Best Shore Indentation Hardness

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 907, 5 gm kit

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/100 Resin/Hardener.
Check Stock

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 907, 10 gm kit

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/100 Resin/Hardener.
Check Stock

Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-Bleeding AA-Duct 2919, 2.5gm kit

  • Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
  • Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
  • Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
  • Cure time 4 hrs At 65°C, 24.0 hour At 25°C.
Check Stock

AA-BOND FDA15 FDA Medical Grade Epoxy Adhesive, Two Part, 5 gm pouch by Atom Adhesives

  • Spec. Gravity1.16 g/cc Cured Water Absorption 0.23% After 24 hours Viscosity 4300 cP.
  • Mechanical Properties Hardness, Shore D 87 Adhesive Bond Strength 2100 psi Lap shear, 4 hrs At 65°C.
  • Thermal Properties CTE, linear 30.6 µin/in-°F At 68 °F Maximum Service Temp Air 248 °F.
  • Mix Ratio, parts by weight 100/20 Resin/Hardener.
Check Stock

KODAK PVA 3D Printer Filament, 1.75 mm +/- 0.05 mm, 350g (0.8lbs) Spool, Natural

  • EXTRA-DRY: vacuum resealable Ziploc bag with silica gel to protect filament from humidity and dust..
  • FLEXIBLE: semi-flex 3D print TPU filament with a shore hardness of 98A for shatterproof prints..
  • PREMIUM: flexible 3D filament TPU engineered to reduce jamming for reliable 3D printed parts..
  • COMPATIBLE: 3D flexible filament for most open material 3D printers..
  • ONLINE SUPPORT: We're here to help! Contact us or visit our support center. Satisfaction !.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 50gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 2.5gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Ariat Women's FR DuraStretch Flame Resistant Mid Rise Bootcut Jean, Oceanside Entwined, 29 Long

  • HEAVY DUTY LIFTING SHORE: The Ellis Heavy Duty Steel Lifting Shore provides temporary or permanent shoring support for heavy load applications. This lifting shore is designed to provide support in both residential and commercial structures..
  • EASY TO USE: To use this lifting shore, simply set the shore in place and use the 1" steel adjustment rod to adjust the the shore. Once the shore is in place and adjusted to the desired height, tighten the screw set to lock the nut and to set the shore in place as a permanent support solution..
  • SAFE & SECURE: Built with high quality steel, this lifting shore is built to be functional, long lasting, and durable. This patented design reduces the amount of friction caused when the shore is under load and increases its jacking capability. This product comes with a safety lock set screw to ensure safety..
  • SPECIFICATIONS: Range of Adjustment: 55" to 80", Safe Load Capacity: 34,000 lbs, Weight: 72 lbs, Top Plate: 8"x8"x1/2", Top Plate: 4-Holes 9/16" Diameter spaced 1" OC from edges, Acme Screw: 2.875" Diameter with Approx. 4 Acme Threads per inc....
Check Stock

Low Cost, 1 Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive AA-DUCT AD1, 2.5gm Syringe

  • Mixed Viscosity 6800 cP, Density gm/cc 2.35, Silver percentage 65-75.
  • Mechanical Properties Hardness, Shore D 83, Pot Life 6 months At 25 °C 9 months refrigerated.
  • Sheet Resistivity 10-12 m?/sq, Lap shear strength 2000 Lb/in2.
  • Cure Time 0.7 hours At 200 °C, 1.5 hours At 180 °C, 2.5 hours At 160 °C.
Check Stock

ARCTIC Thermal Pad 145 x 145 x 1.0 mm Pack of 1 - Thermal Compound for Coolers Efficient Thermal Conductivity Gap Filler Non-Stick Safe Handling Easy to Apply - Blue

  • EFFICIENT THERMAL CONDUCTIVITY: The Thermal Pad based on silicone and a special filler offers a conductivity of 6.0 W/mK, outperforming generic pads.
  • FILLING THE GAPS: Due to its low hardness and compressibility it works as the perfect gap filler, bridging uneven surface & gaps without any problems.
  • SAFE HANDLING: Does not contain metallic particles, is electrically isolating & not capacitive. Contact with electrical traces does not cause damage.
  • EASY TO APPLY: Installing the Thermal Pad is child's play and perfect for beginners, they are non-stick and can be easily removed and repositioned.....
  • OTHER INFORMATION: Quantity: Pack of 1, Size: 145 x 145 x 1.0 mm, Thermal Conductivity: 6.0 W/mK, Hardness: 25 Shore 00, Continuous Use Temperature:....
Check Stock