Best Servo Arduino Nano

Servo Driver HAT 16-Channel 12-bit I2C Interface PWM Outputs for Jetson Nano Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B Supports SG90 MG90S MG996R etc @XYGStudy

  • Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface.
  • Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to....
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later version, Jetson Nano.
  • I2C controlled, using only 2 pins Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Check Stock

Aoicrie 5pcs PCA9685 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit, for Robot or for Raspberry pi Shield Module servo Shield

  • It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)..
  • Communication Interface: IIC, PCA9685 contain an I2C-controlled PWM driver with a built-in clock..
  • 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs..
  • 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate..
  • 16 Channel PWM/Servo Driver IIC interface-PCA9685 for arduino or for Raspberry pi shield module servo shield..
Check Stock

12PCS SG90 Micro Servo Motor, Dorhea Mini Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control Compatible with Ardu ino

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Support Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock

ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE

  • Free PDF tutorial(more than 22 lessons) and clear listing in a nice package.
  • The most economical kit based on Arduino platform to starting programming for those beginners who are interested..
  • Lcd1602 module with pin header (not need to be soldered by yourself).
  • This is the upgraded starter kits with power supply module, 9V battery with dc.
  • High quality kit with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO..
Check Stock

Jackson X Series Soloist SL3X DX Electric Guitar - Absynthe Frost with Laurel Fingerboard

  • Free PDF tutorial(more than 22 lessons) and clear listing in a nice package.
  • The most economical kit based on Arduino platform to starting learning electronics for those beginners who are interested..
  • Lcd1602 module with pin header (not need to be soldered by yourself).
  • This is the upgraded starter kits with power supply module, 9V battery with dc.
  • High quality kit with UNO board, compatible with Arduino UNO R3, MEGA 2560 R3, NANO..
Check Stock

2Pack SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of RC Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 0.01 sec/60(4.8V ) 0.08 0.01 sec/60(6V). Maximum angle: 120.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Support for Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock

8 String Guitar and Bass TABS Tablature Notebook: 110 Pages of 8-String Guitar Tab Manuscript Paper (Manuscript Paper for 8 String) or Guitarron

  • This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
  • It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
  • Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
  • Packed well in nice box, also each item packed well separately..
  • High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..
Check Stock

Ingcool 2.9inch e-Ink Display Module, 296x128 Resolution Two-Color e-Paper Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo,SPI Interface Support Partial Refresh

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh..
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on..
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing.
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc..Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock

Weewooday 6 Pieces Nano Board V3.0 ATmega328P Without Cable Compatible with Arduino Nano V3.0 with Pin Headers Pin Unsoldered

  • What you will get: the package included 6 pieces of nano board V3.0 ATmega328P, each nano V3.0 ATMEGA328P improved version with 3 pieces of pin headers unsoldered.
  • ATmega328P chips: using Atmega328P-AU MCU, support ISP download, using the same chips ATmega328P and CH340 with the official version.
  • Mini nano board: this is a portable, complete, and breadboard friendly board.
  • It has everything that compatible with Arduino has (electrically) with more analog input pins and onboard +5V AREF jumper.
  • Input and output: each of the 14 digital pins on the Nano can be applied as an input or output.
  • USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • The power source is automatically selected to the high voltage source.
Check Stock

MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Each of Them 1pcs Total 9pcs Sensor for arduino kit

  • This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
  • It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
  • Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
  • Packed well in nice box, also each item packed well separately..
  • High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..
Check Stock