Everyglow Glow in The Dark 3D Printer Filament, 1.75mm PLA Filament Fits for Most FDM Printers 1KG (2.2 LBS) Spool Dimensional Accuracy +/- 0.03 mm (Rose Pink)
【GLOW PLA FILAMENT】Contains 30% luminous powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 1 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect..
【DIMENSIONAL ACCURACY】1.75mm diameter,1kg pla spool,recommended extrusion/nozzle temperature: 190°C - 230°C,dimensional accuracy + / - 0.03mm. Advanced CCD diameter measuring and self-adaptive control system provide a smooth printing experince.That is perfect for PLA filaments..
【PREMIUM QUALITY 1.75MM PLA FILAMENT】Uniform winding of 3D printer filament free of getting tangle.Full mechanical winding and strict manual examination guarantee the PLA filament is tidy and easy to feed. To avoid being tangled, insert filament end into spool holes after every use.Strong layer adhesion leads to the first perfect printed layer..
【PACKAGING 】Vacuum packaging with desiccant to keep it dry and keep out dust and foreign objects away, prevent nozzle jams..
【GIFT FOR KIDS】 Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability..
BIQU Filament Break Detection Sensor Module 3D Printer Accessories with 1M Cable for 1.75mm Filament Extruder Material Run-Out Detector for 3D Printer (Transparent)
❤【Function of Filament Detection Module】 To detect Filament in 3D printer run-out,pause detection,it automatically stops the 3D Printer when the filament runs out.Optimize the inlet port/outlet port of the material detection module, to reduce the resistance of the feeding material..
❤【Filament Break Detection Module】When there is material, the level signal of the detection port should be high level. When there is no material, the level signal of the material port goes low, and the system detects one. If the high-to-low transition is determined, the material is considered exhausted and a pause command is executed..
❤【Detection Method】The material detection module uses the level jump detection method..
❤【Filament Size】 It Suitable for 1.75mm Filament with 1m cable which making your printing work goes smooth and relieved..
❤ 【After-Sales Guarantee】We support high quality after-sales Service,any questions or feedback please contact us,no matter what refund or resend. We will satisfy with your request..
Snapmaker Glow in The Dark PLA Filament 1.75mm, 3D Printer Filament 1kg Spool (2.2 lbs) Dimensional Accuracy +/- 0.03 mm 1 Pack
Glow in The Dark PLA Filament: This Snapmaker filament contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but please attention that too long exposure time may damage the glow filament..
High Dimensional Accuracy: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee Snapmaker Glow in The Dark PLA filament to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.03 mm.
Clog-Free, Bubble-Free, and Easy to use: Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Snapmaker glow filament. Vacuum sealed with desiccants in a transparent bag, no bubble, and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking..
Wide Compatibility: Snapmaker glow in the dark PLA filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75mm Wood glow filament..
Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer
The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
100% brand new and original Creality exturder. If you have any question, please feel free to contact us..
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Purple PLA PRO (PLA+) 3D Printer Filament Refill Bundle
A 3D Printer accessories combo - 1.75mm Purple PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Refill Filament Specs: Purple - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
