Best Shore D Scale

Parkworld 692040 Splitter Marine 30 AMP Shore Power L5-30P Male Plug to 2 L5-30R Female Connector

  • 100% copper wire conductor inside, Used 10AWG*3 stranded copper inner wire, support max 30 Amp loading..
  • Heavy-duty power adapter cord for RV / Boat / Marine Shore Power inlet pedestal..
  • Marine Shore Power 30A L5-30P male plug with locking ring..
  • Dual Marine Shore Power 30A L5-30R female connectors with locking ring & collar..
  • Length : 36 inch (3 feet). Color : Yellow.
Check Stock

Electrically Conductive Adhesive, Silver Filled Epoxy, Long Pot Life AA-Duct 902LP, 5gm kit

  • Spec. Gravity 2.79 g/cc Mixed Viscosity Paste At 25°C Reactive solids contents, % 100,Pot Life 3 hrs.
  • Volume Resistivity 003e 0.0001,Shrinkage linear in/in 0.003 Lap shear strength, psi 9600.
  • Operating Temperature --50 to +170 °C,Appearance Silver.
  • Cure Time 2 minutes At 120°C,5 minutes At 100°C,12 hours At 25°C.
Check Stock

JackBoss Torin Hydraulic Low Profile Floor Jack 2.5 Ton (5,000 lb) Capacity Trolley Jack with Quick Lift Pump and Portable Storage Case, Red, AS825010CS

  • LIGHT DUTY STEEL SHORE: The Ellis Light Duty Steel Shore is an adjustable support jack that provides temporary or permanant support. This functional and dynamic jack post is the perfect tool for any residential or commercial construction project..
  • EASY TO USE: Simply turn the wing nut to adjust the height. Once the desired height has been reached use a 6mm Allen wrench to tighten the set screw located on the side of the wing nut. This will lock the wing nut into place to keep the shore from further adjustment..
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely powerful and long-lasting. The light duty steel shore is a perfect solution for sagging floors and foundation issues. It provides additional support in crawl spaces, attics, decks, wood, steel, and concrete beams..
  • SPECIFICATIONS: Weight 44 lb, Range of Adjustment: 85" - 109.
Check Stock

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 907, 5 gm kit

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/100 Resin/Hardener.
Check Stock

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 907, 10 gm kit

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/100 Resin/Hardener.
Check Stock

Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-Bleeding AA-Duct 2919, 2.5gm kit

  • Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
  • Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
  • Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
  • Cure time 4 hrs At 65°C, 24.0 hour At 25°C.
Check Stock

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • [Make Structural Repairs]: The BISupply Adjustable Shore Jack Post House Support Jacks 1-Pack transforms 4x4 inch (10.2 cm) square lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-....
Check Stock

DURAMIC 3D TPU Filament 1.75mm Black, TPU Flexible Filament 95A, Soft TPU 3D Printing Filament, 1kg Spool, Dimensional Accuracy +/- 0.05mm, Black 1 Pack

  • High Elasticity & Strength - Duramic TPU filament 1.75mm features not only the high elasticity to stretch 3 times more than its original length, but also high strength resistance with shore hardness of 95A. Duramic TPU is a perfect choice if you want to print rubber-like flexible and resistant models, parts, jigs and tools, etc..
  • Consistent Dimater - Duramic uses digital caliper system to ensure the highly accurate and consistent diameter 1.75mm with 100% tolerance ±0.05mm, 99.9%±0.04mm，99%±0.03mm and 97% ±0.02mm. The consistency and true advertisement of diameter ensures you clog-free printing experience..
  • SMOOTH & STABLE PRINTING - Duramic TPU filament 1.75mm is produced with jam-free patent, along with excellent layer adhesion, you can get smooth extrusion and stable printing experience without clogging. Recommended Nozzle Temp 220±10°C, bed temp 25-60°C and printing speed 20-40mm/s..
  • Compatible with not only direct extrusion printers but also bowden extrusion printers and 3d pens in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling..
  • RISK-FREE SERVICE & PACKAGE - What you get: One-month free trial, Lifetime ....
Check Stock

AA-BOND FDA15 FDA Medical Grade Epoxy Adhesive, Two Part, 5 gm pouch by Atom Adhesives

  • Spec. Gravity1.16 g/cc Cured Water Absorption 0.23% After 24 hours Viscosity 4300 cP.
  • Mechanical Properties Hardness, Shore D 87 Adhesive Bond Strength 2100 psi Lap shear, 4 hrs At 65°C.
  • Thermal Properties CTE, linear 30.6 µin/in-°F At 68 °F Maximum Service Temp Air 248 °F.
  • Mix Ratio, parts by weight 100/20 Resin/Hardener.
Check Stock

3 Axis DRO Digital Readout Magnetic Scale DRO Display Kit CNC Milling Lathe,DIY Travel Length

  • DIY Magnetic Scale Kit ,-Are you faced with not knowing how to choose the right magnetic scale encoder travel length? Tailor-made for machine tool enthusiasts, experience the fun of magnetic scale magnetic scale combination,-Simple operation, arbitrary assembly.
  • So you will have the follow product : A -----Aluminum profile 1pcs 1M and 2pcs 800mm , -Various assembly methods ,1 .you can cut it to 3pcs short scale 2. 1pcs long 1.8M and a short scale .That means the DIY kit can be widely for lathe machine .milling machine. B , 3pcs Magnetic Scale Sensor (reading head) 5um resolution , C. Magnetic Tape & Stainless Steel Strip -2.4M D,End cap - 3 Pair. E.All of accessory for mounting scale ( User Manual included ) . F Digital Readout 3 Axis DRO.
  • Why choose magnetic scale : Fully sealed redhead with perfect structure of the profile takes it match IP67 protection class ,life time is longer thna linear glass , baesd on we provide 5 years warranty.
  • High Performance- 3 Axis DRO Digital Readout can be widely used on the Milling Machine bridgeport milling machine,Lathe Machine /7inch LCD Screen DRO ,Easy for operation. Built-in User....
Check Stock