YXMY2020 Benchtop Digital Resistance Tester AT527 AC Low ohm Meter Battery Internal Resistance Meter for Testing Various Electronic Components
This instrument can test 0.0001mΩ~3.3kΩ resistance, 0.00001V~400.000V DC voltage, maximum resistance 33000 display digits, and maximum voltage 800000 display digits. The AT527/527B combines high-precision, high-resolution and ultra-high-speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 70 times per second..
The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay..
The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, comes with database function and Excel..
The export function can be effectively applied to remote control and data acquisition and analysis..
Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use
20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.
support cursor measurement, cursor mode is not less than voltage difference (△ V), time difference (△ T), time difference & voltage difference ( △ V), four modes of automatic cursor.
★ 3: With automatic range function, support horizontal, vertical, single waveform / multi-waveform tracking.
probe attenuation multiples of 1X, 10X, 100X, 1000X, four kinds.
★ 4: Built-in 6-bit hardware frequency meter, which can measure 2Hz ~ 20MHz.
with current measurement function, measurement range: 100.0mA / V ~ 1KA / V.
★ 5: It has 30 kinds of automatic measurement functions, and can customize the measurement menu.
it has the waveform interception function, and can be seamlessly connected with the same brand signal generators. Support LABVIEW communication, support secondary development. Ultra-portable oscilloscope with a volume of 301 x 152 x 70 mm, ultra-thin body design, thickness of 70 mm, weight of 1.1 kg, saving more desktop space, ultra-quiet design, power consumption not higher than 18W.
Taccometer Infrared Thermometer, -58℉-1112℉(-50℃-600℃), Adjustable Emissivity, Digital Color Display, High&Low Alarm, Non-Contact, IR Thermometer for Industrial/Cooking (Not for Human)
High Accuracy--With the latest sensor technology, this infrared thermometer can measure the temperature range of -50°C~600°C (-58°F~1122°F) in only 0.5 seconds, and the measurement error is NOT exceeds ±2°. Adjustable emissivity from 0.1 to 1.0 (Pre-set at 0.95) provides measurement accuracy in differernt materials surfaces..
Easy to Use--Only need to focus and point the measure object, then press the button of this temperature gun, within a second you can get the surface temperature of the target object. It will automatic power off after 20 seconds of no operation. High & low Temprature Alarm,when measured reading over trigger point, LCD displays flashing with RED color light as alert signal..
Wide Range Applications--This thermometer gun is to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points.
AC, refrigerators, car engine, and furnace etc. °C/°F changed easily as you need. Using this unit, you can be safe to make the measurement..
Multi-laser Points--With upgraded laser technology, the infrared thermometer emits multi-laser points as circular infrared light instead of the single or dual laser like others use. The red circular helps you to locate....
Shanrya Digital Satellite Signal Finder, ABS Accurate Signal Alarm Buzzer Digital Satellite Signal Meter with LCD Blue Backlight for Signal Measurement
Quality Component: Professional design, designed with a compass for easier and quicker tuning. Powered by the receiver, nice tool for campers..
Easy To Use: With an electronic buzzer, easy operation, LCD with backlight to show the satellite signal..
Accurate Measurement: This professional digital satellite detector is much more accurate than any other measuring equipment of its kind..
Useful Tool: Connect your LNB and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to..
Signal Alarm Buzzer: Built in 0Hz, 22KHz, 13V, 18V signal alarm buzzer, buzzer and damping control..
HANMATEK 110mhz Bandwidth DOS1102 Digital Oscilloscope with 2 Channels and Screen 7 inch / 18 cm, TFT-LCD Display, Portable Professional Oscilloscope Kit with 1GS/s Sampling Rate (Not for Medical Use)
support cursor measurement, cursor mode is not less than voltage difference (△ V), time difference (△ T), time difference & voltage difference ( △ V), four modes of automatic cursor.
★ 3: With automatic range function, support horizontal, vertical, single waveform / multi-waveform tracking.
probe attenuation multiples of 1X, 10X, 100X, 1000X, four kinds.
★ 4: Built-in 6-bit hardware frequency meter, which can measure 2Hz ~ 20MHz.
with current measurement function, measurement range: 100.0mA / V ~ 1KA / V.
★ 5: It has 30 kinds of automatic measurement functions, and can customize the measurement menu.
it has the waveform interception function, and can be seamlessly connected with the same brand signal generators. Support LABVIEW communication, support secondary development. Ultra-portable oscilloscope with a volume of 301 x 152 x 70 mm, ultra-thin body design, thickness of 70 mm, weight of 1.1 kg, saving more desktop space, ultra-quiet design, power consumption not higher than 18W.
Testex Coarse Minus Grade (0.5-1.0 mils / 12-25 microns), Roll
【Lightweight & Portable】Lightweight and portable, this wall‑mounted detector is cordless, small in size, and easy to carry around for measurement..
【Usages】The detector can easily detect wood, beams, metal nails, pipes or steel behind wall, floors or ceilings..
【Indicating Signal Design】Indicating signal design, this wall detector has LCD backlight display and sound indication, you can clearly know the thickness of the detection..
【Automatic Calibration】Automatic calibration. This wall detector can automatically calibrate all detected objects with high detection accuracy..
【Low Battery Indicator】Low battery indicator, the wall-mounted detector will have a low battery warning screen to avoid the embarrassment of a dead battery..
Wood Moisture Meter, 2 in 1 Pin & Pinless Moisture Tester, Dr.meter Digital Dampness Moisture Sensor Detector for Wood Firewood Drywall Paper Floor Woodworking, Water Leak Detector
▶ 【2-in-1 Moisture Meter】The 2-in-1 Dr.meter moisture meter offers ideal dual functions of pin-type and pinless scanning in one. The pinless scanning mode with non-invasive measurement is ideal for high-end wood and building materials. The pin-type mode with faster response and higher accuracy is great for all kinds of wood and building materials..
▶ 【Wide Measuring Range】Different measurement modes correspond to different measurement ranges. In the pin-type mode: wood: 5%-50%, building materials: 1.5%-33%, error range: +/-2%.
In the pinless scanning mode: wood: 5%-53%, building materials: 0-35%, error range: +/-4%..
▶ 【Over-range Alert】There are four pinless scanning modes of softwood, hardwood, masonry and drywall. The general algorithm has been written into the user manual to reduce the redundant settings before use to facilitate customers. When the wood moisture exceeds 17% or the wall humidity exceeds 70%, the wood moisture tester will beep to alert you..
▶ 【Current Ambient Temperature Measurement】The Dr.meter intelligent wood moisture meter can not only measure the humidity of wood and building materials, but also it can measure 0-40 degree current environmental temperature with only +/- 2 degree error..
RaeSung AS63A Digital Vibration Meter 0.1~199.9m/s LCD Electronic Vibration Frequency Analyzer Tester Handheld Vibrometer Digital Pen Vibration Analyzer
Equipped with AC signal output interface..
Low power indication function and auto power-off function..
Simple to use, the structure is compact, portable for carrying along with measurement..
Measurement range of displacement: 0.001-1.999mm p-p (Velocity and displacement range is limited by acceleration199.9m/s2)..
