Aracombie 4PCS 1-1/4 Inch to 2-1/8 Inch Hole Saw Kit for Wood, 1.2 Inch Cutting Depth Hole Cutter Drill Bit with Mandrel, Round Hole Saw Set for Cornhole Boards Plastic Drywall Soft Metal (Black)
Package Contains: 4 x Wood Hole Saw Kit, 4 Different Cut Size: 1-1/4 inch/32mm, 1-1/2 inch/38mm, 1-3/4 inch/44mm, 2-1/8 inch/54mm. The hole saw cutter set can be easily installed on a handheld or vertical drill, Colour: Black..
Wide Range of Application: Plastic hole saw has sharp teeth, which can quickly drill a smooth edge hole in wood, plastic, PVC, cornhole boards, drywall, fiberglass, thin metal and other materials. Round hole saw cannot be used to cut concrete..
Cost-Effective: The fiberglass hole saw cut to a depth of approximately 1 inch / 25.4mm. A set contains 4 pack circle hole saw cutter, which is very suitable for woodworking, decorators, DIY enthusiasts, and craftsmen to buy and use..
Material: Drywall hole saw kit is made of high quality carbon steel, which is wear-resistant and durable. This fiberboard hole saw surface is painted and the side chip hole is designed to further extend the service life..
After-Sales Guarantee: Aracombie has a 24-hour human customer service. If you have any questions before purchasing or are not 100% satisfied with the product, please fe....
KingTool 3 in 1 Multi Blade Hand Saw - 12-Inch Solid Frame Hacksaw, 14-Inch Universal Handsaw and 10-Inch Standard Utility Saw
KingTool 3 in 1 hand saw including 12-Inch solid frame hacksaw blade, 14-Inch universal handsaw blade and 10-Inch standard utility saw blade, and a shared handle for cutting a plastic, metal, pipe, particle board, and wood..
The installation is easy and simple, and the saw blade can be installed in 3 seconds at the fastest. Ergonomically designed bi-material handle for comfort and control..
Solid Frame Hacksaw - A 24inch teeth Bi-Metal hack saw blade and a 18 teeth hack saw blade are included in this 3 in 1 saw set. Adjustable flush cuts at 90° and 180° angles.
Universal Handsaw - A 14”/355mm 7TPI/8TPI universal handsaw blade is included in this 3 in 1 hand saw set..
Standard Utility Saw - A 10”/255mm 7TPI/8TPI standard utility saw blade is included in this 3 in 1 hand saw set.Each saw features Tri-Ground teeth to give you fast, efficient cuts.
5 PCS Saw Blades in All: Here, we provide you with the sharp band saw blades for replacing the worn-out ones on your meat bone cutting machines. Overall length: 65" / 1650 mm.
thickness: 0.02" / 0.5 mm. Each pack contains 5 pieces, able to meet your demands for sawing large amounts of raw materials. Besides, all these blades are individually wrapped in rust-proof paper, ensuring they are intact when received..
Premium Carbon Steel: Our meat bandsaw blades are made of high-strength carbon steel (65 Mn), firmly & seamlessly welded, making them hard to break. The premium materials ensure a longer service life than those easy-to-fracture ones..
Harder for Repeated Sawing: Our meat cutting saw blades feature a higher hardness on both belt and saw teeth, enduring repeated sawing of various food ingredients. Its belt hardness is 44 HRC and saw teeth reach 64 HRC. An enhanced hardness ensures a lengthened life span..
Dense Teeth for Smooth Cutting: The teeth of our butcher saw blades are processed with high-frequency hardening, reducing wear and tear. They are sure to cut flatly, smoothly, and rapidly. The saw teeth are close together, 4 teeth per inch, minimizing meat loss..
Highly Compatible for Wide Uses: Our band saw blades (5 PCS per ....
16pcs Saw Blade Bushing Set Saw Blade Adapter Ring, Angle grinder inner aperture conversion gasket，1 Inch to 20 mm, 1 Inch to 5/8 Inch, 7/8 Inch to 5/8 Inch, 20 mmto 5/8 Inch,4 per Model
Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
For saw blade clamping plate and electric saw clamping, the hole is larger, so we need to use washers to reduce the diameter! Saw blade reducing ring, inner hole switching ring, saw blade inner hole switching reducing ring, it is convenient to use with saw blade splint, electric grinder and electric saw..
4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster
1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
EZARC Bi-Metal Hole Saw Kit, 13-piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard
【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
【Complete Hole Saw Set】9pcs M42 Bi-metal hole saw: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm),to meet needs of different situations. 1 x Small Mandrel, 1 x Large Mandrel with Adapter and Pilot Drill Bit. The maximum cutting depth is 1-7/8" (48mm)..
DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch
MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
