25T Servo Horn Steering Arm fits for Traxxas TRX4 Axial SCX10, SCX10 ii 90046 1:10 scale rc crawler, and Servo Horn 25T Steering Arm is CNC machined..
25T Servo Horn Steering Arm has 18mm and 22mm threaded mounting holes for adjustability, and Servo Horn 25T Steering Arm is of high quality..
25T Servo Horn Steering Arm is Red-Black, and Aluminum 25T Servo Horn Steering Arm is of small size and lightweight..
25T Servo Horn Steering Arm works on Futaba, Savox, Emax, HSP, Power HD, Xcore, Aluminum 25T Servo Horn Steering Arm works on other popular prand servos motor (Except Hitec and JR Servos)..
Package of 25T Servo Horn Steering Arm includes: 1 x 25T Servo Arm (Red-Black), Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm.
Tecunite 20 Pieces 3-pin Servo Extension Cable Wire Cord Female to Male RC Servo Extension Cord Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(5 Sizes)
Servo extension cord sizes: have 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 4 pieces servo extension cords.
Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
Package includes: 20 pieces of female to male servo extension cable wires with 5 different lengths, enough for you to use on different occasions.
☆【QUALITY METAL GEAR】：Using high-quality hard alloy materials, equipped with metal gears, the RC gear servo kit has high precision and is not easy to jam.
☆【HIGH-STRENGTH ALUMINUM FRAME】：Using high-quality all-aluminum frame, and after precision processing, the RC gear servo kit is strong and not easily deformed.
☆【HIGH OPERATING EFFECIENCY】：The RC gear servo kit has high operating efficiency, low noise, low power consumption, and is easy to install and disassemble.
☆【WITHSTAND HIGHER LOADS】：RC gear servo can withstand higher loads and ensure the normal operation of the server, effectively improving the performance of RC cars.
☆【5 SIZE SERVO ARMS】：There are 5 different servo arms in the RC gear servo kit package, which can meet your different needs, suitable for 1/10 1/12 remote control car RC off-road vehicle.
BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo，Waterproof Full Metal Gear Servo with 25T Servo Horn（180°）
【Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
DC Motor Speed Controller PWM Speed Controller DC 12V 24V 60V 500W Electric Motor Speed Control Regulator Power Wheels Speed Controller With PWM Signal Generator Driver Module
【High Grade Material】 This PWM Motor Speed Controller is made of premium quality circuit board material, which has a good durability and wear-resistance to ensure a long term service..
【Soft-s【Soft-start protection】 The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.tart protection】 The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor..
【Digital Encoder Button】 The digital encoder knob can adjust the motor speed, which is more accurate and consistent to control the engine speed than ordinary potentiometers..
【Features】 The duty cycle maximum and minimum limits can be set, as well as the PWM output frequency..
【Wide Input Voltage Range】 This PWM DC Motor Speed Controller supports a widely input voltage from DC 9V-60V, and it fits to 12V 24V 36V 48V power supply, at the same time the output current is 12A, power 500w, which ensures a widely application. You can use this Adjustable Motor Controller in different occasions upon different purposes..
UNIROI 7 in 1 RAB Holder Raspberry Pi Breadboard, Base Plate Case with IDE 328P Control Cord for Mega 2560, Raspberry Pi 3 Model B, 2 Model B,1 Model B+ RPI 4B Zero and 400 Points Breadboard
Wider Compatibility: This holder is widely compatible with IDE 328P control board, Raspberry Pi 3 Model B, 2 Model B, 1 Model B+ RPI Zero W and Zero 400 800 Points Circuit Board..
Convenient Slot Design: The RAB holder's slot location allows TF/Mini SD/HDMI/USB to be easily inserted without any hindrance..
Portability and Practicability: Made of long-lasting polyethylene plastic, features small size and lightweight, easy to be moved, carried and fixed on the flat table, convenient for making projects..
Package list: 1 x blue RAB holder, 4 x Non-slip mat, 1 x black screwdriver, 4 x M3*6+5 screws, 4 x PWM2*6+5 screws, 4 x PWM2*4+5 screws, 3 x M2*4+3 copper nuts, 1 x GPIO reference card. ( Note: Motherboard for raspberry pi and 400 breadboard are not included)..
CNCTOPBAOS 3 Axis GRBL Control Board USB Port CNC Router Controller Board grbl 1.1f with GRBL Offline Controller Remote Hand Control for CNC Engraving Milling Machine Mini DIY 1610 CNC 3018 PRO
♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board with Offline controller.
♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
♞【Offline Controller】It supports SD card and TF card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient).
KeeYees 3pcs ESP8266 ESP-12E Development Board WiFi WLAN Wireless Module CP2102 for NodeMCU for ESP-12E for Arduino
The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation..
The development board has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board. Support smart link smart networking..
The fast and affordable technology for WiFi. Make your development the fastest way combined with firmware for NodeMcu..
Modern, state-of-the-art LUA technology. It is an integrated unit with all available resources on board. It's very easy for Arduino projects or any development board with I / O pins..
Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
9imod 45KG High Torque Servo,Waterproof Servo Motors,Metal Gear Coreless Servo,8.4V HV Digital Servo,Full Aluminum Case for RC Servo 1/10 1/8 Crawler Car
1.Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments..
2.High Torque and Voltage Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/[email protected],controllable angle range from 0 to 180 degrees..
4.Widely Use Servo Motor:Compatible with 1/5,1/6,1/8,1/10,1/12 Scale Clawer Truck,TRX6,scx10,RC Car/Robot/Boat/Mechanical Arm/Quadcopter and other remote control models..
5.Standard Dimension RC Servo: 1.57 x 0.78 x 1.91 inch(40 x 20 x 48.6 mm).
