Best Single Color Led Board

MEC Brass Washer Replacement 304W

  • True 16 AWG LED strips extension cable from TyumenDirect that is ideal for all single color LED strip light, low voltage single color led strip, light....
  • It is widely used for various DC electrical hookups, low voltage cables, 12V DC, 24V DC, low-loss in-home or car stereo installs. Great for in-home....
  • The jacket material is flexible and environmental friendly PVC. Well protected against dampness, such as convenient peel and cut..
  • Wire comes wrapped around a hard plastic spool that makes dispensing convenient. 2 jacket colors make for quick and easy to distinguish the polarity &....
  • 100 ft / spool (100FT Red & 100FT Black), actual length is 31m, longer than described, stranding structure makes it flexible and easy to install, cut....
Check Stock

Dong-a 5 Color Fluorescent Neon Liquid Dry-erase Marker Pen Set for LED Black Menu Board,acrylic, Window (Green, Orange, White, Yellow, Blue)

  • 5 color Set / Vivid color / For Smooth writing feeling / Square Tip / No Smell / Water based ink.
  • For Special use on black Acrylic Board (LED Menu Board/Window/Acrylic board).
  • Compact Size : 4.7" x 0.6" x 0.6" (120mm x 15mm x 15mm).
Check Stock

Alpinetech PLB12M 12mm 1/2" 120V AC LED Metal Signal Indicator Pilot Dash Light (Green)

  • Mount Hole Diameter: 0.31 inch / 8mm (drill an appropriate sized hole around 8 mm) Wire Detail:24awg, Length: 7.9inch / 20cm.
  • Led Overview: 5 Single Color each 2 pcs Total 10 pieces,Including Colour White Red Green Blue Yellow, Viewing Angle: 30 Degrees, Colored Round 5 mm Small Lens.
  • Voltage: 12 V(5V 6V 9V 12vdc for Different Brightness), Current: 20mA, Wattage: 0.24W( 0.25W ), Polarity: Anode "+" (Orange Wire) | Cathode "-" (Black Wire) leddiode.
  • Resistor: 560 Ω ohms, 1/4W 0.25W (discrepancy: ±1%), Resistor Leg Width: 0.5mm, Pre Soldered Wired with Cable.
  • Compatible with: Panelmount Dash Board Indicator,Car Lighting,Footwell,grill,Brake Light,Turn Signal Light,Boats,Architectural Lighting,DIY Hobby,Replacement Bezel Clip Holder,.
Check Stock

Living in the Light (feat. Eric Golub)

  • 【New Design】:New designed Led Double Panel Line Board with Ajustment Holder,dent removal painless repair Panel for dent..
  • 【Product Dimensions】:8.3 inch*13 inch.nput Volts:12V DC light. Pump suction cups diammeter 2.5 inch.
  • 【Two Color Modes】:This LED reflectoer line board has two diiferent colors on both sieds:one is white black and the other is yellow black. You could choose the one that have the most clear result for detect the dents..
  • 【Easy to Operate】:Its for aligning the reflected lines of the board to a dent. The reflection becomes distorted where the dent is and you can then work your tool behind the dent to make the distorted image even or uniform again, once the distorted image or lines become parallel in the reflection you have successfully removed the DENT!.
  • 【Good Function】:This model can be attached to a vehicle using its STRONG SUCTION CUP BASE on FLAT METAL, GLASS and PLASTIC areas. (THE SUCTION CUP MAY VARY IN COLOUR DEPENDING ON AVAILABILITY) Using the line board takes much practice to understand but once mastered, you’ll discover incredible detail. A key importance is to keep your board at a 45 degree angle. The thinner the lines, the more detail you will notice..
Check Stock

Thermaltake Level 20 MT Motherboard Sync ARGB ATX Mid Tower Gaming Computer Case with 3 120mm ARGB 5V Motherboard Sync RGB Fans +1 120mm Rear Fan Pre-Installed CA-1M7-00M1WN-00 Black

  • Light up the system: 3 Pre installed 120 millimeter 5V MB Sync ARGB fans (Sync with Asus, Gigabyte, MSI) +1 rear black fan.
  • Built in dual mode 5V ARGB switch board: control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard.
  • 27 LED modes through I/O port button: wave mode.
  • Radar mode (Red, yellow, green, Cyan, blue, White, Purple).
  • Clear view of PC gaming: Two 4 millimeter tempered glass (left & Front) with standard mounting.
  • Built in PSU cover: Cover all your cables for a professional look.
Check Stock

TFD Supplies Wholesale Bulk Earbuds Headphones 50 Pack for iPhone, Android, MP3 Player - Black

  • With high quality, onboard 2W single channel power amplifier..
  • 4 buttons on the board for setting operation..
  • Support MP3 format, playing power on automatically, LED indocator light when module is working..
  • Mp3 lossless decoders power amplifier Mp3 player module Mp3 decoder board support TF card and USB..
  • Support TF Card (mobile phone memory card), U disk playback mode With the speaker terminals without welding..
Check Stock

Montessori Toddler Busy Board, Baby Wooden Busy Board with 8 LED Light switches, Sensory Toys Light Switch Toys Travel Toys for 1+ Year Old Baby and Toddler

  • 【Well Designed】This busy board is specially designed for toddlers who love switches and LED lights. There are 8 different switches set up on this busy board, and each switch corresponds to a different color or style of LED light. The brightness of each LED is adjusted to be just right for the baby, not too bright, too dazzling or too dark to see clearly..
  • 【Learn and Play】This Montessori Busy Board is the perfect birthday Christmas gift for kids. Toddlers can use this toddler busy board to recognize different colors and sizes. This sensory toy can exercise baby's thinking ability and hands-on ability.Please prepare 2 AAA batteries by yourself before use..
  • 【Size Suitable】The size of this product is 9*1.5*2 inches. This busy board for 1 year old is suitable for different scenarios such as at home, or on the plane, in the car, during travel. This is the perfect travel toy that will make your baby quiet down and do his own thing..
  • 【Strong and Sturdy】Unlike other busyboard production methods on the market, our sensory board is cut in one piece from logs instead of veneer glued. Each baby busy board is carefully ground by hand to ensure a smooth surface. The Busy Edition doesn't have sharp edges or any small parts that come off easily. You don'....
Check Stock

Treedix 48pcs RGB LED WS2812B 5050 Light Board Light Matrix Strip Driver Board Individually Addressable for Arduino and Raspberry Pi

  • This is a small chainable board with 48 5050 WS2812 RGB LEDs.
  • Each pixel of WS2812 is individually addressable, because the driver chip is located inside the LED, and only one IO port is needed to control multiple LEDs..
  • There are pads on the back for connecting wires or breadboard pins to fix the board to many different surfaces. Applications: Full-colour module, Full-color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen..
  • The wiring is simple and easy to control. It can output some full-color LED lights after quick soldering. It is compatible with Arduino, Raspberry Pi, Teensy, T1000S, K1000C and other programmable controllers..
  • There are connection interfaces at both ends, which can be directly plugged and unplugged, and can be used alone and combined into different shapes. The serial connection interface can complete data reception and decoding through a signal line. The library and code are easy to use and operate.
Check Stock

Nitecore MT2A CREE XP-G2 R5 LED 345 Lumen Multi-Task Flashlight, Black

  • Two preset modes and four selectable brightness levels.
  • Compact size combined with high performance make the MT2A an ideal easy-day-carry flashlight.
  • custom designed high efficiency reflector provides a versatile beam profile of both flood and throw.
Check Stock

Thermaltake Commander C33 Motherboard Sync ARGB ATX Mid Tower Computer Chassis with 2 200mm ARGB 5V Motherboard Sync RGB Front Fans + 1 120mm Rear Black Fan Pre-Installed CA-1N4-00M1WN-00

  • Light up the system - 2 Pre-installed 200mm 5V MB Sync a RGB fans (Sync with as US, Gigabyte, MSI, ASROCK) +1 rear Black fan.
  • Built-in dual-mode 5V ARGB switch board - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard.
  • 27 LED modes through I/O port button - Wave mode.
  • Radar mode (Red, yellow, green, cyan, blue, White, Purple).
  • Clear view of PC gaming - one 4mm tempered glass with standard mounting.
  • Built-in PSU cover - cover all your cables for a professional look.
Check Stock