Best Shore Hardness Meter

KODAK PVA 3D Printer Filament, 1.75 mm +/- 0.05 mm, 350g (0.8lbs) Spool, Natural

  • EXTRA-DRY: vacuum resealable Ziploc bag with silica gel to protect filament from humidity and dust..
  • FLEXIBLE: semi-flex 3D print TPU filament with a shore hardness of 98A for shatterproof prints..
  • PREMIUM: flexible 3D filament TPU engineered to reduce jamming for reliable 3D printed parts..
  • COMPATIBLE: 3D flexible filament for most open material 3D printers..
  • ONLINE SUPPORT: We're here to help! Contact us or visit our support center. Satisfaction !.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 50gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 2.5gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Ariat Women's FR DuraStretch Flame Resistant Mid Rise Bootcut Jean, Oceanside Entwined, 29 Long

  • HEAVY DUTY LIFTING SHORE: The Ellis Heavy Duty Steel Lifting Shore provides temporary or permanent shoring support for heavy load applications. This lifting shore is designed to provide support in both residential and commercial structures..
  • EASY TO USE: To use this lifting shore, simply set the shore in place and use the 1" steel adjustment rod to adjust the the shore. Once the shore is in place and adjusted to the desired height, tighten the screw set to lock the nut and to set the shore in place as a permanent support solution..
  • SAFE & SECURE: Built with high quality steel, this lifting shore is built to be functional, long lasting, and durable. This patented design reduces the amount of friction caused when the shore is under load and increases its jacking capability. This product comes with a safety lock set screw to ensure safety..
  • SPECIFICATIONS: Range of Adjustment: 55" to 80", Safe Load Capacity: 34,000 lbs, Weight: 72 lbs, Top Plate: 8"x8"x1/2", Top Plate: 4-Holes 9/16" Diameter spaced 1" OC from edges, Acme Screw: 2.875" Diameter with Approx. 4 Acme Threads per inc....
Check Stock

Low Cost, 1 Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive AA-DUCT AD1, 2.5gm Syringe

  • Mixed Viscosity 6800 cP, Density gm/cc 2.35, Silver percentage 65-75.
  • Mechanical Properties Hardness, Shore D 83, Pot Life 6 months At 25 °C 9 months refrigerated.
  • Sheet Resistivity 10-12 m?/sq, Lap shear strength 2000 Lb/in2.
  • Cure Time 0.7 hours At 200 °C, 1.5 hours At 180 °C, 2.5 hours At 160 °C.
Check Stock

ARCTIC Thermal Pad 145 x 145 x 1.0 mm Pack of 1 - Thermal Compound for Coolers Efficient Thermal Conductivity Gap Filler Non-Stick Safe Handling Easy to Apply - Blue

  • EFFICIENT THERMAL CONDUCTIVITY: The Thermal Pad based on silicone and a special filler offers a conductivity of 6.0 W/mK, outperforming generic pads.
  • FILLING THE GAPS: Due to its low hardness and compressibility it works as the perfect gap filler, bridging uneven surface & gaps without any problems.
  • SAFE HANDLING: Does not contain metallic particles, is electrically isolating & not capacitive. Contact with electrical traces does not cause damage.
  • EASY TO APPLY: Installing the Thermal Pad is child's play and perfect for beginners, they are non-stick and can be easily removed and repositioned.....
  • OTHER INFORMATION: Quantity: Pack of 1, Size: 145 x 145 x 1.0 mm, Thermal Conductivity: 6.0 W/mK, Hardness: 25 Shore 00, Continuous Use Temperature:....
Check Stock

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 902, 2.5gm kit (1) (One Pack)

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener.
Check Stock

SainSmart TPU Filament 1.75mm, 0.25KG (Blue+Red)

  • What you get: SainSmart Flexible TPU Filament 0.25KG × 2: Blue+Red.
  • 0.25 kg (approximately 0.55 lbs) per spool.
  • Recommended extruder temperature: 200 - 220°C.
  • Recommended platform temperature: 40 - 65°C.
  • TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible.
  • Compatible with all FDM printers on the market which accept 1.75 mm filament.
  • Including Prusa i10, Monoprice MakerSelect, SainSmart xCreality, and other RepRap printers.
  • Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more.
Check Stock

CAP Barbell 50-Pound Adjustable Dumbbell Weight Set c Black 50 LB Pair

  • CONSTRUCTION – Includes PAIR of 35 lb dumbbells. Dumbbell heads are made from ASTM A48 Class 20 grey iron coated in 80 shore hardness rubber joined....
  • VERSATILE - Dumbbells offer the ability to target specific muscle group exercises or get a full body workout.
  • FEATURES – Original Hex Shaped heads prevent rolling. The medium depth knurling on the ergo handle provides essential grip and security during use.....
  • FUNCTIONAL - Perfect for isolations, full body, functional and HIIT training.
  • TRUST – Trust experience. CAP has been a leading pioneer in the fitness industry for over 30 years and has locations worldwide. Chances are if you....
Check Stock

Ellis Manufacturing Company Heavy Duty Steel Lifting Shore - Range of Adjustment 79 to 104 - Safe Load Capacity 30,000 lbs

  • HEAVY DUTY LIFTING SHORE: The Ellis Heavy Duty Steel Lifting Shore provides temporary or permanent shoring support for heavy load applications. This....
  • EASY TO USE: To use this lifting shore, simply set the shore in place and use the 1" steel adjustment rod to adjust the the shore. Once the shore is....
  • SAFE & SECURE: Built with high quality steel, this lifting shore is built to be functional, long lasting, and durable. This patented design reduces....
  • SPECIFICATIONS: Range of Adjustment: 79" to 104", Safe Load Capacity: 30,000 lbs, Weight: 88 lbs, Top Plate: 8"x8"x1/2", Top Plate: 4-Holes 9/16"....
  • TRUST IN ELLIS: Ellis Manufacturing Company has been a leading manufacturer of construction materials since 1951. Our primary focus has always been on....
Check Stock