Best Silver Soldering Flux Paste

Valtcan Fume Extractor Soldering Fan Smoke Absorber

  • Powerful Fume extractor removes Smoke fume, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick, safely and efficiently..
  • Solder Flux fume extractor fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in the filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place..
  • Adjustable tilt for optimum solder smoke absorption angle from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained..
  • Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations..
  • On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters..
Check Stock

yzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)

  • 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
  • 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
  • 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
  • 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
  • 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics,IC, home improvement, cable TV, radio/sterro,toys etc DIY..
Check Stock

MG Chemicals 4895-227G 60/40 Rosin Core Leaded Solder, 0.032\ Diameter, 1/2 lbs Spool

  • Tin Lead Rosin Core Solder:rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices,gauge wires, toys, stained glass, jewelry and more.
  • Solder Wire Composition:60% Tin and 40% lead. Melting point 190°C / 374°F, quick and easy,Rosin core with 2% flux, no extra flux is needed.
  • Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity.
  • With the solder wire reel, soldering can be accomplished quickly..
  • Pack Content: 50g( 0.11lbs) 0.6mm X1 and 50g( 0.11lbs) 1.5mm X1, perfect as a starter kit for beginners.
  • Rosin Core Solder Wire:We have a professional team and provide high 60/40 rosin core solder wire..
Check Stock

BOJACK Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste 50g

  • The ideal flux for electrical and electronic repairs.
Check Stock

SONEAK 60/40 Tin Lead Solder With Rosin Core For Electrical Soldering 1.0mm 50g

  • ★ Tin Lead Solder Wire: High quality Rosin Core Solder Wire.
  • ★ Sn60-Pb40 Solder: Sn 60%- Pb 40%, Flux 2.0%.
  • ★ Lower Melting Point: 361F/183C, easy to be soldered, flows smoothly, soldering fast and strong shiny soldering point.
  • ★ Special Features: This SONEAK 1.0mm solder wire offers lower temperature melting, pretty good flow,clean, less smoke, reliable and nice soldering joint.
  • ★ Applications: Very good soldering capability for electrical soldering, esp DIY project, Home improvement, Maintenance of sterro, toys, TV circuit boards etc. repairing.(Warning: This product can expose you to lead which is know to the State of Califormia to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings website).
Check Stock

RadioShack Rosin Soldering Flux Paste, Non-Spill - Made in USA - 2 oz. Jar

  • The best flux for electrical and electronics repairs.
  • Apply flux when soldering to produce strong solder joints.
  • No-spill formulation, easy to clean if needed (not required).
  • RadioShack Catalog №: 6400022 (64-022, 640-0022).
Check Stock

Kwik Clean Flux Cleaner 16 Oz

  • Kwik-Clean flux remover doesn't need mixing or diluting.
  • Just spray on Kwik-Clean when you're done soldering, then use paper towel to clean project.
  • ALSO USE WITH PATINA: use either the same paper towel or a clean one to apply the patina..
  • Mixing the Kwik-Clean with Patina gives added cleaning of the flux and a finer tone on the patina..
  • After Patina is applied, clean again with Kwik-Clean. Polish as you normally would..
Check Stock

Acid Brushes - 36 Count 3/8 Inch Horsehair Acid Flux Brushes, Disposable Glue Brushes for Woodworking, Epoxy Brushes for Resin, Great for Crafting, Soldering, in The Home, and School, or Shop

  • Specs: 5-¼” Tubular Metal Handle - 7/8” long by 3/8” wide  Horsehair Tight Bristles - with 3/8” Ferrule -  Overall Brush Length 6”..
  • 100% pure Black Horsehair Bristles and strong long lasting Tin Metal Fluted Ferrules Handles are Durable and comfortable to hold and Reduce Drips..
  • Economical Handy Tool for applying a variety of materials  Interior, Exterior, such as Glue, Acid, Flux, Oil, Paste, Pipe Dope, Soldering, greasing, Touch-up, applying Zinc primer, Spreading, Dusting, Cleaning, Cooking, Baking, Art, Woodworking, Workbooking,  Arts & Crafts, or other general-purpose applications and more, hobbyists and professionals..
  • Sturdy Durable Brushes whether you use each Brush ten times or only once..
Check Stock

Acid Brushes - 48 Count 3/8 Inch Horsehair Acid Flux Brushes, Disposable Glue Brushes for Woodworking, Epoxy Brushes for Resin, Great for Crafting, Soldering, in The Home, and School, or Shop

  • Specs: 5-¼” Tubular Metal Handle - 7/8” long by 3/8” wide  Horsehair Tight Bristles - with 3/8” Ferrule -  Overall Brush Length 6”..
  • 100% pure Black Horsehair Bristles and strong long lasting Tin Metal Fluted Ferrules Handles are Durable and comfortable to hold and Reduce Drips..
  • Economical Handy Tool for applying a variety of materials  Interior, Exterior, such as Glue, Acid, Flux, Oil, Paste, Pipe Dope, Soldering, greasing, Touch-up, applying Zinc primer, Spreading, Dusting, Cleaning, Cooking, Baking, Art, Woodworking, Workbooking,  Arts & Crafts, or other general-purpose applications and more, hobbyists and professionals..
  • Sturdy Durable Brushes whether you use each Brush ten times or only once..
Check Stock

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering 0.8mm 50g

  • √ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire.
  • √ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37).
  • √ Flux content 1.8%,electrical soldering wire dia is 0.8mm (0.0315inch),gross weight 50gram (0.11lbs),good size for pocket.
  • √ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point..
  • √ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc. (WARNING: This product can expose you to lead, which is known to the State of California to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings Website).
Check Stock