ACEIRMC 5pcs 12 Bit WS2812 WS2812B Full Color 5050 RGB Lamp Panel Round LED Ring Lamp Light for Arduino (12 Bit)
4-7V Intelligent reverse connect protection.
the power supply reverse connection does not damage the IC The control circuit and the LED share the only power source Control circuit and RGB chip are integrated in a package of 5050 components.
form a complete control of pixel point Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate Built-in electric reset circuit and power lost reset circuit Each pixel of the three primary color can achieve 256 brightness display.
completed 16777216 color full color display, and scan frequency not less than 400Hz/s Cascading port transmission signal by single line Any two point the distance more than 5m transmission signal without any increase circuit When the refresh rate is 30fps, cascade number are not less than1024 points Send data at speeds of 800Kbps The color of the light were highly consistent, cost-effective.
Wattage:0.7W Applications Full-color module, Full color soft lights a lamp strip LED decorative lighting, Indoor/outdoor LED video irregular screen.
Garbage Disposal Air Switch Kit Sink Top Waste Disposal Long Stainless Steel Brushed Nickel On/Off Air Button Food and Waste Disposals Part by Etoolcity
Upgrade Version: We redefined the air switch, made of real stainless steel, never worry fade away and fall off, more elasticity and flexiable.
Two Power Module Installation Methods: You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong.
Safety & Security: The power module allows any garbage disposal power cord to fit safely and securely without any issues. The power line is attested by UL for security and long-term use.
Easy To Installe Air Button: Just drill a not less then 1-1/4 diameter hole in the sink, counter-top or front of the sink cabinet, place the rubber gasket between the push button and the top of the sink counter. Tighten the plastic nut under the sink counter to ensure a watertight seal.
Air switch kit includes: Single outlet power module, 5 ft long air tube, 2.5 ft power cable, long(2.7'') stainless steel brushed nickel air switch button, set screws and strong nano-markless hook sticker.
Adamanta 16GB (2x8GB) Apple Memory Upgrade Compatible with Late 2015 iMac 27" Retina 5K Display DDR3/DDR3L 1867Mhz PC3L-14900 SODIMM 2Rx8 CL13 1.35v RAM DRAM
Compatible with: MK462LL/A, MK482LL/A, MK472LL/A, refurbished, and all built to order late 2015 iMacs 27 inch with 5K Retina Display..
16GB ( 2x8GB ) DDR3L 1867 Mhz Late 2015 iMac Unbuffered Non-Parity SDRAM 204pin Low Voltage Dual Rank Module. Works with all iMacs with Skylake Processors. This module works for 27" late 2015 iMac's of every spec..
Every module is backed by a limited lifetime warranty. We always have hundreds in stock! Free technical support from our Apple Expert technicians..
Every single module is fully tested by the manufacturer..
Our experienced technicians can verify if these parts will work for you..
IRONWALLS 2 Packs Storefront Light 100ft, 400 Pieces 3 LED SMD5050 LED Module Light for Windows, Colorful Waterproof Window Strip Light Business Decorative Light for Advertising Sign, Store, Party
✨【Super Bright LED Module Light】IRONWALLS rgb led module light is designed with 3pcs premium SMD5050 LED beads for each module, which offers stable & bright lights to your store front, shop, advertisements or advertising letter signs. What’s more, the working voltage of this super bright LED strip lights is DC 12V.
working power is 150W (0.72W per module), super low power consumption..
✨【Business Decorative Lights with Sufficient Length】This storefront led lights set includes 2 packs of window led lights 100ft/30m per pack, which the overall length is 200ft/60m. LED module quantity: 20pcs x 10 strings per pack, totally 400pcs LED modules. Long enough to decorate your storefront window, countertop, advertising sign or anywhere you need attractive & eye-catching light. Besides, the LED module strip light can be cut to any length for your different needs..
✨【Color & Mode Adjustable】There are 20 different color forms with the lights: red, white, green, blue, yellow, purple, turquoise, etc.
various dynamic modes: Gradual Change 7/3 Colors.
Flash. And all of these are effortlessly controlled by a wireless remote control. Different festivals, events, occasions, you can choose different colors to decorate your store or....
HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot
☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
NOYITO Voltage to Current module, 0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V voltage signal conversion to 0-20mA or 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.003cbr003e.
Implement the industry standard voltage (0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.003cbr003e.
Using single-chip embedded technology. The module is small and easy to use in different places.003cbr003e.
Easy to use, can be fine-tuned by potentiometer.003cbr003e.
Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】003cbr003e.
AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board
【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Treedix GM328 Transistor Tester Frequency Tester PWM Square Wave LCR Meter Voltmeter Full Color Screen Graphics DIY Kit with Acrylic Case
The display unit uses a 160x128 pixel color display, the entire screen has 8x20 characters, a color depth of 16 bits, and the graphics are displayed as component symbols..
Automatically detect NPN and PNP transistors, field effect transistors, diodes, dual diodes, thyristors, thyristors, and automatically determine the pinout of the above transistors..
Use the single-chip ATMEAG328P DIP-28. With IC Block..
Can use a 9V stacked battery for power supply, or use power adapter for power supply, the current of the whole module is about 30mA, and the current after shutdown is about 20nA..
