Best Servo To Wireless Board

Favordrory 30 Pieces 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts, 5 Sizes

  • Size: 5 different lengths of 10 cm/ 3.95 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces servo extension cords.
  • Quantity: this package includes 30 pieces of female to male servo extension cable, enough for you to use, different length can meet your different needs.
  • Good connector: the connector of these wires are Futaba style connector with 3 pins, and it has an angle, in case you will install incorrectly, very convenient.
  • Feature: Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
  • Widely Application: these servo extension leads can be applied for Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
Check Stock

RC Servo Tester Centering Tool ESC Motor Checker Built in BEC 3CH High Precision for Airplanes Remote Control Models

  • The Mini ECS Motor Servo Centering Tool can easily detect the clearance, jitter and median of a kind of Servo ..
  • With Good stability and high accuracy,could connect the ESC and test the working status of the ESC or Motor easily..
  • It is able to connect three sets of servo or ESC at the same time, use SCM to control..
  • Power Supply:ESC built-in BEC or UBEC(4-5 pcs of #5 battery) to Provides power to the tester..
  • FPV Drone RC Servo Tester High Precision ECS Motor Servo Centering Tool for Remote Control Models RC Airplanes..
Check Stock

AGFRC 100KG High-Torque 1/5-Scale RC-Servo-Motor - 12V Waterproof Metal Gear Brushless Servo for 1/5 RC Models, Control Angle 180° (A280BVSW(3S/4S))

  • 3S / 4S LiPo Direct Connection - 1/5 scale high torque servo is with 3S / 4S LiPo high voltage application, available to connect with 3S / 4S LiPo battery directly without BEC. Ideal for 1/5 scale buggy, monster trucks, RC car, crawler, boat, plane, helicopter, on road, off road, etc..
  • IP67 Waterproof Design - Stable, low noise, dust-proof, advanced linearity and accuracy. With IP67 waterproof design, which makes servo still work normally when immersed up to 1 Meter depth of 30 minutes. Size: 65.8*30.0*59.0mm (2.59 x 1.18 x 2.32 in).
  • High Precision & Monster Torque - AGFRC 1/5 scale giant steering digital servo motor uses high-precision production technology to improve product tightness. The maximum torque of this HV servo is up to 125kg - cm (1738 oz-in) @ 16.0V and speed up to 0.080sec / 60° @ 16.0V..
  • High Quality & Performance - Waterproof 100KG high torque metal gear servo equipped with patent reinforced steel gear with pins, five ball bearings, full CNC Aluminium housing with groove surface for fast heat dissipation, accuracy with precision magnet angle sensor..
  • Satisfied Customer Service - Please read the detail description of this waterproof brushless servo first, if any ideas about our servo, contact us first & we will provide you a better solut....
Check Stock

FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo

  • The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
  • Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
  • And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
  • The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
  • - Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).
Check Stock

REXQualis Super Starter Kit based on Arduino UNO R3 with Tutorial and Controller Board Compatible with Arduino IDE

  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners ..
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself)..
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc..
  • Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service..
  • All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you..
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

Mcbazel Brook Wireless Fighting Board for PS3/PS4/PS5/N-Switch/PC Support Two Analog Sticks/Turbo Function/Tournament Mode/Touchpad (PS4)

  • Make your arcade stick become wireless device. The only wireless fighting board in the world. Support tournament mode!.
  • To fulfill the wireless use function, a battery is needed, and you can choose PS3/PS4 official controller’s battery for the PS4+ Audio & Wireless fighting board. When the battery is charging without connecting the board to console, you would see breathing light on player LED..
  • The PS4+ Audio & Wireless fighting board supports to be used wired or wirelessly on PS5/PS4/PS3/NS/PC, it also supports LED, 3DVR, touch key and audio(PS4 only) function. Compatible PS4 games are playable on PS5 console..
  • PS3/PS4/NS: Wired used for the first time. For wireless use in the future, press the PS key, the board will reconnect with the console..
  • Note: The default is in PS4 mode if the designated button is not hold down upon plug-in, and it can be simply connected to PC without pressing any button..
Check Stock

10 pcs 50cm 3-Pin Servo Extension Cords Cable Lead Male to Female Plug with 19.7inch Wire for RC Futaba JR Servo Connection Parts

  • 3-Pin Servo extension cords cable lead male to female plug..
  • Line length: About 50cm / 19.7inch;Packing quantity:10pcs..
  • This comes in very handy when your servo is further away from the controller than the wire on the servo allows..
  • Male connector on one end goes to controller, female connector mates with servo, allowing it to work in either system or as an adapter between systems..
  • Practical Range: Airplane, Helicopter, Quad Copter / Multi-Copter RC Cars, For Servo Connection or Receiver Connection..
Check Stock

maleonn RC Steering Servo Mount Post Stand with Screws for 1/24 RC Crawler Car Axial SCX24 Upgrades Deadbolt JLU C10 AXI90081 AXI00001 AXI00002 Accessories

  • 【PREMIUM SCX24 Servo Mount】High-Quality metal will make the Servo Bracket more solid and abrasion proof. Fine workmanship for lightweight and durable performance. Package Included: A set of SCX24 Servo Mount ONLY..
  • 【SCX24 Servo Mounting EXCELLENT Function】Axial SCX24 Upgrades, Upgrade to aluminum to get more durability whilst not adding too much weight to the chassis. Hard metal construction for precision and durability. Protect the car body and chassis very well, maleonn 1/24 scale accessories has perfect performance in ensuring the best state..
  • 【EASY TO INSTALL】 Easy and convenient to install and remove, easy for carrying. Don't need complicated installation steps, easily installation is complete..
  • 【SCX24 Servo Bracket Compatible with】 The RC Servo Post Set compatible with 1/24 SCX 24 Deadbolt AXI90081 C10 AXI00001 JLU AXI00002 RC Crawler Car.
  • 【Our Promise For SCX24 Accessories】 If you are at all unsatisfied with our Axial SCX24 Parts, please contact us and we will be happy to provide you with your choice of solutions..
Check Stock

BETU 35KG Coreless High Torque RC Servo,Waterproof Servo with Full Metal Gear, Steering Servo with 25T Servo Horn(270°)

  • 【Excellent Quality steering servo】Equipped with strong copper & stainless steel Gear, CNC aluminium middle shell, Less noise, light weight, Stable and water-proof..
  • Widely Use Rc Servo】The servo (Control Angle 270°) Compatible with 1/6,1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
  • 【Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 270 degrees, Excellent linearity, Precision control..
  • 【35KG Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
Check Stock