Best Servo Motor Steel Gear Sets

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.

【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.

25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.

Powder coated 3mm steel ladder frame, 4-Link suspension, Aluminum capped oil filled shocks, Functional 1.9 beadlock wheels, Lockout spool axle carriers, Aluminum wheel hexes, Ball bearings throughout..
Adjustable wheel base (317mm - 325mm), Multiple shock positions, Adjustable approach and departure angle, Tunable suspension..
Licensed Interco Super Swamper Tires, Scale body, Shackle mount bumpers (LED ready).
550 brushed motor, Waterproof crawler ESC with 3 selectable brake modes, Hexfly metal gear steering servo, 2.4GHz radio system..
Assembled & Ready to Run - Includes 7.2V 2000mAh NiMH Battery, & NiMH Charger - Requires 4-AA Batteries for Transmitter..

2.4GHz 2-channel radio W/ dvc (dynamic vehicle control) receiver.
High-torque, Metal-gear Reedy servo with spring style servo saver.
Water-resistant high-power Reedy Brushless speed control with T-plug connector and LiPo low voltage cutoff.
Realistic method wheels with 12mm front and rear hex-drive nuts.

High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..

Fits for RC Robot, Helicopter, Drone, Car, Boat.
Operating Speed (4.8V no load): 0.1sec/60 degrees.
Stall torque: 1.2kg / 1.4kg/cm(4.8V). operating voltage: 4.8V-6V.
Packaged Included:( 1 x SG90 Gear Micro Servo, 1 x roker arm, 1 x screw)*1pc/ 2 pcs/ 4pcs.

Coaxial cable processed wire diameter 0.1-6.99mm2.
Suitable for different types of semi-flexible coaxial cable, charging cable, medical communication and medical industry medical wire processing.
Max. 9 layers of peel and 99 sets of memory function.
Adopt Servo motor ,tungsten steel blades.

【Metal Gear Coreless Servo】Equipped with strong copper & Stainless Steel Gears, CNC aluminium Shell, Less Noise, light weight..
【Waterproof Servo】Waterproof performance: IP67 (Please watch the waterproof test video). Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
【Widely Use Digital Servo】The steering servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
【High Speed Servo Standard Size】1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..