Best Shocks For Traxxas Slash

Hobbypark Aluminum Alloy Shock Absorber Assembled Full Metal Big Bore Shocks Front & Rear Replacement of 5862 for Traxxas 1/10 Slash 4x4 4WD Upgrade 4-Pack Gray

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc..
  • 2x Aluminum Alloy Front Shock Absorber (Total length:approx 100mm).
  • 2x Aluminum Alloy Rear Shock Absorber (Total length:approx mm 115mm).
  • Pack of 4 (These Shocks come without pre oiled /Just Little for testing purpose,so make sure you get some before installing).
Check Stock

Traxxas 3743A Blue-Anodized T6 Aluminum Steering Bellcranks and Drag Link

  • Enhance your steering precision, strength, and looks with a genuine Traxxas machined aluminum steering bell crank assembly.
  • Made from laser-etched, high-strength, blue-anodized T6 aluminum.
  • Integrated sealed bearings for silky smooth operation, reduced friction, and long life.
  • Fits Traxxas Bandit, Rustler, and 2WD Slash.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Orange.
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Vision Ed..
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

Hobbypark Aluminum Alloy Shock Absorber Assembled Full Metal Big Bore Shocks Front & Rear Replacement of 5862 for Traxxas 1/10 Slash 4x4 4WD Upgrade (4-Pack) (Red)

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc..
  • 2x Aluminum Alloy Front Shock Absorber (Total length:approx 100mm).
  • 2x Aluminum Alloy Rear Shock Absorber (Total length:approx mm 115mm).
  • Pack of 4 (These Shocks come without pre oiled /Just Little for testing purpose,so make sure you get some before installing).
Check Stock

Hobbypark Aluminum Alloy Shock Absorber Assembled Full Metal Big Bore Shocks Front & Rear Replacement of 5862 for Traxxas 1/10 Slash 4x4 4WD Upgrade (4-Pack) (Green)

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc..
  • 2x Aluminum Alloy Front Shock Absorber (Total length:approx 100mm).
  • 2x Aluminum Alloy Rear Shock Absorber (Total length:approx mm 115mm).
  • Pack of 4 (These Shocks come without pre oiled /Just Little for testing purpose,so make sure you get some before installing).
Check Stock

Hobbypark 4PCS Aluminum Front & Rear Shocks Absorber Assembled for 1/10 Traxxas Slash 4x4 4WD 2WD Rustler Stampede Upgrades Option Parts, Replacement of 5862

  • ✔Compatible with 1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 / Hoss 4x4 VXL, etc..
  • ✔Check Size before Buying.2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx mm 115mm),w/Screws.
  • ✔Replacement of Stock Model Part# 5862.
  • ✔Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing).
Check Stock

Hobbypark Aluminum Alloy Shock Absorber Assembled Full Metal Big Bore Shocks Front & Rear Replacement of 5862 for Traxxas 1/10 Slash 4x4 4WD Upgrade (4-Pack) (Navy Blue)

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc..
  • 2x Aluminum Alloy Front Shock Absorber (Total length:approx 100mm).
  • 2x Aluminum Alloy Rear Shock Absorber (Total length:approx mm 115mm).
  • Pack of 4 (These Shocks come without pre oiled /Just Little for testing purpose,so make sure you get some before installing).
Check Stock

Rc Metal Steel 54T 32P Spur Gear with 15T/17T/19T Pinions Gear Sets Replace 3956 for Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL/Summit/E-REVO/T-Maxx/Rustler 4X4 VXL

  • Compatible with Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL /Traxxas 1/10 Summit/Trxxas 1/10 E-REVO/T-Maxx/Jato/Rustler 4X4 VXL/Summit..
  • The inner diameter of the 15T/17T/19T pinion gear set is:5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures to....
  • compatible with 32-pitch, motor gear diameter: 45mm/1.77inch.
  • inner diameter: 11.9mm/0,47inch, replace for 3956..
  • Suitable for traxxas slash gears is made of heavy duty hardened steel, long time life span..
  • The speed depends on your gear ration. We provide three different teeth slash 4x4 gear set to make you more choice in gear ration..
Check Stock

AIYIHOBBY Aluminum Alloy Front Caster Block & Steering Blocks kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736(Blue)

  • Compatible with 1/10 Scale Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor, Nitro Slash, Bigfoot 2WD RC Cars Trucks ONLY..
  • 2WD Front Caster Steering Blocks kit can be easily upgrade replace Traxxas stock part #3632 Caster blocks, #3736 Steering blocks..
  • 1/10 Front caster steering blocks kit is made of aluminum alloy material for increased crash resistance and long-lasting durability during the most extreme RC action..
  • Metal front caster steering blocks is CNC precision machining for smooth suspension arms operation in all conditions..
  • Package Include(Necessary parts required for installation): 2*Steering Block, 2*Caster Blocks (left/right), 6*Screw Pins, 2*Screw, 4*5x11x4mm bearings, 4*Gasket..
Check Stock