Best Servo Motor Voltage

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

2 Pieces MG90S 9g Micro Servo RC Servos for Planes MG90S Digital Servo Aluminum Alloy SG90 Micro Servos Metal Gear for Smart Robot Car Helicopter Plane Boat Vehicle Models

  • Package includes: the package 2 pieces of mini servo metal gears with model MG90S, which can replace SG90 for better noise suppression and durability.
  • Detailed size: the servo motor 9g has a size of 22.8 x 12.2 x 28.5 mm/ 0.9 x 0.5 x 1.1 inch, a weight of 13.6g, an operating torque of 2.0KG/ cm, a....
  • Wiring: dark gray: GND, red: VCC 4.8-7.2V, orange: pulse input, interface type: JR/FUTABA general.
  • You can give this digital servo motor to your....
  • Robust structure: the metal micro servo is composed of aluminum metal teeth, coreless motors, and double ball bearings, which is strong, reliable and....
  • Wide application: the metal gear servo micro can be compatible with 450 E-sky, swashplate steering gear, fixed wing, helicopter KT, flapping wing,....
Check Stock

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

  • 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
  • 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
  • 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
  • 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
  • Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

LAFEINA Aluminum Alloy 25T Adjustable Damping Servo Arm for 1/10 RC Crawler Car Traxxas TRX4 TRX6 Upgrade Parts (Titanium)

  • 25 Teeth Spline Steering Arm is CNC machined, and Spline Steering Arm Server Rocker makes it precise in size and stable in performance..
  • 25 Teeth Spline Steering Arm is compatible with Futaba Savox Emax HSP Power HD Xcore & Other popular prand servos motor, and 25T Servo Horn does not fit for Hitec and JR Servos..
  • 25 Teeth Spline Steering Arm is a great replacement part, and 25T Servo Horn fits for 1/8 1/10 RC Car Crawler..
  • 25 Teeth Spline Steering Arm includes a distance from hole center to hole center: 15mm, 18mm, and 25T Servo Horn 25 Teeth Spline Steering Arm is made of Aluminum alloy, strong and durable..
  • Package of 25 Teeth Spline Steering Arm includes: 1 x 25T Metal Servo Arm, Red, Spline Steering Arm Server Rocker, 25T Servo Horn 1 x 25T Metal Servo Arm, Black, 25T Servo Horn, 25T Servo Horn 25 Teeth Spline Steering Arm.
Check Stock

Traxxas 2071 Servo Case for 2070 Servo, 483-Pack

  • 【CHANGE DIRECTION OF ROTATION】Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
  • 【COMPACT SIZE】Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere. Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
  • 【OPERATING VOLTAGE】5.0-6.0V (directly connected to the receiver), Current: 2A, Length: approx 6 cm / 2.36 inch..
  • 【STABLE PERFORMANCE】The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life. High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
  • 【WIDELY USED】The Rotation Inverters widely used in JR Futaba Aircraft, RC Aircraft Steering Gear. Package includes 1x Servo Signal Reverser with JR male and female type plug..
Check Stock

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

LEGO Technic 42030 Remote Controlled Volvo L350F Wheel Load

  • Remote-control replica of the powerful Volvo L350F wheel loader. 2-in-1 model: rebuilds into a Volvo A25F articulated hauler.
  • Features a detailed 6-cylinder Volvo-green engine with moving pistons and fan, articulated servo steering, working lift arm, and a tipping bucket.
  • Activate the double remote-controlled Power Functions motors for powerful, simultaneous driving and digging action - just like the real machine!.
  • Includes LEGO Power Functions components: servo motor, XL-motor, large motor, medium motor, battery box, 2 remote controls and 2 infrared receivers.
  • Volvo L350F (with bucket lowered) measures over 9" high, 22" long and 6" wide. Volvo A25F measures over 9" high, 19" long and 6" wide.
Check Stock

3pcs M0090 9G Metal Gear Mini Servos 1.9KG Torque RC Servo Analog Servo Motor Micro Servo for RC Model Car Robot Flight Controller Toy Product

  • ✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
  • 0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
  • ✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
  • ✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
  • ✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
  • Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
  • ✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock