline Engines in 4-7 HP - Such as some models of Troybilt, Ryobi, Generac, Briggs & Stratton,Devilbiss/Excell,Craftsman,Husky,Honda. Not fit all model series. Very Important - This pump is a heavy item. In order to save each other’s time and money, Please check the pump shaft size 7/8’’, the pump housing and mounting size, and the pressure power fit your machine or not before you place the order..
· Vertical Power Pressure Pumps COMPATIBILITY - 2400-2800psi,4-7 HP Max.#PowerStroke:PS262311,PS80944,PS80946#Excell:VR2522,VR2500,#Craftsman:580series#Ryobi:RY802700,RY8C2700,RY802700A,etc #Husky: HU80 series #Homelite UT80709 series.It can fit other type models. This pump not fit all series models, pls check your pressure washer’s mounting size, pressure power and shaft size before you buy. If you are not sure if your pressure washer would fit, please contact ' Amazon Customer Service'..
· Pressure Washer Pump Parts - Comes with Easy start valve (EZ), Thermal relief valve, Unloader & SAE gas engine flange, M22 outlet, Copper Nut 3/4 NH inlet, Keyway Stock..
· Universal Pressure Washer Pump Replacement✦This pump is a universal pressure washer pump replac....
RuggedMade 25 GPM Hydraulic Log Splitter Directional Control Valve, Auto Return Detent Lever Handle, 2750 PSI (1/2\ Work Ports)
SPECIFICATIONS: This 2 spool valve from Chief’s G Series is a directional control valve with a joystick, 2 spool spring to neutral tandem center, 10 GPM flow rate, SAE 8 work, and SAE 10 inlet/outlet ports. Its maximum working pressure is 3625 PSI..
HIGH UTILITY: Our hydraulic valve 2 spool has wide-ranging utility since it can be effortlessly shifted in 3 different positions, providing increased directional control of the actuators. The 3 pos setup also reduces heat buildup..
CONSISTENT: The log splitter valve has a spring to neutral tandem center and is therefore consistent, making it a great support for fixed-volume pumps. It is not only economical but also low maintenance..
MADE TO LAST: With an alloy steel body, this directional control 4-way valve is highly corrosion resistant and withstands even melting temperatures. It is extremely ductile and can outlast other similar products available in the market..
EASE OF USE: With a joystick control in tow, our hydraulic joystick valve offers a single push-pull and up-down control on all valves. It cuts down the force feedback from the system to the operator..
