Best Silver Brazing

Yonico Router Bits Furniture Molding and Trim Set 2 Bit Triple Bead & Flute 1/2-Inch Shank 16261

  • For 1" triple bead and triple flute column and face moldings..
  • Add trim moldings to your furniture projects.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • Silver induction brazing for maximum strength and durability.
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

Yonico Raised Panel Cabinet Door Router Bits 2-Inch Diameter Ogee 1/4-Inch Shank 12137q

  • This 2" ogee panel raiser has a cutting depth of 3/4" and a total cutting height of 1/2" which includes a 1/8" fillet and a 1/4" shank..
  • Create center panels for standard rail and stile cabinet doors.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Yonico 13201 1/4-Inch Bead 2 Bit Canoe Joint Router Bit Set 1/2-Inch Shank

  • This set of canoe joint router bits will cut 1/4" bead - male and female joint components with a 1/8" cutting depth. 1/2" shanks..
  • Create canoe joints for projects that require variable angle joints such as canoes, tubs and more.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Yonico Cabinet Door Rail and Stile Router Bits Set 2 Bit Shaker 1/2-Inch Shank 12249

  • These bits cut shaker rail and stile cabinet door frames at a depth of 3/8" in stock up to 7/8". They feature 1/2" shanks and come in a wooden box..
  • Create rail and stile cabinet door frames.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • Silver induction brazing for maximum strength and durability.
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

Yonico Slot Cutter Router Bit 1/4-Inch Height X 3/8-Inch Depth 1/4-Inch Shank 14184q

  • Use this bit to cut 1/4" Wide x 3/8" deep slots or rabbets. Bit features two carbide cutters and 1/4" Shank..
  • Cut slots and grooves for joinery and other general use.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on table mount and handheld router.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Yonico Top Bearing Slot Cutter Router Bit 1/8-Inch x 5/16-Inch 1/4-Inch Shank 14914q

  • This top bearing slot cutter router bit routes a 1/8" x 5/16" slot. The overall diameter is 1-1/4" and 1/4" shank..
  • Cut slots and grooves for joinery and other general use.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on table mount and handheld router.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Yonico Surfacing Planing Router Bits Bottom Cleaning 2-1/4-Inch Diameter 1/2-Inch Shank 14872

  • This bottom cleaning router bit has a cutting diameter of 2-1/4" and a cutting depth of 9/16". This bit also features center meeting blades and a 1/2" shank..
  • For routing perfectly clean cavities and resurfacing projects.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on CNC, table mount and handheld routers (Up to 2-1/2" diameter).
  • Silver induction brazing for maximum strength and durability.
Check Stock