MEIRIYFA 3 Pin 4 Pin Fan Adapter PWM PC Chassis Cooling Fan Hub 8 Way Splitter 12V Speed Controller with 6 Pin Power Port
[Expand Fan Interfaces] – Excellent 1 to 8 splitter 8 way 4-pin and 3-pin PWM fan power supply extension hub, it provide a better power supply solution for PC computer case internal motherboard cooling fans..
[Function] – Through this hub, the governor can supply power to up to 8 fans, and the rotating potentiometer can adjust the speed of 8 PWM fans at the same time..
[Widely Compatible] – For both 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 17A to avoid damage to the governor..
[High Performance] – The high-performance fully black circuit board is adopted, the hub is small in size and convenient to use, the material is strong and the resistance is small, which does not affect the fan performance..
[Glue Fixation] – The thickened 3M glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis..
DC Motor Driver, DROK L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation
DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W..
STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time..
FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation..
PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ..
UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module..
[CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
[9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
[4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
[SERVO TESTER] Includes 3 modes to test servo motors or ESC.
[GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)
25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
PWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case
PARAMETER — working voltage DC 3.3-30V.
DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Voltage Boost Converter, DROK DC 8-60V to 10-120V 15A Numerical Control Step Up Voltage Current Adjustable Regulator Constant Module Output 48V 24V 12V Power Supply with LED Display Heat Sink
... designed with bright 4-digit LED to display output voltage, current at default simple mode. By manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Also the board is equipped with working indicators to show real-time working status..
Data Save --- The boost converter can save up to 10 sets of parameter settings. It’s easy to save and very convenient to call out parameters at any time you would like to..
Wide Application --- The step up power converter does great for wind power, DC generators, solar panels to charge battery, and it also can be made as a boost power supply to power devices..
Notes --- 1) No big difference between input and output voltage. Otherwise the power loss will increase then the actual output may not be as what expected.
2) Actual output current is mainly decided by the load. Converter can only set a limit on output current.
3) When powering high-power appliances, please turn off the automatic output function, correctly connect the converter, and then press the "OK" button to output. After the voltage rises to the set voltage, turn on the appliances..
SparkFun MicroMod ATP Carrier Board-Modular Interface Ecosystem-Connect microcontroller/Processor Board to Various Carrier Board peripherals
Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the board..
Features: M.2 Connector. Operating Voltage Range: ~3.3V to 6.0V (via VIN to AP7361C 3.3V Voltage Regulator). 3.3V (via 3V3).
Ports:1x USB type C, 1x USB type A Host, 2x Qwiic Enabled I2C, 1x CAN, 1x I2S, 2x SPI, 2x UARTs, 2x Dedicated Analog Pins, 2x Dedicated PWM Pins, 2x Dedicated Digital Pins, 12x General Purpose Input Output Pins, 1x SWD 2x5 header. Note: Depending on the design of the Processor Board, not all the pins may be accessible..
